PVC Jacket and XLPE Insulation Material power cable aluminum XLPE 3x240 3x120 10 kv for power distribution and transmission

PVC Jacket and XLPE Insulation Material power cable aluminum XLPE 3×240 3×120 10 kv for power distribution and transmission

0.6/1kV XLPE Insulated Power Cables

1. Main Application

XLPE(Cross linked polyethylene) cable constitutes the best cable for transmission and distribution lines because of its excellent electrical and physical properties. These cables has the advantage of simplicity in construction, lightness in weight; convenience in application besides its excellent electrical, thermal, mechanical and anti-chemical corrosion properties. It can also be laid with no limitation of level difference along the route.

2. Standards

 GB/12706-2008, IEC60502,IEC 60228,IEC60332 BS 5467,BS 6622 , IS 1554 , IS 7098and ICEA S-66-524 ect.

*Hongda cable can also design and produce for special application requirement.

3. Product Properties

The product is suitable for power transmission and distribution lines with rated power frequency voltage 0.6/1 kV .

3.1 Rated voltages: 0.6/1 kV

3.2 The ambient temperature for installation: ≥0℃

3.3 Maximum conductor temperature in normal operation:≤90℃

3.4 Max operating temperature of con. When cable short-circuited(5s maximum duration): 250℃

3.5 Permissible minimum bending radius:

Single unarmoured cable: (20D±5%)mm

Multi-core unarmoured cable:(15D±5%)mm

Single armoured cable: (15D±5%)mm

Multi-core armoured cable:(12D±5%)mm

Note : D=over cable diameter

4. Product Type

5. Range of production

No.of cores : 1, 2, 3+1, 4, 5 ,4+1, 3+2 Nominal cross-section (mm2):1.5-630

     a,The armoring materials of single core cable should use nonmagnetic materials.

     b,Our company can produce “Flame-RetardantSeries”, “Fire-Resistant Series”, “Low Smoke Halogen Free (LSHF/LSOH) Series”,“Low Smoke Low Halogen (LSLH) Series”, etc. power cable as customer required.

Performance in line with IEC60332,IEC 61034,IEC60754 requirements.

6. Construction

6.1  XLPE insulated Power Cables for rated voltages up to and including 0.6/1kV

Conductor shaped:RE=circular solid,CC=compacted circular stranded,SM=sector shaped stranded

Conductors: Plain circular, compacted or shaped stranded copper or aluminium conductor

Insulation:XLPE (cross-linked polyethylene) rated at 90°C

Colour identification

1 Core : Red or Black

2 Cores : Red, Black

3 Cores: Red, Yellow, Blue

4 Cores: Red, Yellow, Blue, Black

5 Cores: Red, Yellow, Blue, Black, Green

Above 5 Cores: Black Cores with White numerals

The above identifying can be changed as order

Assembly /Inner Sheath: Two, Three or Four insulated conductors are laid-up together with non-hygroscopic fillers and the assembly is bedded with an extruded layer of PVC. In case of non-armoured cables, this layer may be omitted

Armour: Aluminum/Galvanized Steel Wires, single core cables shall be Aluminium wire armour, Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.

Outer Sheath: Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE, LSZH, and CPE are available on request.

Fire Performance of Cable Sheaths

Cables can be supplied with special flame retardant PVC outer sheath to comply With the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, we can also supply cables with Low Smoke Halogen Free (LSHF) material according to IEC 60502-1, BS 7211, BS 6724 or other equivalent standards.

6.2  XLPE insulated  Power Cables for rated voltages up to and including 3.6-35kV

Conductor: Plain annealed stranded compacted circular copper or aluminium conductor to IEC60228 class 2

Conductor Screen:Extruded semi-conductive compound

Insulation:XLPE (cross-linked polyethylene) rated at 90°C

Insulaton Screen:Extruded semi-conductive compound

Metallic Screen:copper tape ora concentric layer of copper wires

Colour for core indentification:Red,Yellow ,Blue tape shall be applied between insulation screen and metallic screen( The above identifying can be changed as order)

Assembly : Three screened cores are laid up together ,if necessary filled with non hygroscopic material compatible with insulation and covered with a layer of PVC sheath

Inner Sheath:Extruded layer of PVC ST2 or PE , LSZH

Armour: Double of galvanized steel tape or galvanized steel wire for three core power cable ,Double of aluminium tape or aluminium wire for single power cable

Outer Sheath: PVC type ST2 to IEC 60502 or PE ,LSZH

Single core, CU or AL conductor, XLPE insulated, PVC sheathed Power Cable, 0.6/1kV to IEC60502-1        

0.6/1kV PVC Insulated Power Cable

1. Main Application

PVC insulated cables are used for power distribution and transmission, building, appliance, flexible cord and machine tool. Insulation and jackets made from PVC which has a number of desirable properties inculding flexibility, resistance to temperature, resistance to adverse environmental situations and low cost.

2. Standards

GB/12706-2008, IEC60502, IEC 60228,IEC60332,BS 6004, AS/NZS 5000.1 ect.

*Hongda cable can also design and produce for special application requirement.

3. Product Properties

3.2 The ambient temperature for installation: ≥0℃

3.3 Maximum conductor temperature in normal operation:≤70℃

3.4 Max operating temperature of con. When cable short-circuited(5s maximum duration): 160℃

3.5 Permissible minimum bending radius:

Single unarmoured cable: (20D±5%)mm

Multi-core unarmoured cable:(15D±5%)mm

Single armoured cable: (15D±5%)mm

Multi-core armoured cable:(12D±5%)mm

Note : D=over cable diameter

4. Product Type

Performance in line with IEC60332,IEC 61034,IEC60754 requirements.

5. Construction

Conductor shaped:RE=circular solid,CC=compacted circular stranded,SM=sector shaped stranded

Conductor: Plain circular ,compacted or shaped stranded copper or aluminium conductor ,conform to IEC60228 CLass 1 or 2 

Insulation:PVC Compound Insulation

Colour identification :

1 Core: Red or Black

2 Cores: Red, Black

3 Cores: Red, Yellow, Blue

4 Cores: Red, Yellow, Blue, Black

5 Cores: Red, Yellow, Blue, Black, Green

Above 5 Cores: Black Cores with White numbers

The above identifying can be changed as order

Bedding /Inner Sheath : PVC Compound

Armour: Aluminium wire, Galvanized steel wire or Steel tape

Outer Sheath: PVC or PE Compound

6. Range of Production

7. Product Parameters

Copper or Aluminium Conductor PVC Insulated PVC Sheathed Unarmoured Power Cables For rated voltage up to and including 0.6/1kV

Table   Single-core, CU or AL conductor, PVC insulated, Unarmored, PVC sheathed Power Cable, 0.6/1kV to IEC 60502-1

Click and Ask for Price Online

Weights and dimensions will vary from manufacturer, if critical please check at time of order.

Other conductor sizes and core counts are available upon request.

Power Cable Markings

All 4 core armoured Cable will carry the following items on the surface print:

Manufacturers Name
Electric Cable
Voltage Designation
British Standard Number
Cross Sectional Area
No. of Cores
Type of Cable
Date
NOTE: Items 1 to 4 will also be embossed on the Oversheath of the cable

Some special cable marking accept customized.

Power Cable Application:

Company & Certification:

The package of  power Cable.

1. Export wooden drum, wooden iron drum and other export standard package

2. Each Drum 1000m or depending on customized.

3. Then pack by plastic kitting bag or plastic film.

4. Fixed with plank or board.

Any other information of pls contact with me:

Vivian Yuan | Sales Director
Zhengzhou Hongda Cable CO., LTD.
Landline: +86 371 6097 5616 | Fax: +86 371 6097 5616
Email: sale04atzzhongdacable.com.cn | Skype ID: xinyuanyy
Cellphone/WhatsApp/Wechat/ICQ: +86 158 3829 0725 
Address: Houzhai Industrial Park, Erqi Zone, Zhengzhou, China,450000