Covered Line Wire More Service Drop XLPE or PE insulated 600V Aluminum cable for temporary service and street light installation

 

Aluminum Covered Line Wire

Features

RUS accepted. Extruded ridges for easy Phase identification.

 

Application

For overhead distribution of electrical energy, such as a supply power, from pole-mounted transformer to the user’s service head where connection to the service entrance cable is made. Also for Temporary services and street light installations.

 

Standards

ICEA S-76-474 Neutral-Supported Power Cable Assemblies with WeatherResistant Extruded Insulation rated 600 V

 

Specifications

Maximum operating voltage: • 600 volts Maximum conductor operation temperatures: Wet and dry locations

 

PE

• Normal: 75 °C
• Emergency: 95 °C
• Short Circuit: 150 °C

 

XLPE

• Normal: 90 °C
• Emergency: 130 °C
• Short Circuit: 250 °C

Engineering Information

1. Conductor: Aluminum alloy 1350-H19, solid conductor per ASTM B230, compressed Class B stranding, or Class A stranding or unilay-compressed per ASTM B231, or combination unilay (19 wires) per ASTM B786. Separator: A suitable opaque tape, as required.

2. Insulation: Black thermoset cross-linked polyethylene (XLPE) thermoplastic High Density polyethylene (HDPE).

3. Neutral: Bare aluminum alloy 1350-H19 classes A stranding per ASTM B231 or ACSR stranding per ASTM B232, or ACSR/AW per ASTM B549 or Aluminum Alloy 6201 conductors, per ASTM B399.

On request, cover neutral

 

Conductor Phase ID: Extruded ridges. Configurations (Assemblies):

Duplex: Consist of one black phase insulated conductor twisted around a bare neutral conductor.

Triplex: Consist of two black phase insulated conductor (Second conductor with 1 ridge) twisted around a bare neutral conductor.

Quadruplex: Consist of three black phase insulated conductor (Second conductor 1 ridge, third conductor 2 ridges) twisted around a bare neutral conductor

 

 

Covered line Wire ( Bare Overhead Conductor ), Duplex service drop -Aluminum Conductor, Triplex service drop -Aluminum Conductor, Quadruplex Service Drop -Aluminum Conductor

 

Other cross-sections can be offered upon request.

 

Quadruplex Service Drop -Aluminum Conductor

Applications

Used as overhead cable to supply 3-phase power, usually from a pole-mounted transformer, to the user's service head where connection to the service entrance cable is made. To be used at voltages of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75°C for polyethylene insulated conductors or 90°C for cross-linked polyethylene (XLPE) insulated conductors.

 

Triplex service drop -Aluminum Conductor

Applications

Used as overhead cable to supply power, usually from a pole-mounted transformer, to the user's service head where connection to the service entrance cable is made. To be used at voltages of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75°C for polyethylene insulated conductors or 90°C for cross-linked polyethylene (XLPE) insulated conductors.

 

Duplex Service Drop -Aluminum Conductor

Applications
Primarily used as overhead cable or air cable for 120 volt overhead service applications such as street lighting, outdoor lighting, and temporary service for construction. To be used at voltages of 600 volts phase-to-phase or less and at conductor temperatures not to exceed 75°C for polyethylene insulated conductors or 90°C for cross-linked polyethylene (XLPE) insulated conductors.