Copper cpnductor XLPE insualted PVC sheah power cable applies to electrical power transmission and distribution lines with AC rated voltage U₀/U up to and including 0.6/1 kV. For outdoor and indoor installation in damp and wet locations, laid directly in the ground (when well protect in ducts, in trenches and in steel support brackets

Cores and sections for XLPE insulated power cable

1,  2,  3,   3+1,   3+2,    3+3,  4,    4+1,    4+2,   5 and so on.

Send  Your Inquiry Details in the Below for Free Sample, Click "Send" now!

About us 

16 years ' experience, founded in 1988

140 sets testing equipement
90-persons professional R&D team
60 advanced cable professional production lines

Mains products: Power cable, mining cable, aerial  cable, control cable ,BV wires, and other special cable for different use

FAQs

1. Which payment terms do you accept?

a) 30% DEPOSIT IN ADVINCE,BANLANCE AGAINST THE COPY OF B/L.

b) 100% L/C at sight.

2. What is your MOQ?

You are advised to please confirm it with us directly as it’s based on different cables.

Usually it’s 100 meters for Medium Voltage Cables.

3. What about your delivery time?

According to the order’s quantity . Usually is 15 – 30 working days.

4.How to packing the goods ?

Usually in wooden drum or steel wooden drums .The cable wire is usually coiled.

5.How to buy power cable if the type is unknow

Please tell me the application, we will help you find the type most appropriate.

6.The Warranty

Oversae technical service center 24 hours availiable.

 Many thanks for your reading , if any questions please feel free to contact me.

Skype:hongliangcablesales5  M:86-18560059875

Click to  inquiry now 

APPLICATION:

PVC/XLPE power cable is used to transmit and distribute power in power transmission and distribution system of 0.6/1kV or lower.

It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication

in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

TECHNICAL DATA:

CONTENT:

XLPE cable / XLPE conductor / insulated power cable, Low voltage armored XLPE power cable Cu(AL)/XLPE/SWA(STA)/PVC power cable is included the followings:

The products are mainly complying with iec 60502 standard,also can be produced according to OEM requirements and other standards, such as bs standard, din standard, ASTM standard, etc.

0.6/1KV kv multi-cores/ copper or aluminium conductor/ XLPE insulation / copper tape or copper wire screen / galvanized steel wire armored /PVC or PE sheath / power cable, This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed,so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation.

XLPE insulated power cable has a number of advantages over paper insulated and PVC insulated cable.XLPE cable has high electric strength,mechanical strength,high-ageing resisting,environmetal stress resisting antichemical corrossion,and it is simple construction,using convenient and higher operating of long term temperature.It can be laid with no drop restriction.

Various of flame-retardant and non-flame retardant XLPE cable can be manufactured with three technology(peroxide, silane and irradiation crosslinking). The Flame-Retardant cable covers all kinds of low-smoke low-halogen Low-Smoke Halogen Free,and non-smoke nonhalogented and three classes of A,B,C. XLPE cable having higher long-term working temperature and greater current rating,at the same environment XLPE cable may be reduced size(nominal cross-section)1or 2 class in comparison with paper and PVC cable.This is not only improve the quality and properties of products,but also reduce cables production costs.

Some of special XLPE cable can be manufactured according to the other standards required by customs.

STANDARDS:

International:IEC 60502, IEC 60228, (IEC 60332-3 for FR-type only)

China: GB/T 12706, (GB/T 18380-3 for FR-type only)

Other standards such as BS,DIN and ICEA upon request

INSTALLATION:

The installation temperature should not over 20℃, If the ambient temperature is lower than 0℃, the cable should be preheated.

The bending radius of cable should not less than 8 times.

After installantion, the cable should with stand voltage test for 15min. 3.5kv D.C.

ADVANTAGE:

Excellent electric and mechanical characteristics

Simple in structure,Convenient to use

Reduce costs

PACKING AND SHIPPING:

We are capable of meeting the most strict delivery schedules according to per purchase order. Meeting the deadline is always the top priority as any delay in the delivery of cable can contribute to overall project delay and cost overrun. Cable is supplied in wooden reels, corrugated boxes and coils. Cable ends are sealed with BOPP self adhesive tape and non-hygroscopic sealing caps to protect the cable ends from moisture. The required marking shall be printed with a weather-proof material on the outsides of drum according to customers requirement.

Q : Are you a manufacturer or trading company ?

A : ZMS Cable is a 30 years cable manufacturer,with over 25000 non-dust factory,we have globle valued customers from 120 countries.

Q : What's the cable MOQ?

A : Different type cables with different MOQ.

Q : How to check the sample cable quality?

A : Our cable products are ISO, CE & CCC certificated. We offer 18 months quality guarantee, best price and standard quality.

Q : What's the payment term?

A : We accept T/T, L/C, etc.It's negotiable in case of order.

Q : What's the delivery time?

A : We have cables in stock. Delivery time based on the cable order type and quantity.

Q : What's your packing?

A : Wooden drum, steel wooden drum, steel drum, flexible packing, etc.

Q : What's the delivery method?

A : By sea, by road, by railway, by air, by DHL, etc.

APPLICATION 

This XLPE insulated power cables are generally used for fixed installation. Which is suitable for building wiring, especially in areas where smoke and fume emissions may cause a potential threat to life but not for burial in the ground, either directly or in ducts.

STANDARD

The production standard for anti-flaming and fire-resistant cables is GB/T19666-2005,GB/T5023-2008,JB/T8734-2012

Also we ZMS Cable can customize the cables as required for other standards, such as BS, IEC, DIN.

CONSTRUCTION

Conductor: Annealed copper conductor or Aluminum conductor

Insulation: XLPE 

Inner Covering option: The laid up cores may be coverd by an optional extrued inner covering or separating tape. It shall be possible to separate the cores easily.

Outer Sheath option: UV resistance, hydrocarbon resistance, oil resistance, anti rodent and anti termite properties can be offered as option.

TYPE & DESIGNATION 

Established Year: 1990

Factory Area: 50000 SQ.MM

Manufacturing Capacity Each Year: 250,000 KM

Number of Employees: 70-100

Sales Revenue (2013): US $ 27.89million

Certificates: ISO9001:2008, CCC, CE, SONCAP

The head-quarter and branch international company of ZMS Cable are registered in the capital of Henan province, ZMS Cable is the earliest private enterprise in Henan (China) cable business. Our cables are manufactured using the most up-to-date technology. Modern production facilities are backed by a highly qualified work force and experienced engineers, who ensure that only cables of the highest quality leave our factory.

 We have been expanding oversea markets since 2008 by establishing our branch company HENAN ZMS CABLE IMPORT AND EXPORT CO., LTD. 

Our production back up guarantees a complete range of quality cables, supplied via our warehouse. We are also able to arrange shipments directly from our factories where substantial back-up stocks are also held

1. Q: Is your company a factory or trading company?

A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

PVC/XLPE power cable is used to transmit and distribute power in power transmission and distribution system of 0.6/1kV or lower.

It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication

in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

 TYPE & DESIGNATION OF BARE CONDUCTOR

Related Products

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Application

Used as power and connecting cables in mechanical engineering for tooling machinery, control unit, 

production lines, transportation equipment, conveyor and assembly lines as well as in plant construction 

under the circumstance that the rated voltage is up to 450/750V AC.

Specifications

1. Long-term service temperature of the cable conductor: 70 0C

2. Rated voltage: 450/750V

3. Cable lying temperature ≥0 0C

4. Cores: 2, 3, 4, 5, 6,7, 8, 10, 12, 14, 16, 19, 24, 27, 30, 37, 44, 48, 52, 61

5. Minimun bending radius:

Non armored ≥ out diameter of cable 6 times

Armored layer or copper tape shielded ≥ outer diameter of cable 12 times

Shielded layer soft cable ≥ outer diameter of cable 6 times

Note:We also produce flame-retardant control cable, low smoke halogen free flame-retardant control cable etc.

Construction and Types of control cable ZMS could supply

AUTHENTICATION

TEAM

packing:

        Wooden drum, steel wooden drum, steel drum, flexible packing, etc.

Transport:

By sea, by road, by railway, by air, by international expresss.

Trade terms:

Exw, FOB, CIF, CNF, CFR, CPT, etc.

1. Reply your inquiry in 24 working hours

2. Experienced staffs answer all your questions in fluent English.

3. Customized design is available. UEM&UBM are welcomed.

4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.

5. Special discount and protection of sales are provided to our distributor.

6. Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.

7. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.

• Q: Is your company a factory or trading company?

  A: We are factory with our own trading company. Our trade business expands home and abroad.

• Q: When can I get the price?

  A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

• Q: How can I get a sample to check your quality?

  A: After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

• Q: What is Minimum Order Quantity?

  A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

• Q: Which standards for your products?

  A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

• Q: How about delivery time?

  A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

• Q: Payment terms:

  A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight

• Q: What is your packing?

  A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Application

Distribution power cable for static application, mostly in ground, but also in water, within facilities, in cable canals, in concrete. Used in electric power plants, transformer stations, industrial plants, metropolitan networks and other electric plants. Applied in conditions requiring protection against heavier mechanical damages, but where cables are not exposed to heavier tensile strain.

Standard

HRN HD 603 S1

IEC 60502-1

DIN VDE 0276 part 603

cables with 6 and more conductors:

HRN HD 627 S1

DIN VDE 027

Construction

Conductor:Cu, class 1 or 2 acc. to HRN HD 383 / IEC 60228 / DIN VDE 0295

class 1:solid, round (RE)

class 2:multi wire stranded, round (RM) or sector (SM), multi wire exceeding 50 mm² are compacted

Insulation:PVC compound, concentrically stranded cores, colour marked acc. to HRN HD 308 S2 / VDE 0293-308, with or without protective yellow-green conductor

Filler:spouted elastomer or plastomer compound or wrapped thermoplastic tapes

Armour:dtwo galvanized steel tapes

Sheath:PVC compound

sheath colour:black

Technical data

Temperature range: 

during installation:-5 °C up to +50 °C

fixed installed:-30 °C up to +70 °C

at short circuit of max. 5 s:up to 160 °C

Nominal voltage:Uο/U = 0,6/1 kV

Test voltage:4 kV

Maximal tensile strength:50 N/mm²

Behaviour in fire:IEC 60332-1

Minimal inner bending radius: 

single core:15D

multi core:12D

Special version upon request

Cross sectional area customized

Aluminum conductor required

Advantages

Excellent electric and mechanical characteristics

Best Resistance chemical corrosion and heat-ageing,environment stress and flame-retardant

Simple in structure,Convenient to use

Reduce costs