8.7/15kV 120mm2 PVC Insulated Earthing Copper Cable with KEMA Ghost Certificate

Applications

8.7/15kV 120mm2 PVC Insulated Earthing Copper Cable  are used as electricity power transmission lines which applies common circumstances as below:

• Mainly used for transmitting electricity power or used as control cable.
• Common operating temperature up to 90°C (emergency at 130°C and short circuit 250°C), both wet or dry location.
• Voltage rate 600/1Kv.
• Suits for main or secondary power lines of overhead (aerial) installations, direct burial underground or in dust.
• Cable trunking, cable tray, cable ladder, in tunnel or wire pipe and in switchgear and other complex operating environment.
• Works perfectly after metallic sheath (metal especially aluminum clad) or metal wire armored ( especially steel wire armored – SWA) when isolation of electromagnetic effects, anti-interference, anti-jamming and additional strength are required.

Specifications

• Conductor material: copper or aluminum.
• Qty of cores: 1C, 2C, 3C, 4C, 3C+1E, 4C+1E, 3C+2E, 5C&Above.
• Armor: non-armored, steel tape armored or steel wire armored, copper and aluminum wire/tape screen also available.
• Rare specifications or manufacturing by your sample can also be full filled.

• Nom. Cross-section of conductor	Strands No./Dia. Of Conductor	Insulation Thickness	Sheath Thickness	Approx. O.D.	Approx. Weight	Max. D.C Resistance of Conductor (20 ℃)	Testing Voltage A.C	Current Rating
  mm2	pc/mm	mm	mm	(mm)	kg/km	Ω /km	kV/5min	In air (A)	In soil(A)
  1 × 25	7/2.14	3.4	2	20.0	598	0.727	21	140	150
  1 × 35	7/2.52	3.4	2	22.0	719	0.524	21	175	180
  1 × 50	10/2.52	3.4	2	23.0	884	0.387	21	205	215
  1 × 70	14/2.52	3.4	2	24.0	1097	0.268	21	260	265
  1 × 95	19/2.52	3.4	2	26.0	1378	0.193	21	315	315
  1 × 120	24/2.52	3.4	2	28.0	1658	0.153	21	365	360
  1 × 150	30/2.52	3.4	2	30.0	1967	0.124	21	415	405
  1 × 185	37/2.52	3.4	2	31.0	2335	0.0991	21	475	455
  1 × 240	48/2.52	3.4	2	34.0	2908	0.0754	21	565	530
  1 × 300	61/2.52	3.4	2	36.0	3507	0.0601	21	645	595
  1 × 400	61/2.97	3.4	2.5	39.0	4503	0.0470	21	750	680
  1 × 500	61/3.23	3.4	2.5	42.0	5479	0.0366	21	865	765
  1 × 630	61/3.50	3.4	2.5	48.0	6952	0.0283	21	990	860
  1 × 800	91/3.20	3.4	2.6	52.0	7120	0.0221	21	1140	950
  1 × 1000	91/3.75	3.4	2.8	57.0	10500	0.0176	21	1250	1040
  3 × 25	7/2.14	3.4	2.3	41.0	895	0.727	21	120	125
  3 × 35	7/2.52	3.4	2.4	44.0	2293	0.524	21	145	155
  3 × 50	10/2.52	3.4	2.5	46.0	2812	0.387	21	175	180
  3 × 70	14/2.52	3.4	2.6	50.0	3508	0.268	21	220	220
  3 × 95	19/2.52	3.4	2.7	53.0	4402	0.193	21	265	265
  3 × 120	24/2.52	3.4	2.8	56.0	5319	0.153	21	305	300
  3 × 150	30/2.52	3.4	2.9	59.0	6309	0.124	21	350	340
  3 × 185	37/2.52	3.4	3.0	62.0	7319	0.0991	21	395	380
  3 × 240	48/2.52	3.4	3.2	68.0	9218	0.0754	21	470	435
  3 × 300	61/2.52	3.4	3.4	72.0	11159	0.0601	21	535	485
  3 × 400	61/2.97	3.4	3.6	81.0	15107	0.0470	21	610	520

Standards

• IEC 60502-2 Power cables with extruded insulation and their accessories for rated voltages of 1 kV and 3 kV.
• IEC 60754 Test on gases evolved during combustion of materials from cables.
• IEC 61034 Measurement of smoke density of cables burning under defined conditions.
• BS 7870-3 LV and MV polymeric insulated cables for use by distribution and generation utilities.
• DIN VDE0276-603 Power cables – Part 603: Distribution cables of rated voltage 0,6/1 kV.
• ANSI/NEMA WC 70-2009/ICEAS-95-658 Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy.
• AS/NZS 4026:2008 Electric cables – For underground residential distribution systems Standards Australia.
• AS/NZS 4961:2003 Electric cables – Polymeric insulated – For distribution and service applications.
• AS/NZS 5000.1:2005 Electric cables – Polymeric insulated – For working voltages up to and including 0.6/1 (1.2) kV.
• Other Equivalent standards for PVC insulated power cable.

Rated voltage: 8.7/ 15 kV

Maximum Conductor Temperature: under normal (90 ^OC), emergency (130^OC) or short circuit no more than 5 s (250℃) conditions.

Min. Ambient Temp. 0 ^OC, after installation and only when cable is in a fixed position

Min. Bending Radius: 12 x cable O.D

1. Shipping: By sea or air due to heavy weight. Samples will be send by DHL, Fedex. etc
2. Payment: We accept T/T, L/C , just choose what you like
3. Delivery time: Generally 7~10 working days upon receipt deposit. According to the quantity.
4. MOQ: Generally our MOQ is 1000meters. samples below 20 centimeter can be provided freely

Our Advantage

1. Only high quality XLPE insulation material are used.
2. Massive production offer you competitive price.
3. Free sample and OEM.