UL1277 600V 12/5 XHHW-2 Copper TC control cable

Port:	Tianjin port
Payment Terms:	L/C,T/T,Western Union,MoneyGram
Supply Ability:	500 Kilometer/Kilometers per Month TC cable
Place of Origin:	Hebei China (Mainland)
Brand Name:	REN DA
Model Number:	TC cable
Application:	Instrumentation
Conductor Material:	Copper
Jacket:	PVC
Insulation Material:	XLPE
Product Name:	XHHW-2 PVC Control Cable
Certificate:	UL ISO
Standard:	UL1277
Conductor:	bare copper
core:	THW THHN TFFN XHHW RHH
Insulation:	PVC+NYLON
Voltage:	600V
cores:	2,3,4,5,6,7,9,10,12,15,16,19,20 37
size:	14AWG 12AWG 10AWG 8AWG
sheild:	Aluminum-plastic composite
Delivery Detail:	within 20days after receiving your deppsit
Packaging Detail:	standard export drum

Product Description

UL1277 600V 12/5 XHHW-2 Copper TC control cable

TOP TEN CABLE MANUFACTURER/EXPORTER IN CHINA
LARGEST CABLE MANUFACTUER IN NORTH CHINA
ANNUAL EXPORT VOLUME EXCEED 200MILLION USD
WITH UL,TUV,KEMA,CE,BV,PSB,SABS,LLOYD'S,GL,NK,KR,ABS PRODUCTS CERTIFICATIONS
WITH TUV TYPE TESTING REPORT
WIDE PRODUCTS RANGE
ISO9001,ISO18001,OHSAS18001 SYSTEM CERTIFICATIONS
CNAS APPROVAL LABROTARY

CONSTRUCTION:

1. Conductor: 7 strands class B compressed bare copper per ASTM B3 and ASTM B8

2. Insulation: Cross Linked Polyethylene (XLPE) XHHW-2, 30 Mils thick for all cable sizes

3. Grounding Conductor: Class B compressed stranded copper with green insulation

4. Filler: Polypropylene filler on cables with 5 or less conductors

5. Binder: Polyester flat thread binder tape applied for cables with more than 5 conductors

6. Overall Jacket: Polyvinyl Chloride (PVC) Jacket

APPLICATIONS AND FEATURES: 600 Volt Type TC-ER control cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10.

SPECIFICATIONS: • ASTM B3 – Soft or annealed copper

• ASTM B8 – Concentric-lay-strandard copper

• UL 44 – Thermoset Insulated wires and cables

• UL 1277 – Electrical Power and Control Cable, VW-1

• UL 1685 – Flame Test • UL 1581 – Electrical Wires, Cables and Flexible Cords

• IEEE 1202/FT4 – Vertical Tray Flame Test (70,000 Btu/hr) and ICEA T-29-520 – (210,000 Btu/hr)

• ICEA S-73-532 – Standard for Control, Thermocouple Extension and Instrumentation Cables

• ICEA S-58-679 – Control Cable Conductor Identification Method 1 Table 2 • ICEA S-95-658 NEMA WC70 – Power cables rated 2000 volts or less for the distribution of electrical energy

4 Data sheet

Packaging & Shipping

UL certificate

We are one of China top rank cable&wire manufacturer.Our products meet standards of GB, IEC DIN ASTM, JIS, NF, AS/NZS CSA GOST and so on. We also have obtained ISO9001,ISO14001,OHSAS18001, UL,CE,

KEMA, TUV, SABS,PBS,Bureau Veritas, Lloyd,GL,NK,KR certifications.

We have obtained UL certifications for TC cable, DLO cable,RHH/RHW/RHW-2,XHHW/XHHW-2/SIS, THHN,SER/SEU/USE, MV-90/MV-105,MC cable,AC cable,TECK 90,SOOW,Welding cable,Mining cable,type DG,PV cable,Shipboard cable and so on.

Company Information

Hebei Huatong Wires and Cables Group Co., Ltd was established in 1993, covering an area of 230, 000 square meters. We own more than 420 sets manufacturing equipment and 250 sets of testing equipment or apparatus. Our annual production capacity is 5 billion Yuan.We have 1200 employers, among which 150 are technicians. Based on the scientific management, now we are a comprehensive, large-scale enterprises in wire and cable industry.Voltage up to 35KV, including X L P E power cables,PVC power cables, mining cables, rubber cables for general purpose, Submersible oil pump cables, solar cables, shipboard cables,lead sheath cables, aerial cables, control and instrument cables, special cables etc.Products are exported to USA, Australia, Singapore, Europe, South America, Middle East, Asia, Africa. CNAS accredited national level laboratory.

Laboratory

CNAS accredited national level laboratory.

Our Services

1.25 years production experience and 16 years export experience .
2.Products certification :UL,CE,BV,TUV,KEMA,PSB,SABS,ABS,NK,LR,KR,GL etc
3. OEM service available based on official & legal authorization.
4.Strict quality control system.
5.Rapid delivery and feedback Faster lead time than our competitors.
6.Excellent quality with reasonable price.
7.Strong technical support (technical data, drawing, etc.)
8.Professional teamwork service for you actively.
9.Stock available, Free sample is available.

FAQ

(1).When can I get the price?
We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your e-mail so that we will regard your inquiry priority.

(2).How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

(3).How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express account or prepay us if you do not have an account.

(4).What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.

UL1277 600V 12/5 XHHW-2 Copper TC control cable

Contact us

Search

You May Like