0.6/1kV XLPE PVC Insulated 120 150 185 240 300 sq mm2 single core electrical cables sizes
Brief Introduction for single core cable
0.6/1kV XLPE PVC insualted single core cable is applicable for power transmission through the power line of rated voltage 1kV and below, and it is proper to lay these cables in the fixed places, such as hotels, stations, chemical engineering and oil platforms, mines, power plants, metros, and high buildings, etc.
Characteristics for single core cable :
1)Rated voltage U0/U : 0.6/1kV
2)Maximum conductor temperature is 90°C
3)Short circuit temperature (lasting for less than 5s):less than 250 °C
4)Ambient installation temperature shall be not lower than 0°C; minimum bending radius: for single-core cable,20(D+d)(mm), for multi-core cable, 15(D+d)(mm)(D=cable outside diameter, d= nominal diameter of main conductor).
5) Cable can be laid aerially, in trough, or underground
Producr range of single core cable
|
Type |
Cu/XLPE/SWA/PVC, Al/XLPE/SWA/PVC |
|
|
Voltage |
0.6/1 kV |
|
|
Cores |
1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E |
|
|
Range of Nominal cross section |
1.5 mm2 – 630 mm2 |
|
|
Application |
XLPE insulated electrical cable applies to electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1 kV. For laying indoors, in tunnel, cable trench, well or direct in ground, able to bear external mechanical forces, and certain force |
|
|
Standard |
IEC 60502, BS 7870, GB/T12706 |
|
Picture of single core cable
Wendy Jiang- Sale engineer
TEL: 0086-531-88814697
FAX: 0086-531-88876156
MOB: 0086-18253153062
SKYPE:hongliangcablesales3
EMAIL: wendy(at)hldlcable.com
Send Your Inquiry Details in the Below for Free Sample, Click "Send" now!
