Chinese Supplier Anti-theft cable with Neutral Conductor

Port:	any port in China
Payment Terms:	L/C,D/A,D/P,T/T,Western Union,MoneyGram
Supply Ability:	50000 Meter/Meters per Week
Place of Origin:	Henan China
Brand Name:	Sitong
Model Number:	concentric cable
Insulation Material:	PVC/PE/XLPE
Type:	aluminum/copper
Application:	power transmitter
Conductor Material:	aluminum or copper
Jacket:	PVC/PE/XLPE
Product name:	Chinese Supplier Anti-theft cable with Neutral Conductor
keywords:	anti-theft cable
oem:	support
Certificate:	iso/ccc
application:	power transmission
Voltage:	0.6/1KV AC 1.8KV DC
Conductor type:	overhead
Core:	Copper or alunium Core
keywords 2:	Electronic Anti-theft cable
keywords 3:	connection cable
Packaging Detail:	standard packing as customized and China standard. usually use wooden drum.

Product Description

Chinese Supplier Anti-theft cable with Neutral Conductor

Conductor:

The materials used in the manufacture of concentric copper conductors shall consist of soft copper wires class B and the composition of a pure copper will never lower than 99.85 and the concentric aluminum conductors formed by wires keychain aluminum alloy 8000 series (AA-8000).

Copper wires and aluminum shall comply with the provisions of ASTM B 3 standard and UL 854.

For bipolar concentric conductor, standard sections are # 8 and 10 AWG.

For tripolar concentric conductor, standard sections are # 8, 6, 4 y 2 AWG.

In the phase conductors with 7 wires, will be able to perform welding copper wires during wiring. Once this process is completed it will not be allowed two welds closer than 15m (50ft)

According to paragraph 6 of ASTM B 8, the wiring process will be as follows:

Over the central conductor will be braided the rest of the layers. Braiding step will be at a distance to vary between 8 and 16 times the outside diameter. The lay direction of the copper wires in the outer layer will be right.

Isolation:

Each phase conductor will contain an insulating layer of XLPE for a temperature of 90 C. in the bipolar cables, over the insulating layer will be the braided neutral conductor helically with a passage between 8 and 16 times the outer diameter. In the tripolar cables over the isolation of each phase will have a PVC insulation filling in the joint of both cables and over this will be placed the neutral conductor.

Will be put over the concentric neutral conductor a tape and over this outer layer of XPLE. Must ensure the tightness of the set plus adequate resistance to ultraviolet rays (UV).

This last layer besides adding firmness should be smooth in appearance and will not be observed depressions caused by unfilled spaces beneath this layer.

Should not produce bubbles, cuts, tears or the presence of foreign materials that are detectable to the naked eye. Besides the envelope will be well centered.

The disposition of the tape around the bare conductor shall be performed as follows:

A single layer of tape with a convenient width helically applied without wrinkles or folds and with an overlap of at least 6mm. The tape will consist of nylon, with a thickness of at least 0.09mm.

Conductor Size		Code Words	Approximate Aluminum 1350 Size Having Equivalent Resistance			Size and Stranding of ACSR with Equal Diameter				Required Construction				Mass		Rated Strength
cmil	mm 2		Size			cmil	AWG	mm2	Strand- ing	Number of Wires	Diameter of Wires		Class	Per 1000 ft, lb	Per km, kg	kips	kN
			cmil	AWG	mm 2						in.	mm
1439 200	729.2		1 272 000		644.5	1272 000		644.5	54/7	61	0.1536	3.90	AA	1342	1997	46.8	208
1348 800	683.4		1 192 500		604.2	1192 500		604.2	54/7	61	0.1487	3.78	AA	1258	1872	43.9	195
1259 600	638.2		1 113 000		564.0	1113 000		564.0	54/7	61	0.1437	3.65	AA	1175	1748	41.0	182