ACSR 400/50 ACSR conductor 400sqmm Bear Conductor AC cable

1. Applications of Bare Conductor  

 

AAC AACSR and ACSR Conductor have been widely used in power transmission lines with various voltage levels, because they have such good characteristics as simple structure, convenient installation and maintenance ,low cost and large transmission capacity. They are also suitable for laying across rivers, valleys and the places where special geographical features exist.

 

2. Service Performance

(1).The permissible long-time operating temperature for aerial conductor is 70^oC.

(2).Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.

(3).When connecting conductors ,the conductor beside the connecting tube cant be prominent.Otherwise,the force on the operating conductors will be unbalanced.After connectors are install,the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.

(4).Under installation, the arc downing stress of all the conductors should be the same. With in the permissible distance of crossing buildings or dropping to the ground, the stress can be 10-15% higher than regular stress.

 

3.Product Performance

(1).The electrical performance of AAC Conductor and ACSR Conductor is indicated in DCΩ/km(20^oC).The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ. m of international standard value.

(2).The rated tensile strength of AAC Conductor is denoted with the result of total cross-section of all aluminum conductors multiplied by min. tensile of corresponding size specified in the standard for aluminum wire.

(3).The rated tensile strengh of ACSR Conductor is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.

a.The tensile strength of all aluminum conductors is denoted with the result of all cross-sections of aluminum conductors multiplied by min.tensile strength of corresponding size specified in the standard for aluminum wire.

b.The tensile strength of all steel wire is denoted with the result of all cross-sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.

 

4. Products range

1)AAAC(All Aluminum Alloy Conductors)

2)ACSR Conductor(Aluminum Conductor Steel Reinforced)

3)AAC Conductor(All Aluminum Conductors)

4)AACSR(Aluminum Alloy Conductors Steel Reinforced)

5)ACSR/AW(Aluminum Conductor Aluminum Clad Steel Reinforced)

    

6.Material Standard

(1).The hard aluminum conductor used for AAC Conductor and ACSR Conductor conforms to the standard GB/T 17048-1997(equivalent to IEC 60889:1987).

(2).The zinc coated steel wire used for ACSR Conductor conforms to IEC 60888:1987.

(3).Production can be arranged according to customers requirements for material standard,etc.

 

7.Specifications for Bare Conductor 

 

Get more information connect with 

Tina

Mobile: +86 157 3715 6317 (WhatsApp / Wechat)