0.6/1kV All Kinds of Mica Fire Resistant XLPE Power Cable from Henan China

Port:	Qingdao
Payment Terms:	L/C,D/A,D/P,T/T,Western Union,MoneyGram
Supply Ability:	2000 Kilometer/Kilometers per Month 0.6/1kV All Kinds of Mica Fire Resistant XLPE Power Cable
Place of Origin:	Henan China
Brand Name:	Hongda
Model Number:	Mica XLPE Fire Resistant Cable
Insulation Material:	XLPE
Type:	Low Voltage
Application:	Underground
Conductor Material:	Copper
Jacket:	PVC
Product name:	All Kinds of Mica Fire Resistant XLPE Power Cable from Henan China
Rated voltage:	0.6/1KV
Standard:	IEC60502
Certificate:	ISO9001
Core:	Multicore
Packaging Detail:	wooden or iron drums or as your requirement 0.6/1kV All Kinds of Mica Fire Resistant XLPE Power Cable from Henan China

0.6-1kV All Kinds of Mica Fire Resistant XLPE Power Cable from Henan China

Product Description

APPLICATION

This cable is designed for areas where the integrity of the electrical properties circuit is critical in maintaining power supply. Applications can be found in emergency lightings, control and power circuits, power stations, fire alarm systems, underground tunnels, communications systems, sewage treatment plants, lifts, escalators, and high-rise buildings.

STANDARDS

Basic design to IEC 60502-1

FIRE PERFORMANCE

CIRCUIT INTEGRITY	IEC 60331-21; BS 6387 CWZ; DIN VDE 0472-814(FE180); CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3); NF C32-070-2.3(CR1); BS 7846-(F2)
SYSTEM CIRCUIT INTEGRITY	DIN 4102-12, E30 depending on lay system
FLAME RETARDANCE (SINGLE VERTICAL WIRE TEST)	EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070- 2.1(C2); CEI 20-35/1-2; EN 50265-2-1; DIN VDE 0482-265-2-1
REDUCED FIRE PROPAGATION (VERTICALLY-MOUNTED BUNDLED WIRES & CABLE TEST)	EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3- 24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070- 2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266- 2-4
HALOGEN FREE	IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*
NO CORROSIVE GAS EMISSION	IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*
MINIMUM SMOKE EMISSION	IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2; BS 7622-1&2
NO TOXIC GASES	NES 02-713; NF C 20-454

Note: Asterisk * denotes superseded standard.

VOLTAGE RATING

600/1000V

CABLE CONSTRUCTION

Conductor: Plain annealed copper wire, stranded according to IEC 60228 class 2.
Insulation: Mica glass tape covered by extruded cross-linked XLPE compound
Cabling: The cores are cabled together in concentric layers with suitable non-hygroscopic fillers.
Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1

COLOUR CODE

Insulation Colour as per BS7671

	WITH EARTH CONDUCTOR	WITHOUT EARTH CONDUCTOR
2 Cores	–	Brown, Blue
3 Cores	Yellow/Green, Brown, Blue	Brown, Gray, Black
4 Cores	Yellow/Green, Brown, Gray, Black	Brown, Gray, Black, Blue
5 Cores	Yellow/Green, Brown, Gray, Black, Blue	Brown, Gray, Black, Blue, Black
Above 5 Cores	Yellow/Green, Black Numbered	Black Numbered

Sheath Colour: Black (other colors upon request)

Physical AND THERMAL PROPERTIES

Temperature Range During Operation: -30°C ~ 90°C
Temperature Range during Installation : -5°C ~ 50°C
Minimum Bending Radius: 6 x OD

Electrical PROPERTIES

DIELECTRIC TEST:	3500 V r.m.s. x 5’ ( core / core )
INSULATION RESISTANCE	1000 MΩ x km ( at 20°C )
SHORT CIRCUIT TEMPERATURE	250°C ( up to 5 secs )

CONSTRUCTION PARAMETERS

Conductor Operating Temperature : 90°C

Ambient Temperature : 30°C

Packaging & Shipping