xlpe/pvc cable 4mm2 copper conductor 4 core power cable

Port:	Tianjin
Payment Terms:	L/C,T/T
Supply Ability:	80000 Meter/Meters per Day for xlpe/pvc cable 4mm2 copper conductor 4 core power cable
Place of Origin:	Hebei China
Brand Name:	Hao Hua
Model Number:	VV
Insulation Material:	PVC
Type:	Low Voltage
Application:	Construction
Conductor Material:	Copper
Jacket:	PVC
Product:	xlpe/pvc cable 4mm2 copper conductor 4 core power cable
Standard:	IEC 60502, BS 7870, GB/T12706
Cores:	1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E
Range of Nominal cross section:	1.5 mm2 ~ 630 mm2
Type:	VV22, VLV22, Cu/PVC/STA/PVC, Al/PVC/STA/PVC
Voltage:	0.6/1 kV
Conductor:	Class 1/2 annealed bare copper solid or strands
flame retardance, fire resistance:	optional for xlpe/pvc cable 4mm2 copper conductor 4 core power cable
Samples:	always free
OEM service:	available
Delivery Detail:	Within 5~12 working days
Packaging Detail:	Steel drum /wooden drum for xlpe/pvc cable 4mm2 copper conductor 4 core power cable or as per your requirement

Product Description

Picture for xlpe/pvc cable 4mm2 copper conductor 4 core power cable

PVC power cables (plastic power cable) is one of high quality products of our company. The product not only has good electric capability, but also has good chemical stabilization, simple structure, easy to use, and the laying of cable do not be limited by the fall. It is widely used at the transformer circuit which rated voltage is 600V or under.

The product can be produced against the standard of IEC60502 and IEC60331, BS 6346, DIN VDE 0271, and the standard required by the clients.

1. The long-term permissible operation temperature of the conductor shall not be higher than 70

2. The max temperature of the conductor of cable should less than 160 when short circuit. (less than 5 second)

3. The cable is not limited by drop in level when being laid, and the environment temperature shall not be lower than 0

4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame retardant.

5. Light weight, perfect bending properties, installed and maintained easily and conveniently

Specifications for xlpe/pvc cable 4mm2 copper conductor 4 core power cable

Type	VV22, VLV22, Cu/PVC/STA/PVC, Al/PVC/STA/PVC
Voltage	0.6/1 kV
Cores	1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E
Range of Nominal cross section	1.5 mm2 ~ 630 mm2
Standard	IEC 60502, BS 7870, GB/T12706
Constructions	Conductor:	Class 1/2 annealed bare copper solid or strands
	Insulation:	PVC
	Armour:	STA (Remark: for single core the armour should be ATA or SSTA)
	Sheath:	PVC or PE
Max. Operating Temperature	70 ℃, can be 90 ℃ and 110 ℃ as per requirement
Packing	Wooden drum or as per requirement
Production Capacity	30 kilometer / day
MOQ	1000 meters for small size, 500 meters for big size.
Delivery time	10 ~ 15 working days
Remark	The cable can be of flame retardance, fire resistance, environment friendly or other property

Applications for xlpe/pvc cable 4mm2 copper conductor 4 core power cable

It applies to electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1 kV. For outdoor and indoor installation in damp and wet locations, laid directly in the ground where

excessive mechanical stresses are present in sloping and moving terrains and in vertical or inclined laying, as well as in locations susceptible to sliding.

Inspection Quality System for xlpe/pvc cable 4mm2 copper conductor 4 core power cable

Sparker tester,Heating aging Chamber,High resistance machine, Oxygen index equipment, Partial ischarge inspection instruments, Fireproof testing device,High-power voltage withstand tester,No-rotor Vulkameter,Pull tester,Analytical balance,Direct current bridge,Plastic tester,Projector, Punch machine,Cross-linked cutting machine,etc.

Productive Process

Company Information

About us

Hongliang Cable Co., Ltd.
Established Year: 1988
Registered capital of RMB: 201,800,000
Total assets : 28.7millions
Factory Area: 45425 mm2
Manufacturing Capacity per year: 250000km
Number of Employees: 460

Packaging & Shipping

Packing & Shipping for xlpe/pvc cable 4mm2 copper conductor 4 core power cable

Cable should be supplied in Steel drum. Cable piece length should be of 500 meter length or as specified

by the customer at the time of order.

20-30 working days or as to the buyers' request .

Many transports ways at your option.

FAQ

1. Which payment terms do you accept?
a) 30% DEPOSIT IN ADVINCE,BANLANCE AGAINST THE COPY OF B/L.
b) 100% L/C at sight.
2. What is your MOQ?
You are advised to please confirm it with us directly as it’s based on different cables.
Usually it’s 100 meters for Medium Voltage Cables.
3. What about your delivery time?
According to the order’s quantity . Usually is 15 – 30 working days.
4.How to packing the goods ?
Usually in wooden drum or steel wooden drums .The cable wire is usually coiled.
5.How to buy power cable if the type is unknown
Please tell me the application, we will help you find the type most appropriate.
6.The warranty
Oversea technical service center 24 hous available