CU/XLPE/PVC low voltage power cable 16mm2
Structure of Low Voltage Power Cable
Conductor: Solid or stranded copper
Insulation: Cross-linked polyethylene (XLPE)
Filler: PP Filler
Binder: Binding tape
Inner sheath: Polyvinyl chloride (PVC)
Amour: Galvanized steel wire armored(SWA)
Sheath: Polyvinyl chloride (PVC)
The standard of low volatge power cable
Our low voltage power cable is produced in accordance with IEC 60502, BS 6622, GB/T12706 standards. The low voltage power cable's flame retardant property can be classified as class A,B,C,D which is stipulated in GB/T18380, Furthermore, its optic-penetrated rate shall be not less than 60 percent, according to GB/T17651.2 provisions.
Requirements specified in “GB/ T17650.2” shall be followed to test the PH value and conductivity of gases produced when the cable is burned;
For environmental cables, the PH value shall not be less than 4.3 and the conductivity shall not be more than 10us/mm.
Specification for low voltage power cable
|
Type |
Description |
Cores |
Conductors range |
|
YJV |
CU/XLPE/PVC low voltage power cable |
1, 2, 3, 4, 3+1, 5, 4+1, 3+2 |
1.5~800mm2 |
|
YJY |
CU/XLPE/PE low voltage power cable |
1, 2, 3, 4, 3+1, 5, 4+1, 3+2 |
1.5~800mm2 |
|
ZA-YJV ZB-YJV ZC-YJV |
Copper conductor, XLPE insulation flame-retardant CU/XLPE/PVC low voltage power cable |
1, 2, 3, 4, 3+1, 5, 4+1, 3+2 |
1.5~800mm2 |
|
WDZA-YJY WDZB-YJY WDZC-YJY |
Copper conductor, XLPE insulation Low Smoke Halogen Free or Zero Halogen (LSHF or LSZH) flame-retardant low voltage power Cable |
1, 2, 3, 4, 3+1, 5, 4+1, 3+2 |
1.5~800mm2 |
|
NH-YJV |
Copper conductor, XLPE insulation fire-resistant power Cable |
1, 2, 3, 4, 3+1, 5, 4+1, 3+2 |
1.5~800mm2 |
|
Type |
YJV32, YJLV32, Cu/XLPE/STA/PVC, Al/ XLPE /STA/PVC |
|
|
Voltage |
0.6/1 kV(Low voltage power cable) |
|
|
Cores |
1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E |
|
|
Range of Nominal cross section |
1.5 mm2 – 630 mm2 |
|
|
Application |
Low voltage power cable applies to electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1 kV. For laying indoors, in tunnel, cable trench, well or direct in ground, able to bear external mechanical forces, and certain force |
|
|
Standard |
IEC 60502, BS 7870, GB/T12706 |
|
|
Constructions |
Conductor: |
Class 1/2 annealed bare copper solid or strands |
|
Insulation: |
XLPE |
|
|
Armour: |
SWA (Remark: for single core the armour should be AWA or SSWA) |
|
|
Sheath: |
PVC, PE or LSZH |
|
Low voltage power cable
Packing : Low voltage power cable should be supplied in steel drum. Power cable piece length should be of 500meter length or as specified by the customer at the time of order.
Shipping : 20 working days or as to the buyers' request for low voltage power cable
Wendy Jiang- Sale engineer
TEL: 0086-531-88814697
FAX: 0086-531-88876156
MOB: 0086-18253153062
SKYPE:hongliangcablesales3
EMAIL: wendy(at)hldlcable.com
Send Your Inquiry Details in the Below for Free Sample, Click "Send" now!
