4x50mm 4x95mm 4x120mm Power cable

1. Cu/XLPE/SWA/PVC sheath Electric power cable are for laying buildings, inducts, kin tunnels, direct in ground and under water

1). CE, ISO, SGS Certificate

2). IEC Standard

3). Exported to Many Countries

4) Standard: IEC60502,GB/T 12706

5).Voltage: 0.6/1KV

2. Nominal cross-sectional areas: 1.5 mm2, 2.5 mm2, 4 mm2, 6 mm2, 10 mm2, 16 mm2, 25 mm2, 35 mm2, 50 mm2, 70 mm2, 95 mm2, 120 mm2, 150 mm2, 185 mm2, 240 mm2, 300 mm2, 400 mm2, 500 mm2,  630 mm2, 800 mm2

3. Production range: single core cable from 1.5 mm2 to 800 mm2,

                                 muli-core cable from 1.5 mm2 to 400 mm2;

4. Operating characteristics:

Rated power-frequency voltage u0/u: 0.6/1 KV

Max permissible continuous operating temperature of conductor 90

Max short-circuit temperature of the conductor shall not exceed (Max 5 seconds duration): cross-section of conductor 300 mm2

The anbient temperature under installations should not be below 0

The bending radius of single core cable should not be less than 20 times of the cable diameter ,the bending radius of multi-core cable should not be less than 15 times of the cable diameter

5. Specification: