YJV 0.6/1kV 5x185mm2 power cable

YJV 0.6/1kV 5x185mm2 power cable is used for transmit and distribute power in power transmission and distribution system of 35kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

YJV 0.6/1kV 5x185mm2 power cable can be produced according to our factory specification which is equivalent to the standard IEC60502.The factory can also design and manufacture special power cable according to the other standards required by the customers.

Calculation condition of the ampacity ambient temperature is 25℃

Conductor working temperature is 90℃

Soil heat resulted from water migration when it operates continuously.

Gap between axis of cable and surface of ground is 1000 millimeter when it is laid in ground.

For multi-core cable, gap of axis of cable is 3 times O.D.

0.6-1kv/3-35kv PVC insulation power cable (without armour /STA armour/SWA armour)

0.6-1kv/3-35kv XLPE insulation power cable (without armour /STA armour/SWA armour)

Aerial bundled cable,

AAC, AAAC, ACSR, etc.  

Nominal Cross-sectional Areas:

1.5 mm2, 2.5 mm2, 4 mm2, 6 mm2, 10 mm2, 16 mm2, 25 mm2, 35 mm2, 50 mm2, 70 mm2, 95 mm2, 120 mm2, 150 mm2, 185 mm2, 240 mm2, 300 mm2, 400 mm2, 500 mm2, 630 mm2, 800 mm2

Production range:

Single core electrical cable: from 1.5 mm2 to 800 mm2,

Multi-core electrical cable: from 1.5 mm2 to 400 mm2

Hongliang Cable Co., Ltd.(Headquarters)