Low Voltage Cable 3Cx50mm2 Power Cable Cu/XLPE/SWA/PVC, 0.6/1 kV

Low Voltage Cable 3Cx50mm2 Power Cable Cu/XLPE/SWA/PVC, 0.6/1 kV
Port: TIANJIN
Payment Terms: L/C,T/T
Supply Ability: 5000 Kilometer/Kilometers per Year
Place of Origin: Hebei China
Brand Name: HAOHUA
Model Number: 50mm2 Power Cable
Insulation Material: PVC
Type: Low Voltage
Application: Industrial
Conductor Material: COPPER OR ALUMINIUM
Jacket: XLPE
Type: Cu/XLPE/PVC/SWA/PVC, Cu or Al/XLPE/LSZH, Cu or Al/XLPE/LSZH/SWA/LSZH
Voltage: 0.6/1kV
Cores: 1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E
Range of Nominal cross section: 1 .5 mm2 ~ 630 mm2
Application: electrical power transmission and distribution lines
Standard: IEC 60502, BS 7870,
Conductor: Class 1/2 annealed bare copper solid or strands
Armour: Steel Wire Armour or Steel Tape Armour
Sheath: PVC, PE or LSZH
Remark: of flame retardant, fire resistance, environment friendly or other
Delivery Detail: within 15days
Packaging Detail: TIMER DRUM OR AS YOUR REQUEST

50mm2 Power Cable   3Cx50mm2 Power Cable Low Voltage Cable   Cu/XLPE/SWA/PVC

 

 

 

Product Description

 

 

Reference Standards: IEC60502-1, IEC 60228, IEC60332 -1/2/3, BS6346, BS5467, BS6360, BS6724, VDE0276, AS/NZS 5000.1, etc.
Rated Voltage: 600/1000V (0.6/1kV)
Core Number: Single Core, Two Core, Three Core, Four Core, Five Core (1C, 2C, 3C, 4C, 5C)
Available Dimensions: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.
Codes Available: NYY, NAYY, N2XY, NA2XY, NYCY, NYCWY, NYBY, NAYBY, NYRY, NAYRY, N2XRY, N2XBY, NA2XBY, NA2XRY, N2XH, NA2XH,NHMH, NHXMH,
VV, VLV,YJV, YJLV, VV22, VLV22, YJV22, YJLV22, VV32, VLV32, YJV32, YJLV32, VV72, VLV72, YJV72,YJLV72
Application:

3Cx50mm2 Power Cable To be laid indoors, in tunnel, cable furrow or pipe, underground. Steel tape armored cable could bear certain mechanical force, but 3Cx50mm2 Power Cable  can't bear great pulling force. Steel wire armored cable is applicable to the well, water inside and fall in the bad soil, it can bear great pulling strength and mechanical forces.

3Cx50mm2 Power Cable   is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of 3Cx50mm2 Power Cable will not be affected during installation.

 

3Cx50mm2 Power Cable  is suitable for use in power transmission and distribution lines with rated power frequency voltage 600/1000V.For laying indoors, in tunnel, cable trench, well or direct in ground. 

Construction:  
Conductor: Stranded round compacted copper or aluminum conductor (Cu / Al ), copper wire annealed.
Insulation: XLPE (Cross-Linked Polyethylene) or PVC (Polyvinyl Chloride) for 3Cx50mm2 Power Cable 
Core Identification: 1 Core: Brown 
2 Cores: Brown, Blue 
3 Cores: Brown, Black, Grey 
4 Cores: Blue, Brown, Black, Grey 
5 Cores: Green/Yellow, Blue, Brown, Black, Grey 
Alternative core identification: White Cores with Black numbers
Filler: Polypropylene filament with lapped binding tape
Separator: Binding tape
Bedding: PVC (Polyvinyl Chloride) or LSZH.
Armouring: Single Core: Aluminium Wire Armoured (AWA) 
Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA)
Sheath: PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR
Colour: Black
Temperature Rating: 0°C to 90°C (XLPE), 0°C to 70°C (PVC) 
During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250°C (160°C for PVC)
Environment temperature should be no lower than 0°C for laying the cable.
Minimum Bending Radius: Single Core Cable: Non Armored Cable 20D, Armored Cable 15D
Cores Cable: Non Armored Cable 15D, Armored Cable 12D.
Remarks: D means practical external diameter of the cable

  

 

 

Tags: , ,

Contact us

 

 

 

Search