BS 215 Bare Conductor 500mm2 ACSR moose conductor

BS 215 Bare Conductor 500mm2 ACSR moose conductor

 

 

 

 

(2).Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area,the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.

(3).When connecting conductors,the conductor beside the connecting tube cant be prominent.Otherwise,the force on the operating conductors will be unbalanced.After connectors are install,the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.

(4).Under installaion,the arc downing stress of all the conductors should be the same.With in the permissible distance of crossing buildings or dropping to the ground,the stress can be 10-15% higher than regular stress.

 

 

 

(1).The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T 17048-1997(equivalent to IEC 60889:1987).

(2).The zinc coated steel wire used for ACSR conforms to IEC 60888:1987.

(3).Production can be arranged according to customers requirements for material standard,etc.

Construction of All Aluminum Conductor and Aluminum Conductor Steel Reinforced

The Details of Products

 

Fine manufacturing technique produce the high quality of wire and wire and cable.

 

The Headoffice

Clear and peaceful working office represent the our hunmanized management.

 

 

 

 

The Factory

Perfect equipments and mature process technology can guarantee the fine products.

 

The International Fair

We have a united team to attend international fair to sell our products.