Combined Neutral and Earth (CNE) Airdac cable and SNE Airdac cable 600/1000V

Combined Neutral and Earth (CNE) Airdac  cable  and SNE Airdac cable 600/1000V

Ⅰ Applications

  The concentric cable is used as electric service entrance from the power distribution network until meter panel ,and as feeder cable from the meters panel until the panel or general distribution panel,just as it is specified in the National electric code,

This type of conductor can be used in dry and wet place,directly buried or outdoor;

It’s maximum temperature of operation is 70℃( PVC or PE insulation) or 90℃ (XLPE insulation) and it’s voltage of service for all the applications is 600V.

 

Ⅱ Specification

1. Conductor : Copper 

2.  Insulation: PVC or PE or XLPE

3.  Concentric neutral: Copper 

4.   Sheath: PVC or PE or XLPE

 

10mm², AIRDAC SNE Cable

 

Mechanical Properties 
* Cable size: 10mm² 
* Phase Conductor (No.xOD): 7×1.35mm 
* Nominal Insulation Thickness: 1.0mm 
* Neutral Conductor (No.xOD): 7×1.33mm 
* Earth Conductor (No.xOD): 3×1.78mm 
* Nominal Sheath Thickness: 1.6mm 
* Approximate Cable OD: 12.8mm 
* Approximate Cable Mass: 320 kg/km 

Installation Data (SAG* mm) 
Span 10m :45 
Span 20m :180 
Span 30m :400 
Span 40m :710 
Span 50m :1110 
Based on 
UTS** :3600 
MWT*** :900 

 

16mm², AIRDAC SNE Cable

Mechanical Properties 
* Cable size: 16mm² 
* Phase Conductor (No.xOD): 7×1.67mm 
* Nominal Insulation Thickness: 1.0mm 
* Neutral Conductor (No.xOD): 7×1.76mm 
* Earth Conductor (No.xOD): 3×2.20mm 
* Nominal Sheath Thickness: 1.6mm 
* Approximate Cable OD: 14.5mm 
* Approximate Cable Mass: 485 kg/km 

Installation Data (SAG* mm) 
Span 10m: 40 
Span 20m: 170 
Span 30m: 380 
Span 40m: 670 
Span 50m: 1050 
Based on 
UTS** :5760 
MWT*** :1440