0.6/1kV PVC Insulated Electric Cable for Power Transmission
Constructions
Conductor: Flexible Copper Conductor
Insulation: PVC
Sheath: PVC
Note: Insulation color as per standards or at request
Applications
Used as power distribution and transmission line at rated voltage 0.6/1kV.
Suitable for burying in ground, laying down wells and under water. Able to bear certain axis pulling force.
Standards
International: IEC 60502, IEC 60228
China: GB/T 12706.1-2008
Other standards such asVDE, BS,DIN and ICEA upon request
Technical data
Rated voltage: 0.6 / 1 kV
Max. Conductor Temp.: normal (70°C), short circuit no more than 5 s (160°C when section-area below 300mm2, 140°C when section-area above 300mm2)
Min. Ambient Temp.: 0°C, after installation and only when cable is in a fixed position
Min. Bending Radius: 20 x cable O.D
Certificates
ISO, IEC, CE,VDE,RoHS, CCC, KEMA and more others at request
|
Type |
Designation |
Application |
|
|
Cu |
Al |
||
|
YJV |
YJLV |
XLPE insulated PVC sheathed power cable |
Suitable for indoor, channels, conduits. Unable to bear mechanical stress. |
|
YJY |
YJLY |
XLPE insulated PE sheathed power cable |
|
|
YJV22 |
YJLV22 |
XLPE insulated steel-tape armored PVC sheathed power cable |
Suitable for under ground, can bear mechanical stress, but can not endure large pulling force. |
|
YJV23 |
YJLV23 |
XLPE insulated steel-tape armored PE sheathed power cable |
|
|
YJV32 |
YJLV32 |
XLPE insulated fine steel-wire armored PVC sheathed power cable |
Can be installed in vertical well, and bear large mechanical pulling force. |
|
YJV42 |
YJLV42 |
XLPE insulated steel-wire armored PVC sheathed power cable |
|
|
YJV33 |
YJLV33 |
XLPE insulated fine steel-wire armored PE sheathed power cable |
|
|
YJV43 |
YJLV43 |
XLPE insulated steel-wire armored PE sheathed power cable |
|
