LKSM-HF Armoured power and control cable 0,6/1kV 70 /95 /120 /150 /185 /240mm2
Application and Description :
0.6/1KV , XLPE cable 4 core is for Iindustrial wiring and mains distribution. Can be laid direct in the ground, or in ducts, clipped to surface, on trays or in free air. May be embedded in concrete.
Standards: IEC 60502 / BS 5467
Design
Conductor: stranded circular copper – class 2 according to IEC 60228 / BS EN 60228:2005
Cores: 1C , 2C , 3C , 4C , 5C , 3C+1E , 4C+1E ,3C+2E
Insulation: XLPE- cores identification by colours
Filler: Laying up with fillers
Inner sheath: PVC
Armour: steel or steel tapes (possible hard aluminium wires)/ Copper wire braid
Outer sheath: PVC
Rated Voltage Uo/U (Um) : 0.6/1 KV
Range of Nominal cross section: 1.5 mm2 ~ 630 mm2
8AWG~4/0AWG,300MCM,500MCM,750MCM
Mechanical characteristics:
Mechanical resistance to impacts : Excellent
Cable flexibility : Rigid
Usage characteristics:
Max. conductor temperature in service: 90°C
Short-circuit max. conductor temperature: 250°C
Operating temperature, range : -25 .. 60°C
Weather resistance: Very good
Flame retardant : C2, NF C 32-070
Chemical resistance : Accidental
Water proof : Intermittent
Packaging: Cut to length
Dear friends,we can design and produce power cable with International and national standards according to your request .
