Rubber Copper 50mm2 Welding Cable
1, Application of welding cable
Electrical welding machine cables are flame retardant, oil resistant, resilient, resists compression cuts and abrasion,
durable, and survives rough handling.
Designed for use as arc welding leads from the secondary side of the powersource, typical of welders and welding generators. Not for primary voltage.
2, Construction of welding cable
Electrical welding machine cables are manufactured using annealed rope-stranded bare copper conductor as per ICEA S-75-381.
A paper tape separates the conductor insulation. A medium-duty EPR jacket is extruded onto the cable.
EP or Hypalon jackets are available. 600 volt spark tested.
3, Standard of welding cable
ASTM B-3 ASTM B1732, ICEA S-175-381, IEC 254-1.
4, Specification of welding cable
Medium Duty jacket made accordance with ICEA S-75-381 – Portable and Power Feeder Cables for Use in
Mines and Similar Locations or IEC 245-1 600 Volt Spark tested
5, Technical data of welding cable
|
Conductor Size (AWG) |
Conductor Stranding (#/AWG) |
Nominal Resistance of Conductor at 25°C (Ohms / 1000 ft) |
Nominal Thickness of Insulation (Inches) |
Nominal overall Diameter (Inches) |
Approximate Net Weight (LBS/1000 Ft) |
|
2 |
652 / 30 |
0.167 |
0.071 |
0.480 |
260 |
|
1/0 |
1043 / 30 |
0.105 |
0.079 |
0.570 |
400 |
|
2/0 |
1297 / 30 |
0.0842 |
0.079 |
0.640 |
500 |
|
4/0 |
2065 / 30 |
0.0530 |
0.079 |
0.770 |
760 |
welding machine cable
welding machine cable
Soft packing 100M/Coil, 122M/Coil, 300M/Coil, 500M/Coil
electrical welding machine cable delivery
