0.6/1kV XLPE PVC Insulated 120 150 185 240 300 sq mm2 single core electrical cables sizes

Port:	Tianjin
Payment Terms:	L/C,T/T,Western Union
Supply Ability:	5000 Kilometer/Kilometers per Month single core cable
Place of Origin:	Hebei China
Brand Name:	HAOHUA
Model Number:	Cu/XLPE/PVC/SWA/PVC
Insulation Material:	PVC/XLPE
Type:	Low Voltage
Application:	Construction
Conductor Material:	Class 1/2 annealed bare copper
Jacket:	PVC/LSZH
Standard for single core cable:	IEC 60502, BS 7870, GB/T12706
Armour for single core cable:	AWA,ATA
Material for single core cable:	Copper for power cable
Company nature:	Manufactury for single core cable
Delivery Detail:	Within 15 working days or as to the buyers' request
Packaging Detail:	single core cable 16mm 25mm 35mm 50mm 70mm 95mm 120mm 150mm 185mm should be supplied in steel or wooden drum.

0.6/1kV XLPE PVC Insulated 120 150 185 240 300 sq mm2 single core electrical cables sizes

Product Description

Brief Introduction for single core cable

0.6/1kV XLPE PVC insualted single core cable is applicable for power transmission through the power line of rated voltage 1kV and below, and it is proper to lay these cables in the fixed places, such as hotels, stations, chemical engineering and oil platforms, mines, power plants, metros, and high buildings, etc.

Characteristics for single core cable :

1)Rated voltage U0/U : 0.6/1kV

2)Maximum conductor temperature is 90°C

3)Short circuit temperature (lasting for less than 5s):less than 250 °C

4)Ambient installation temperature shall be not lower than 0°C; minimum bending radius: for single-core cable,20(D+d)(mm), for multi-core cable, 15(D+d)(mm)(D=cable outside diameter, d= nominal diameter of main conductor).

5) Cable can be laid aerially, in trough, or underground

Producr range of single core cable

Type	Cu/XLPE/SWA/PVC, Al/XLPE/SWA/PVC
Voltage	0.6/1 kV
Cores	1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E
Range of Nominal cross section	1.5 mm2 – 630 mm2
Application	XLPE insulated electrical cable applies to electrical power transmission and distribution lines with AC rated voltage U₀/U up to and including 0.6/1 kV. For laying indoors, in tunnel, cable trench, well or direct in ground, able to bear external mechanical forces, and certain force
Standard	IEC 60502, BS 7870, GB/T12706