35KV 1X800mm2 copper conductor XLPE Insulation power cable

  35KV 1X800mm2 copper conductor XLPE Insulation power cable

Applications
• Predominantly used for primary underground distribution
• Suitable for use in wet or dry locations, direct burial, underground duct, and where exposed to sunlight
• To be used at 35,000 volts or less and at conductor temperatures not to exceed 90°C for normal operation

Construction Details

• The phase conductor is concentrically stranded, compressed soft copper or 1350-H16/26 aluminum alloy
• Cable is composed of the conductor with moisture block in the strands, covered by a semi-conducting cross-linked polyethylene strand shield, a tree-retardant cross-linked polyethylene primary insulation, and a semi-conducting cross-linked polyethylene insulation shield

• Conductors are available with either 100% or 133% insulation levels 

• Concentric neutral of bare copper wires and an insulating polyethylene jacket is applied over the insulation shield
• Cable identified by surface print on the jacket and with the lightning bolt symbol for supply cables indented in the jacket

The company start manufacture  35KV 1X800mm2 copper conductor XLPE Insulation power cable since 2001, for over 14 years experience.

Start exporting worldwide since 2007,  More than 8 years Exporting expericance.

There are more than15 sets equipment for producing the 35KV power Cable  in our factory. A new workshop under building, will come to running next year.

Full set test equipment can be found in the factory, also there would be routine inspector to confirm the quality in time during the production.

Welcome to our factory ,we hope to get in touch with you .