BS215 ACSR Horse/Beaver Cable 70mm2 acsr bare conductor

BS215 ACSR Horse/Beaver Cable 70mm2 acsr bare conductor
Port: Qingdao
Payment Terms: L/C,D/P,T/T
Supply Ability: 10000 Kiloampere/Kiloamperes per Month
Place of Origin: Henan China
Brand Name: Jinshui
Model Number: BS215 ACSR
Insulation Material: Bare
Type: Low Voltage
Application: Construction
Conductor Material: Aluminum
Jacket: Bare
Manufacturing Standard: IEC,GB/T,BS,ACSM,DIN
Packing: Wooden Drum
Material: Aluminum . Aluminum Alloy, steel
Certificate: ISO9001/ISO14001 /OHSAS18001/CCC/CE
Cross section: 15-1500mm2
Conductor Type: Bare Stranded
Product name: BS215 ACSR Horse/Beaver Cable 70mm2 acsr bare conductor
Packaging Detail: wooden drum, iron-wooden drum for aluminum stranded conductor

BS215 ACSR Horse/Beaver Cable 70mm2 acsr bare conductor  

 

Product Description

 

1.Application

The conductors are suitable for use in all practical spans on wood poles, transmission towers,and other structures.

Application range from extra high voltage(EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises.

AAC(All Aluminum Conductor) has a long service record because of its economy ,dependability, and strength to weight ratio.

The combined light weight and high conductivity of aluminum with strength of the steel cores enable higher tensions ,less sag,and longer spans than any alternative.

2. ALL ALUMINIUM CONDUCTORS (AAC)

Applications

Used as bare overhead conductor for distribution lines. Because of its poor strength to weight ratio,

AAC has limited use in Transmission lines. AAC is extinsively used in urban areas where spans are usually short but high conductivity is required.

 

Specifications

AAC bare conductor can be supplied to meet various International Specifications like ASTM, BS, CSA, DIN, IEC. etc.

 

Construction

EC Grade hard drawn alumium wires concentrically stranded.

 

AAC aluminum stranded conductor Technical Characteristics Based on Standard DIN 48201 / DIN EN50182

Code number Area Number of wires Wire diameter Conductor diameter Linear mass Rated strength D.C. resistance at 20oC
mm2 No. mm mm kg/km kN Ω/km
16 15.9 7 1.7 5.1 43.4 3.02 1.7986
25 24.2 7 2.1 6.3 66.3 4.36 1.1787
35 34.4 7 2.5 7.5 93.9 6.01 0.8317
50 49.5 7 3 9 135.2 8.41 0.5776
50 48.3 19 1.8 9 132.9 8.94 0.5944
70 65.8 19 2.1 10.5 180.9 11.85 0.4367
95 93.3 19 2.5 12.5 256.3 16.32 0.3081
120 117 19 2.8 14 321.5 19.89 0.2456
150 147.1 37 2.25 15.8 405.7 26.48 0.196
185 181.6 37 2.5 17.5 500.9 31.78 0.1588
240 242.5 61 2.25 20.3 671.1 43.66 0.1193
300 299.4 61 2.5 22.5 828.5 52.4 0.0966

 

3. ALL ALUMINIUM ALLOY CONDUCTORS (AAAC)

 

Applications

Used as bare overhead conductor for power distribution lines. Designed utilizing a high-strength aluminium alloy

to achieve a high strength -to-weight ratio; affords better sag characteristics. Aluminium alloy gives AAAC higher resistance to corrosion than ACSR.

Specifications

 

 AAAC bare conductor can be supplied to meet various International Specifications like ASTM, BS, CSA, DIN, IEC. etc.

 

Construction

Aluminium alloy 6201 wires, concentrically stranded from 7 strands to 61 strands depending upon the size.

AAAC aluminum stranded conductor Technical Characteristics Based on Standard BS 3242

 

4. ALUMINIUM CONDUCTOR STEEL RE-INFORCED (ACSR)

 

 Specifications

ACSR bare conductor can be supplied to meet vars International specifications like ASTM, BS, CSA, DIN, IEC. etc.

Construction

EC Grade Aluminium wires concentrically stranded over a steel core. The steel core wire is zinc coated.

Various grades of coating is available. The steel core can also be 'aluminized' to produce ACSR/AZ or Aluminium clad' to produce ACSR/AW.

ACSR aluminum stranded conductor Technical Characteristics Based on Standard BS 215-2

Code name Nominal aluminium area Stranding and wire diameter Sectional area of aluminium Total sectional area Approx. overall diameter Approx. mass Calculated D.C. resistance at 20oC Calculated breaking load
Al Steel
mm2 No./mm mm2 mm2 mm kg/km Ω/km kN
RABBIT 50 6/3.35 1/3.35 52.88 61.7 10.05 214 0.5426 18.35
DOG 100 6/4.72 7/1.57 105 118.5 14.15 394 0.2733 32.7
WOLF 150 30/2.59 7/2.59 158.1 194.9 18.13 726 0.1828 69.2
DINGO 150 18/3.35 1/3.35 158.7 167.5 16.75 506 0.1815 35.7
LYNX 175 30/2.79 7/2.79 183.4 226.2 19.53 842 0.1576 79.8
ZEBRA 400 54/3.18 7/3.18 428.9 484.5 28.62 1621 0.0674 131.9

 

Packaging & Shipping

  wooden drum, iron-wooden drum for aluminum stranded conductor

 

Related Product

Application

Overhead bare conductor has been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist.

Company Information

Jinshui Wire & Cable Group

is located in the national class Zhengzhou high and new technology industries zone in Zhengzhou ,Henan province. We have owned a number of exclusive essential manufacture technologies and has pass ISO 9001 Quality Management System ,ISO 14001 Environmental Management System ,OHSAS18001 occupational Heath Management System ,ISO 10012 Measurement Management System and others from China and abroad.

We have been engaged in producing electric cable and wire for nearly 20 years, and  we are also 12 year gold supplier in alibaba. And we are confident that we can offer the best service and quality for you.

 

Exhibition

FAQ

1. Are  you the factory or trading company?
We are the manufacturer and 13 years gold supplier on alibaba.We are engaged in exporting cables for nearly 15 years.

2. When can I get the price?
We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Sample is free, but the freightcharge should be paid.

4. What is the payment terms?
30% deposit by T/T,70% T/T after checking the copy of B/L. Or irrevocable L/C at sight .

5. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.

Contact Us

Tags: , ,

Contact us

 

 

 

Search