XLPE insulated UnArmoured 5 Core (3x120mm2+2x70mm2) Power Cable
Construction of power cable
-Conductor: Solid or stranded Aluminum
-Insulation: Cross-linked polyethylene( XLPE or PVC)
-Circuit identification: The insulation shall be red, black
-Filler: Polypropylene lament with lapped binding tape
-Inner Sheath: Polyvinyl chloride (Black)
-Armor: Galvanized steel wire/steel tape/Unarmored/Aluminum wire
-Core-covering: Binding tape
-Outer Sheath: Polyvinyl chloride (Black)
Standards of power cable
Our xlpe insulated power cables is manufactured in accordance with the standards of GB/T12706-2008 IEC 502. It can also be produced according to special requirements put forward by clients.
Operating characteristic for power cable
1.The highest allowed operating temperature of conductor for long-term working is 90 degrees.
2.In short circuit (Max long term is no more than 5 seconds). The highest temperature for conductor is no more than 250 degrees.
3.The cable is laid without horizontal drop limit. The environment temperature should be no lower than 0 when lay. Otherwise it should be preheated.
4.Excellent electrical performance, resistance to chemical corrosion.
5.Can stand advisable traction when laid.Can stand traction from Outside.Left low smoke halogen-free after burned.Retard the burning of the cable.
Wendy Jiang- Sale engineer
TEL: 0086-531-88814697
FAX: 0086-531-88876156
MOB: 0086-18253153062
SKYPE:hongliangcablesales3
EMAIL: wendy(at)hldlcable.com
Send Your Inquiry Details in the Below for Free Sample, Click "Send" now!
