Single core cable sizes 16mm 25mm 35mm 50mm 70mm 95mm 120mm 150mm 185mm
Brief Introduction for single core cable
Single core cable 16mm 25mm 35mm 50mm 70mm 95mm 120mm 150mm 185mm is applicable for power transmission through the power line of rated voltage 1kV and below, and it is proper to lay these cables in the fixed places, such as hotels, stations, chemical engineering and oil platforms, mines, power plants, metros, and high buildings, etc.
Characteristics for single core cable :
1)Rated voltage U0/U : 0.6/1kV
2)Maximum conductor temperature is 90°C
3)Short circuit temperature (lasting for less than 5s):less than 250 °C
4)Ambient installation temperature shall be not lower than 0°C; minimum bending radius: for single-core cable,20(D+d)(mm), for multi-core cable, 15(D+d)(mm)(D=cable outside diameter, d= nominal diameter of main conductor).
5) Cable can be laid aerially, in trough, or underground
Producr range of XLPE insulated single core cable 16mm
|
Type |
Cu/XLPE/SWA/PVC, Al/XLPE/SWA/PVC |
|
|
Voltage |
0.6/1 kV |
|
|
Cores |
1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E |
|
|
Range of Nominal cross section |
1.5 mm2 – 630 mm2 |
|
|
Application |
XLPE insulated electrical cable applies to electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1 kV. For laying indoors, in tunnel, cable trench, well or direct in ground, able to bear external mechanical forces, and certain force |
|
|
Standard |
IEC 60502, BS 7870, GB/T12706 |
|
Picture of XLPE insulated single core cable
Wendy Jiang(Sales Engineer)
SKYPE : hongliangcablesales3
TEL: 008618253153062
WEBSITE: http://en.h-l.cn
