Aluminum conductor steel reinforced ACSR weasel acsr conductor price list
| Port: | Qingdao |
| Payment Terms: | L/C,D/A,D/P,T/T,Western Union |
| Supply Ability: | 3000 Kilometer/Kilometers per Month |
| Place of Origin: | Henan China |
| Brand Name: | SANHE |
| Model Number: | Weasel |
| Insulation Material: | none |
| Type: | High Voltage |
| Application: | Overhead |
| Conductor Material: | Aluminum |
| Jacket: | none |
| Delivery Detail: | Depend on your quantity |
| Packaging Detail: | standard woodendrum |
ACSR Weasel (aluminum steel reinforced conductor) ,BS 215
1.Used as bare overhead transmission conductor and as primary and secondary distribution conductor and messenger support. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity.
2. Service Performance
(1).The permissible long-time operating temperature for aerial conductor is 70oC.
(2).Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area,the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3).When connecting conductors,the conductor beside the connecting tube cant be prominent.Otherwise,the force on the operating conductors will be unbalanced.After connectors are install,the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4).Under installaion,the arc downing stress of all the conductors should be the same.With in the permissible distance of crossing buildings or dropping to the ground,the stress can be 10-15% higher than regular stress.
3.Product Performance
(1).The electrical performance of AAC and ACSR is indicated in DCΩ/km(20oC).The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ. m of international standard value.
(2).The rated tensile strength of AAC is denoted with the result of total cross-section of all aluminum conductors multiplied by min.tensile of corresponding size specified in the standard for aluminum wire.
(3).The rated tensile strengh of ACSR is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.
a.The tensile strength of all aluminum conductors is denoted with the result of all cross-sections of aluminum conductors multiplied by min.tensile strength of corresponding size specified in the standard for aluminum wire.
b.The tensile strength of all steel wire is denoted with the result of all cross-sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.
4.Material Standard
(1).The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T 17048-1997(equivalent to IEC 60889:1987).
(2).The zinc coated steel wire used for ACSR conforms to IEC 60888:1987.
(3).Production can be arranged according to customers requirements for material standard,etc.
Construction of All Aluminum Conductor and Aluminum Conductor Steel Reinforced
We can supply this conductor according to different recognized standards, such as IEC61089, BS215, ASTM B232, CSA C49, DIN48204, JIS C3110, customer special specification also can be satisfied.
The data sheets below show the most common standards, British standard.
British Sizes BS EN 50182:2001AA
1. Standard seaworthy drum (wooded rum,wooded steel drum, steel drum)
2. Drum size can be customized or Meeting container the Max.load size
3. Drum overall diameter can be from 1 meter to 2.2 meters
4. Under customer requirement with certain length packed in rolls wraped in plastic tape or Nylon plastc tape.
Company information
Zhengzhou Sanhe Cable Co.,Ltd. It was founded in 2008,We have our own factory.
We main product including:Aerial Bundle Cable (ABC Cable), Aluminum Conductor Steel Reinforced (ACSR), All Aluminum Conductor (AAC), All Aluminum Alloy Conductor (AAAC), Concentric cable , PVC insualted wire , Galvanized steel wire(stay wire),Power cable and so on.
Quality inspection
1, There is a professional design engineer team, before manufacturing, all of the product drawing will be approved by CSBTS (State Bureau of Quality Technical Supervision), and then the cable could be produced only if qualified.
2, To ensure the raw materials quality, all the copper are special-used for cable with the Inspection Certificates. The raw material is inspected when entering factory, and only the qualified material could be put in storage and used for production.
3, To ensure the product quality, there is a professional high level quality laboratory, most of the key technology date will be checked by high precision instrument.
FAQ
1. Q: Are you the manufacturer or the trading company?
A: We are the manufacturer.
2. Q: What is your payment terms?
A: 30% T / T in advance, then 70% T / T or L / C balance before shipment. Or 100% L / C at sight.
3. Q: What's your MOQ?
A: It's base on the cable or wire type.Mabye 3-5km.
4. Q: How long is your delivery date?
A: It's general within 15 days after your prepayment,It according to quantity.
5.Q: How is the quality of your product guaranteed?
A: Quality is our priority, we treat quality control as the first most important thing from the beginning to the end. In design, material, acquisition of materials, manufacture of semi-finished products, inspection of finished products, such as strick control to guarantee the quality of the product.
6. Q: Do you have any certificate?
A: We have CE, ISO 9001, UL, KEMA, SABS, TUV, DIN test report and type for acsr, AAC, XLPE insulated Power cable.
7.Q: What standards for your products?
A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, Sans, CSA or as customers' requirement.
- Next: 5 Cores Aluminum Wire Aerial Bundle Cable 1000V ABC Conductor
- Previous: ACSR aluminium HARE conductor
Contact us
Search
You May Like
- No related articles
