China factory price 0.6/1kv 4 cores electrical cable and wire

 0.6/1kv 4 cores electrical cable and wire  

 

 

PVC/XLPE power cable is used to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

 

Standard

The products can be produced according to our factory specification which is equivalent to the standard IEC60502, GB/T 12706. The factory can also design and manufacture special power cable according to the other standards required by the customers.

 

 

Power cable Structure

The basic structure of power cables by the core (conductor), an insulating layer, a shielding layer and a protective layer of four parts.

1. The core is conductive part of power cable, which is used to transfer power, is the main part of the power cable.

2. Insulation is the line between the core and the earth and the different phase of wire core in the electrical insulated from each other, is an indispensable part in the structure of power cable.

3. Shield  10KV power cable shielding layer and more generally have a conductor shielding layer and an insulating shielding layer.

4. Protective layer  The role of the protective layer is to protect the power cable from the outside world the invasion of the impurities and moisture, and prevent the external force directly damage the power cable.

 

 

 

 

Nominal Cross-sectional Areas

1.5 mm2, 2.5 mm2, 4 mm2, 6 mm2, 10 mm2, 16 mm2, 25 mm2, 35 mm2, 50 mm2, 70 mm2, 95 mm2, 120 mm2, 150 mm2, 185 mm2, 240 mm2, 300 mm2, 400 mm2, 500 mm2, 630 mm2, 800 mm2

 

 

 

 

Production range

Single core cable: from 1.5 mm2 to 800 mm2,

Multi-core cable: from 1.5 mm2 to 400 mm2

 

 

 

Operating characteristics:

Rated power-frequency voltage u0/u:0.6/1 KV

Max permissible continuous operating temperature of conductor 70

Max short-circuit temperature of the conductor shall not exceed (Max 5 seconds duration): cross-section of conductor  300 mm²

The anbient temperature under installations should not be below 0

The bending radius of single core cable should not be less than 20 times of the cable diameter ,the bending radius of multi-core cable should not be less than 15 times of the cable diameter

 

 

 

Spectfication:

 

 

 

 

Company Information

Sonorous Cable Co., Ltd.  

 

Registered capital of RMB: 201,800,000

 

Total assets : 28.7millions  

 

Factory Area: 45425  mm2  

 

Manufacturing Capacity per year: 250000km  

 

Number of Employees: 460  

 

 

 

 

 

If you're interested in our 4 cores electrical cable, pls feel free to contact me !!!