0.6~1kv electrical ABC cable 4x25 aluminium conductor AAC AAAC ACSR poly pe xlpe pvc insulation coated overhead messenger cable

ABC cable service drop cable electrical wire electric wire Quadruplex Service Drop (ABC cable ) ACSR for Power tranmission, Aeri

Service drop cable 1. Stranded aluminium conduct 2. PE or XLPE insulation 3. ACSR, AAAC Messenger wire Application It is preferred to use of service drop (overhead messenger cable) instead of uninsulated conductors at low voltage networks. service drop (overhead messenger cable)are especially used at areas where the cost of underground networks is expensive and also for electrification of rural areas like villages. Voltage Rated voltage U0 / U = 0.6 /1 kV VAC test voltage 5 kV Technical Data Maksimum operating temperature 90 degree Maximum short-circuit temperature 250 degree.Service drop( overhead messenger cable) are especially used at areas where the cost of underground networks is expensive and also for electrification of rural areas like villages.

Service drop cable 1. Stranded aluminium conduct 2. PE or XLPE insulation 3. ACSR, AAAC Messenger wire Application It is preferred to use of service drop (overhead messenger cable) instead of uninsulated conductors at low voltage networks. service drop (overhead messenger cable)are especially used at areas where the cost of underground networks is expensive and also for electrification of rural areas like villages. Voltage Rated voltage U0 / U = 0.6 /1 kV VAC test voltage 5 kV Technical Data Maksimum operating temperature 90 degree Maximum short-circuit temperature 250 degree.Service drop( overhead messenger cable) are especially used at areas where the cost of underground networks is expensive and also for electrification of rural areas like villages.Aerial Bundle Cable / ABC cable / ABC Wire electric wire aerial cable

overhead messenger cable Standards:overhead messenger cable Applications:
Used to supply 3 phase power, usually from a pole-mounted transformer, to the user's service head where connection to the service entrance cable is made. To be used at voltages of 600 volts or less phase to phase and at conductor temperatures not to exceed 75°C for polyethylene insulated conductors or 90°C for crosslinked polyethylene (XLP) insulated conductors. 
overhead messenger cable Construction:
Conductors are concentrically stranded, compressed 1350-H19 aluminum. Insulated with either polyethylene or XLP crosslinked polyethylene. Neutral messengers are concentrically stranded 6201, AAC, or ACSR.One conductor is manufactured with an extruded ridge for phase identification.
1.B-230 Aluminum Wire, 1350-H19 for Electrical Purposes.
2.B-231 Aluminum conductors, Concentric-Lay-Stranded.
3.B-232 Aluminum Conductors, Concentric- Lay-Stranded, Coated Steel Reinforced (ACSR).
4.B-399 Concentric-Lay-Stranded, 6201-T81 Aluminum Alloy Conductors.
5.B498 Zinc-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR).
6.Quadruplex Service Drop cable meets or exceeds all applicable requirements of ANSI/ICEA S-76-474.

overhead messenger cable Using Properties
1.Rated Voltage:0.6/1kV
2.Cable installation temperature not less than -20°C
3.Max. temperature of cable at short circuit(The max. duration does not exceed 5 minutes)
For XLPE insulation is 250°C.
For HDPE insulation is 150 °C.
4.The Max. bending radius of cable shall not be less than 20Dmm(D overall diameter of cable)

Type of ABC Cable
1.Duplex Service Drop:To supply 120 volt aerial service for temporary service at construction sites,outdoor or street lighting . For service at 600 volts or lower at a conductor temperature of 75 maximum.
2.Triplex Service Drop: To supply power from the ulility`s lines to the consumer`s weatherhead. For service at 600 volts or less(phase to phase ) at a conductor temperature of 75 maximum for PE insulation or 90 maximum for XLPE insulation .
3.Quadruplex Service Drop: Used to supply 3 phase power , usually from a pole-mounted transformer to the use`s servic head where connection to the service entance cable is made . To be used at voltages of 600 volts or less phase to phase and at conductor temperature not to exceed 75 for PE insulated conductors or 90 for XLPE insulated conductors.