new concentric cable all aluminum cable and neutral cable
Ⅰ Applications
The concentric cable is used as electric service entrance from the power distribution network until meter panel ,and as feeder cable from the meters panel until the panel or general distribution panel,just as it is specified in the National electric code,
Ⅱ Specification
1. Conductor : Copper or Aluminum or 8000 series Aluminum Alloy
2. Insulation: PVC or PE or XLPE
3. Concentric neutral: Copper or Aluminum or 8000 series Aluminum Alloy
4. Sheath: PVC or PE or XLPE
Specification of all aluminum cable
| 2×#6 | 3×#6 | 2×#4 | 3×#4 | 4×#4 | 3×#2 | 4×#2 | ||
| Fase | No hilos | 7 | ||||||
|
Diametro hilo (mm) |
1.55 | 1.96 | 2.47 | |||||
|
Diametro fase (mm) |
4.66 | 5.88 | 7.42 | |||||
|
Seccion fase (mm2) |
13.3 | 21.2 | 33.6 | |||||
| Espesor aislamiento (mm) |
1.14 |
|||||||
|
Diametro sobre aislamiento (mm) |
6.94 | 8.16 | 9.70 | |||||
|
Neutro |
Cobertura (%) | ≥90 | ||||||
| No hilos | 25 | 65 | 26 | 65 | 103 | 65 | 103 | |
|
Diametro hilo (mm) |
0.81 | 0.51 | 1.02 | 0.64 | 0.51 | 0.81 | 0.64 | |
| AWG | 20 | 24 | 18 | 22 | 24 | 20 | 22 | |
|
Seccion (mm2) |
12.97 | 13.33 | 21.3 | 21.11 | 21.12 | 33.7 | 33.44 | |
| Espesor cubierta (mm) | 1.14 | 1.52 | 1.14 | 2.03 | 1.52 | 2.03 | 2.03 | |
|
Diametro exterior aproximado (mm) |
11.14 | 11.2×18.2 | 12.7 | 13.8×21.9 | 22 | 15.6×25.3 | 26 | |
ZhengZhou Sanhe Cable Co.,Ltd. was founded in 2008, we have our own manufacturing firm as well. We have been producing cables and wires for many years and 10 years degisning and making experience offer us this very strength in the cable industry.
1. What kinds of products does SANHE CABLE manufacture?
1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on;
2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on;
3)PVC Insulated (Flexible ) Wire ;
4) PVC Insulated and Sheathed (Armoured) Power Cable;
5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;
6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on.
2.Which markets do you involve mainly in?
Our products have been exported mainly to Australia, Russia, Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Austrapa, etc.
3. Which standards do you comply with when you produce the electrical wires and cables ?
We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer provided.
4. What is the min.order quantity ?
It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted .But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow,we will try our best to solve the problem and meet with the requirement If you have special request.
5. What is the production capacity per week or per month ?
For the bare conductor, we can finish 3000 tons within one month. For power cables, that depends on the type and size. The total output value per month is approx. USD3,000,000.00 for insulated aluminum cables and that is approx. USD8,000,000.00 for insulated copper cables.
OUR PRODUCT LINE:
