xlpe insulated electric cable – JYTOP Cable

XLPE PVC Insulated Armoured Low Voltage Electric Cable for Power

admin — Mon, 20 Jun 2022 09:16:40 +0000

PRODUCT DESCRIPTION

APPLICATION:

PVC/XLPE power cable is used to transmit and distribute power in power transmission and distribution system of 0.6/1kV or lower.

It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication

in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

TECHNICAL DATA:

Rated Voltage; (Uo/U)(Um)	0.6/1kV
Max. working; temperature	70 °c for pvc; insulation and 90 °c for xlpe insulation
Max. temperature; during short circuit (≤5S	160°c (PVC; insulation), 250°c (XLPE insulation)
Conductor	class 1 and 2 copper or aluminum
Shape of conductor	circular and sectional
Shape of conductor	circular and sectional
Sectional area	1.5 – 500mm2
Insulation	PVC / XLPE
No. of cores	1,2,3,4,5,6
Armour	steel wire or steel tape available
Sheath	PVC
Filler	Polypropylene lament with lapped binding tape
Core-covering:	Binding tape
Min. beding radius	15 times cable radius (single core), 12 times cable radius (multi cores)

CONTENT:

XLPE cable / XLPE conductor / insulated power cable, Low voltage armored XLPE power cable Cu(AL)/XLPE/SWA(STA)/PVC power cable is included the followings:

The products are mainly complying with iec 60502 standard,also can be produced according to OEM requirements and other standards, such as bs standard, din standard, ASTM standard, etc.

0.6/1KV kv multi-cores/ copper or aluminium conductor/ XLPE insulation / copper tape or copper wire screen / galvanized steel wire armored /PVC or PE sheath / power cable, This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed,so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation.

XLPE insulated power cable has a number of advantages over paper insulated and PVC insulated cable.XLPE cable has high electric strength,mechanical strength,high-ageing resisting,environmetal stress resisting antichemical corrossion,and it is simple construction,using convenient and higher operating of long term temperature.It can be laid with no drop restriction.

Various of flame-retardant and non-flame retardant XLPE cable can be manufactured with three technology(peroxide, silane and irradiation crosslinking). The Flame-Retardant cable covers all kinds of low-smoke low-halogen Low-Smoke Halogen Free,and non-smoke nonhalogented and three classes of A,B,C. XLPE cable having higher long-term working temperature and greater current rating,at the same environment XLPE cable may be reduced size(nominal cross-section)1or 2 class in comparison with paper and PVC cable.This is not only improve the quality and properties of products,but also reduce cables production costs.

Some of special XLPE cable can be manufactured according to the other standards required by customs.

STANDARDS:

International:IEC 60502, IEC 60228, (IEC 60332-3 for FR-type only)

China: GB/T 12706, (GB/T 18380-3 for FR-type only)

Other standards such as BS,DIN and ICEA upon request

INSTALLATION:

The installation temperature should not over 20℃, If the ambient temperature is lower than 0℃, the cable should be preheated.

The bending radius of cable should not less than 8 times.

After installantion, the cable should with stand voltage test for 15min. 3.5kv D.C.

ADVANTAGE:

Excellent electric and mechanical characteristics

Simple in structure,Convenient to use

Reduce costs

PACKING AND SHIPPING:

We are capable of meeting the most strict delivery schedules according to per purchase order. Meeting the deadline is always the top priority as any delay in the delivery of cable can contribute to overall project delay and cost overrun. Cable is supplied in wooden reels, corrugated boxes and coils. Cable ends are sealed with BOPP self adhesive tape and non-hygroscopic sealing caps to protect the cable ends from moisture. The required marking shall be printed with a weather-proof material on the outsides of drum according to customers requirement.

HOT PRODUCTS

OUR COMPANY

PRODUCTS TESTING

OUR CERTIFICATIONS

FAQ

Q: Is your company a factory or trading company?

A: We are factory with our own trading company. Our trade business expands home and abroad.
Q: When can I get the price?

A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.
Q: How can I get a sample to check your quality?

A: After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.
Q: What is Minimum Order Quantity?

A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.
Q: Which standards for your products?

A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.
Q: How about delivery time?

A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.
Q: Payment terms:

A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight
Q: What is your packing?

A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

electric cable price and electrical cable specifications for underground

admin — Wed, 18 Sep 2019 03:16:15 +0000

electrical cable specifications

electric cable price and electrical cable specifications for underground

Product Description of electrical cable specifications

a, Cores and sections

1, 2, 3, 3+1, 3+2, 3+3, 4, 4+1, 4+2, 5 and so on.

No. Of Core and Sectional Area(mm2) :
1 Core 1.5-800    25-800     25-1200    25-1200    35-1200     50-1200    50-1200     50-1200
2 Core 1.5-185     25-185
3 Core 1.5-400     25-400    25-400    25-400     35-400     50-400     50-400     50-400
4 Core 2.5-400   25-400
5 Core 2.5-400       25-400

b, Construction for electrical cable specifications :

Conductor: Solid or stranded copper
Insulation: Cross-linked polyethylene (XLPE) or Polyvinyl chloride (PVC)
Filler: Polypropylene filament with lapped binding tape
Binder: Binding tape
Inner sheath: Polyvinyl chloride (PVC)
Amour: Galvanized steel wire armored(SWA) or steel tape armored(STA)
Sheath: Polyvinyl chloride (PVC)

c, Nominal Section for electrical cable specifications:
Area(mm2) :1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800

d. Operating Features for electrical cable specifications:

1)The maximum conductor operating temperature: 90°C
During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250°C
Environment temperature should be no lower than 0°C for laying the cable.
2)Bending Radius of the Cable:
Single Core Cable: Non Armored Cable 20D, Armored Cable 15D
Cores Cable: Non Armored Cable 15D, Armored Cable 12D.
Remarks: D means practical external diameter of the cable

e, Features for electrical cable specifications:

XLPE insulated power cable do not has excellent electric, mechanical properties,but also has powerful resistance against chemical corrosion,heat resistance and enviromental stress resistance. Its structure is simple. The long period operating temperature is +90 °C. It is conveninet to use and can be laid with no restriction of different level.

XLPE insulated steel wire armoured power cable: XLPE/PVC insulated power cable has a number of advantages over paper insulated and PVC insulated cable. XLPE cable has high electric strength, mechanical strength, high-ageing resisting, environmetal stress resisting antichemical corrossion, and it is simple construction, using convenient and higher operating of long term temperature. It can be laid with no drop restriction.
Various of flame-retardant and non-flame retardant XLPE cable can be manufactured with three technology(peroxide, silane and irradiation crosslinking). The flame-retardant cable covers all kinds of low-smoke low-halogen low-smoke halogen free, and non-smoke nonhalogented and three classes of

A, B, C.

2 Standard:

IEC60502,and BS6346, VDE, AS/NZS, UL,etc or as customer's request.

3 The Rated Voltage(kv):

1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35
2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 – 26/35

4 Application:

1)These cables are most suitable for direct burial or for installation on trays or ducts, Where there is
a risk of mechanical damage, armoured cables should be used.

2) For laying in ground along route with large difference of level able to bear external mechanical forces.

Technical Data:

Four cores:

3+1 cores:

Factory Show:

Package And Transportation:

Products Certifications:

Testing Equipment:

Technical quality Team:

We are specializing in the production of cables and wires,the spirt of us is "quality first, reputation first, service first, customer first"

High quality xlpe power cable Medium Voltage XLPE Insulated PVC sheathed Aluminum conductor electric cable

admin — Tue, 27 Aug 2019 14:58:10 +0000

High quality xlpe power cable Medium Voltage XLPE Insulated PVC sheathed Aluminum conductor electric cable

TOP TEN CABLE MANUFACTURER/EXPORTER IN CHINA
LARGEST CABLE MANUFACTUER IN NORTH CHINA
ANNUAL EXPORT VOLUME EXCEED 200MILLION USD
WITH UL,TUV,KEMA,CE,BV,PSB,SABS,LLOYD'S,GL,NK,KR,ABS PRODUCTS CERTIFICATIONS
WITH TUV TYPE TESTING REPORT
WIDE PRODUCTS RANGE
ISO9001,ISO18001,OHSAS18001 SYSTEM CERTIFICATIONS
CNAS APPROVAL LABROTARY

Standard:IEC60502, BS6346, VDE, AS/NZS, UL,etc

The Rated Voltage(kv):

1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35
2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 – 26/35

Number of cores:

1, 2, 3, 3+1, 3+2, 3+3, 4, 4+1, 4+2, 5 low votage

1 or 3 core medium voltage

Construction:

Conductor: Solid or stranded copper/aluminum

Insulation: Cross-linked polyethylene (XLPE)

Filler: Polypropylene filament with lapped binding tape
Binder: Binding tape
Inner sheath: Polyvinyl chloride (PVC)
Amour: Galvanized steel wire armored(SWA) or steel tape armored(STA)
Sheath: Polyvinyl chloride (PVC)

Sectional Area:

1.5 mm2 , 2.5 mm2 ,4 mm2 , 6 mm2 , 10 mm2 , 16 mm2 ,25 mm2 , 35 mm2 , 50 mm2 ,70 mm2 , 95 mm2 ,120 mm2 ,150 mm2 ,185 mm2 ,240 mm2 ,300 mm2 400 mm2 500 mm2 630 mm2 800 mm2

production range: single core cable from 1.5 mm2 to 800 mm2,muli-core cable from 1.5 mm2 to 400 mm2

Type and Name:

Model		Name	Application	Cable Cores	Section area (mm)
Copper Core	Aluminum Core	Name	Application	Cable Cores	Section area (mm)
YJV	YJLV	CU/AL Conductor, XLPE Insulated, PVC Sheathed Power Cable	XLPE insulation PVC/PE sheathed power cables are used for laying indoors and outdoors. Able to bear certain traction during installation, but not external mechanical forces and pulling forces. Single core cable can't laying in magnetic ducts .	1C 3C	25 \| 400
YJY	YJLY	CU/AL Conductor, XLPE Insulated, PE Sheathed Power Cable
YJV22	YJLV22	CU/AL Conductor, XLPE Insulated,Steel-Tape Armored,PVC Sheathed Power Cable	XLPE insulation PVC/PE sheathed steel-tape armored power cables can be buried directly .Able to bear external mechanical forces but large pulling forces.
YJV23	YJLV23	CU/AL Conductor, XLPE Insulated,Steel-Tape Armored,PVC Sheathed Power Cable
YJV32	YJLV32	CU/AL Conductor, XLPE Insulated,Thin Steel-Wire Armored,PVC Sheathed Power Cable	XLPE insulation armoured power cables can apply to shafts,water and soil. Able to bear moderate pulling forces.
YJV33	YJLV33	CU/AL Conductor, XLPE Insulated,Thin Steel-Wire Armored,PE Sheathed Power Cable
YJV42	YJLV42	CU/AL Conductor, XLPE Insulated,Thick Steel-Wire Armored,PVC Sheathed Power Cable	Steel-wire armored,PVC/PE Sheathed Power Cables are apply to shafts,water and soil.Able to bear large pulling forces.
YJV43	YJLV43	CU/AL Conductor, XLPE Insulated,Thick Steel-Wire Armored,PE Sheathed Power Cable

Packaging & Shipping

UL certificate

We are one of China top rank cable&wire manufacturer.Our products meet standards of GB, IEC DIN ASTM, JIS, NF, AS/NZS CSA GOST and so on. We also have obtained ISO9001,ISO14001,OHSAS18001, UL,CE,

KEMA, TUV, SABS,PBS,Bureau Veritas, Lloyd,GL,NK,KR certifications.

We have obtained UL certifications for TC cable, DLO cable,RHH/RHW/RHW-2,XHHW/XHHW-2/SIS, THHN,SER/SEU/USE, MV-90/MV-105,MC cable,AC cable,TECK 90,SOOW,Welding cable,Mining cable,type DG,PV cable,Shipboard cable and so on.