Fire Resistant Alarm Cable 2x1.5+Earth Bare Conductor

Fire Resistant Alarm Cable 

For example: 

2 x 1.25mm Core (INSULATED) + 1 x 1.25mm Earth (BARE), 
Al foil sheath with Mylar filling, 100% copper, 
Inner insulation Blue and Brown color and outer Red COLOUR (mate finished), Insulation: PVC, 
Jacket: General Flame Retradant, 
Over all Diameter 8.0 mm 
Printing on the Cable: N1017-01 Fireguard. UK FG FRC 180 pH30 2×1.5MM2 LPCB 711c/01//001m 
(97 mtr/ per roll) 
PACKING: WOODEN DRUM, DRUM SIZE(34*17), with polyester film wrap. 

Suitable for rated voltage not more than 600V, rated temperature not more than 500 degree celsius 

Nominal Voltage: 600V 

Nominal Temperature: 200° C or 450° C 

Conductor: Nickel Copper 

Insulation: Mica tape with lapping 

Jacket: Fiberglass 

Use: For kinds of electric installation for metallurgy, hot work, Petroleum, chemical industry, natural gas, kerosene, etc. Special environments 

Property: Suitable for rated voltage not more than 600V, rated temperature not more than 500° C 

Installation condition: Fixed 

Fire performance: Not fuse below 800° C with 90 minites 

Opposite temperature: 65% can use under bending and fire, no toxic and harmful gases 

PVC insulated fire resistant cable can be made according to BS, VDE, ASTM, AS, CSA standards according to customer's request. 

PVC insulated Fire resistant cables come in a variety of types and standards. All are comprehensively tested to British Standard to ensure they meet their design criteria. 

The FP Cables range of fire resistant cables contains cables for most fire applications from a fire resistant alternative to standard cable for use in metal conduits and trunking, to more specialist cable for fire alarms, fire detection circuits and emergency lighting. A good example of this is FP200 Gold® – a hard skin cable, incorporating damage resistant Insudite insulated cores. 

Much of the refinement work on these cables is not only to create further fire resistance but to improve handling and ease of installation. However, on large and complex building projects with demanding fire safety requirements an armour version fire resistant cable may be necessary – such as FP6