0.6 / 1KV 6 awg Cable concentrico Aleacion de aluminio Conductor Cable de aislamiento XLPE

 1. Applications

The concentric cable is used as electric service entrance from the power distribution
network until the meter panel (especially where it is required to prevent "black" losses
or electric power robbery), and as feeder cable from the meters panel until the panel
or general distribution panel, just as it is specified in the National Electrical Code.
This type of conductor can be used in dry and wet places, directly buried or outdoors;
its maximum temperature of operation is 70°C(PVC or PE Insulation) or 90 ºC(XLPE
Insulation) and its voltage of service for all the applications is 600 V.
2. Specifications
2.1 Conductor: Copper or Aluminum or 8000 series Aluminum Alloy
2.2 Insulation: PVC or PE or XLPE
2.3 Concentric neutral: copper or Aluminum or 8000 series Aluminum Alloy
2.4 Sheath: PVC or PE or XLPE
3. References
The following documents were referred to during the preparation of this specification. In
cases of conflict, the provisions of this specification shall take precedence.
Unless otherwise specified, the latest revision, edition and amendments shall apply.
IEC 60502-1: Power Cables with extruded insulation and their accessories for rated
voltages from 1kV (Um = 1.2kV) up to 30kV (Um = 36kV) – Part 1:
Cables for rated voltages of 1kV (Um = 1.2kV0 and 3kV (Um = 3.6kV).
UL 44: Thermoset-Insulated Wires and Cables
UL 854: Service-Entrance Cables

SCG(Sanhe Cable Group)

Our trading company's name is sanhe cable, wholly-owned factory is called sitong cable.

 Instricity inspection by professinals is guaranteed

1.100% all material must be tested.

2.All semi-finished products must be tested before entering the next process.

3.All finished products must be tested before packaging.

4.Commissioned by the authority of the third-party certification testing company for sampling.

1) Packing length:100 to 1,000m reeled in carton drum or according to customers' requirement.
2) Outer packing: wooden case, carton box.
3) Other packing requirement according to client's request.