0.6/1KV pvc/xlpe insulated power cable 5x4mm2

0.6/1KV pvc/xlpe insulated power cable 5x4mm2

Characteristics and Applications:

Low voltage pvc insulated power cable 5x4mm2 has the advantages of not only high mechanical strength, good ambient stress resistance, good electrical properties and anti-chemical corrosion, but also simple construction, light weight and convenient to use. It applies to electrical power transmission and distribution lines with A.C. rated voltage U0/U up to and including 0.6/1 kilovolts.

 

Operating characteristics: 

(1) Rated voltage U0/U is 0.6/1 kilovolts.

(2) Maximum rated temperature of cable conductor is 90℃

(3) Maximum conductor temperature is lower than 250℃ when cable is shorted for less than 5 seconds. 

(4) Ambient temperature is not lower than 0℃ and its minimum bending radius is as follows when cable is installed: for single-core calbe-20(D+d), unit: millimeter for multi-core cable-15(D+d), unit: millimeter

 

Note: D denotes the overall diameter of cable, while means the nominal diameter of the main conductor, unit: millimeter.

 

 

Technical Parameter:

Calculation condition of the ampacity ambient temperature is 25℃

conductor working temperature is 90℃

soil heat resulted from water migration when it operates continuously.

gap between axis of cable and surface of ground is 1000 millimeter when it is laid in ground.  

for multi-core cable, gap of axis of cable is 3 times O.D.

 

 

Cores and sections:

1,  2,  3,   3+1,   3+2,    3+3,  4,    4+1,    4+2,   5 and so on.

 

 Nominal Cross-sectional Areas

1.5 mm² , 2.5 mm²  ,4 mm² , 6 mm² , 10 mm²  , 16 mm² ,25 mm²  , 35 mm² , 50 mm²  ,70 mm²  ,

95 mm²  ,120 mm²  ,150 mm² ,185 mm²  ,240 mm² ,300 mm²   400 mm²  , 500 mm²  ,   630 mm²  , 

800 mm²

 

 

 Production range:

Single core cable: from 1.5 mm²  to 800 mm²,

Multi-core cable: from 1.5 mm² to 400 mm²