Bare Aluminum Stranded aaac 1000mm2 cable /All Aluminum Alloy 6201-T81 Stranded Overhead conductor made in China

Port:	Qingdao
Payment Terms:	L/C,D/P,T/T
Supply Ability:	10000 Kiloampere/Kiloamperes per Month
Place of Origin:	Henan China
Brand Name:	Jinshui
Model Number:	Bare Aluminum Stranded
Insulation Material:	Bare
Type:	Low Voltage
Application:	Construction
Conductor Material:	Aluminum
Jacket:	Bare
Manufacturing Standard:	IEC,GB/T,BS,ACSM,DIN
Packing:	Wooden Drum
Material:	Aluminum . Aluminum Alloy, steel
Certificate:	ISO9001/ISO14001 /OHSAS18001/CCC/CE
Cross section:	15-1500mm2
Conductor Type:	Bare Stranded
Product name:	Bare Aluminum Stranded aaac 1000mm2 cable
Core:	aaac 1000mm2 cable
Packaging Detail:	wooden drum, iron-wooden drum for aluminum stranded conductor

Bare Aluminum Stranded aaac 1000mm2 cable

Product Description

1.Application

The conductors are suitable for use in all practical spans on wood poles, transmission towers,and other structures.

Application range from extra high voltage(EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises.

AAC(All Aluminum Conductor) has a long service record because of its economy ,dependability, and strength to weight ratio.

The combined light weight and high conductivity of aluminum with strength of the steel cores enable higher tensions ,less sag,and longer spans than any alternative.

2. ALL ALUMINIUM CONDUCTORS (AAC)

Applications

Used as bare overhead conductor for distribution lines. Because of its poor strength to weight ratio,

AAC has limited use in Transmission lines. AAC is extinsively used in urban areas where spans are usually short but high conductivity is required.

Specifications

AAC bare conductor can be supplied to meet various International Specifications like ASTM, BS, CSA, DIN, IEC. etc.

Construction

EC Grade hard drawn alumium wires concentrically stranded.

AAC aluminum stranded conductor Technical Characteristics Based on Standard DIN 48201 / DIN EN50182

Code number	Area	Number of wires	Wire diameter	Conductor diameter	Linear mass	Rated strength	D.C. resistance at 20^oC
Code number	mm²	No.	mm	mm	kg/km	kN	Ω/km
16	15.9	7	1.7	5.1	43.4	3.02	1.7986
25	24.2	7	2.1	6.3	66.3	4.36	1.1787
35	34.4	7	2.5	7.5	93.9	6.01	0.8317
50	49.5	7	3	9	135.2	8.41	0.5776
50	48.3	19	1.8	9	132.9	8.94	0.5944
70	65.8	19	2.1	10.5	180.9	11.85	0.4367
95	93.3	19	2.5	12.5	256.3	16.32	0.3081
120	117	19	2.8	14	321.5	19.89	0.2456
150	147.1	37	2.25	15.8	405.7	26.48	0.196
185	181.6	37	2.5	17.5	500.9	31.78	0.1588
240	242.5	61	2.25	20.3	671.1	43.66	0.1193
300	299.4	61	2.5	22.5	828.5	52.4	0.0966

3. ALL ALUMINIUM ALLOY CONDUCTORS (AAAC)

Applications

Used as bare overhead conductor for power distribution lines. Designed utilizing a high-strength aluminium alloy

to achieve a high strength -to-weight ratio; affords better sag characteristics. Aluminium alloy gives AAAC higher resistance to corrosion than ACSR.

Specifications

AAAC bare conductor can be supplied to meet various International Specifications like ASTM, BS, CSA, DIN, IEC. etc.

Construction

Aluminium alloy 6201 wires, concentrically stranded from 7 strands to 61 strands depending upon the size.

AAAC aluminum stranded conductor Technical Characteristics Based on Standard BS 3242

Code name	Nominal aluminium area	Stranding and wire diameter	Sectional area	Approx. overall diameter	Approx. mass	Calculated D.C. resistance at 20^oC	Calculated breaking load
Code name	mm²	No./mm	mm²	mm	kg/km	Ω/km	kN
ALMOND	25	7/2.34	30.1	7.02	82	1.094	8.44
CEDAR	30	7/2.54	35.47	7.62	97	0.9281	9.94
FIR	40	7/2.95	47.84	8.85	131	0.688	13.4
HAZEL	50	7/3.30	59.87	9.9	164	0.5498	16.8
OAK	100	7/4.65	118.9	13.95	325	0.2769	33.3
ASH	150	19/3.48	180.7	17.4	497	0.183	50.65
ELM	175	19/3.76	211	18.8	580	0.1568	59.1
UPAS	300	37/3.53	362.1	24.71	997	0.09155	101.5

4. ALUMINIUM CONDUCTOR STEEL RE-INFORCED (ACSR)

Applications

ACSR has the established reputation for economy and dependibility in power transmission lines.

Also used for primary and secondary distribution lines.

Wide range of steel content from 7% to 40% can be achieved by different strandings, to meet desired strength.

Specifications

ACSR bare conductor can be supplied to meet vars International specifications like ASTM, BS, CSA, DIN, IEC. etc.

Construction

EC Grade Aluminium wires concentrically stranded over a steel core. The steel core wire is zinc coated.

Various grades of coating is available. The steel core can also be 'aluminized' to produce ACSR/AZ or Aluminium clad' to produce ACSR/AW.

ACSR aluminum stranded conductor Technical Characteristics Based on Standard BS 215-2

Code name	Nominal aluminium area	Stranding and wire diameter		Sectional area of aluminium	Total sectional area	Approx. overall diameter	Approx. mass	Calculated D.C. resistance at 20^oC	Calculated breaking load
	Nominal aluminium area	Al	Steel	Sectional area of aluminium	Total sectional area	Approx. overall diameter	Approx. mass	Calculated D.C. resistance at 20^oC	Calculated breaking load
	mm²	No./mm		mm²	mm²	mm	kg/km	Ω/km	kN
RABBIT	50	6/3.35	1/3.35	52.88	61.7	10.05	214	0.5426	18.35
DOG	100	6/4.72	7/1.57	105	118.5	14.15	394	0.2733	32.7
WOLF	150	30/2.59	7/2.59	158.1	194.9	18.13	726	0.1828	69.2
DINGO	150	18/3.35	1/3.35	158.7	167.5	16.75	506	0.1815	35.7
LYNX	175	30/2.79	7/2.79	183.4	226.2	19.53	842	0.1576	79.8
ZEBRA	400	54/3.18	7/3.18	428.9	484.5	28.62	1621	0.0674	131.9