vvg cable – JYTOP Cable https://www.baoliyy.com Manufacture AAC/AAAC/ACSR CONDUCTOR,XLPE Cable, PVC Cable, ABC Cable, Power Cable Mon, 16 Sep 2019 02:24:26 +0000 en-US hourly 1 https://wordpress.org/?v=5.2.29 3×185+95mm2 Cable VVG type for underground https://www.baoliyy.com/3x18595mm2-cable-vvg-type-for-underground/ https://www.baoliyy.com/3x18595mm2-cable-vvg-type-for-underground/#respond Mon, 16 Sep 2019 02:24:26 +0000 https://www.baoliyy.com/3x18595mm2-cable-vvg-type-for-underground/

3×185+95mm2 Cable VVG type for underground 

Application and Description :

 

VVG cable is for Iindustrial  wiring and mains distribution. Can be laid direct in the ground, or in ducts, clipped to surface, on trays or in free air. May be embedded in concrete.

 

Standards: IEC 60502 / BS 5467

 

 

Design

 

Conductor:    stranded circular copper – class 2 according to  IEC 60228 / BS EN 60228:2005

 

Cores:               1C , 2C , 3C , 4C , 5C , 3C+1E , 4C+1E ,3C+2E

 

Insulation:       PVC- cores identification by colours

 

Filler:                Laying up with fillers

 

Inner sheath:     PVC

 

Armour:           steel or steel tapes (possible hard aluminium wires)

 

Outer sheath:  PVC

 

 Rated Voltage Uo/U (Um) :  0.6/1 KV  , 0.66/1KV

 

 Range of Nominal cross section: 1.5 mm2 ~ 630 mm2 

 

                                                                8AWG~4/0AWG,300MCM,500MCM,750MCM

 

 Mechanical characteristics:

 

 Mechanical resistance to impacts : Excellent               

 

Cable flexibility : Rigid

 

 Usage characteristics:

 

 Max. conductor temperature in service:                                   70°C

 

Short-circuit max. conductor temperature:                              250°C

 

Operating temperature, range :                                                  -25 .. 60°C

 

Weather resistance:                                                                       Very good

 

Flame retardant :                                                                             C2, NF C 32-070

 

Chemical resistance :                                                                    Accidental

 

Water proof :                                                                                    Intermittent

 

Packaging:                                                                                        Cut to length

 

 

 

Dear friends,we can design and produce power cable with International  and national standards according to your request .

 

 

 

]]> https://www.baoliyy.com/3x18595mm2-cable-vvg-type-for-underground/feed/ 0 VVG VVG-P cable 3*2.5 for 0.66 kV and 1 kV https://www.baoliyy.com/vvg-vvg-p-cable-32-5-for-0-66-kv-and-1-kv/ https://www.baoliyy.com/vvg-vvg-p-cable-32-5-for-0-66-kv-and-1-kv/#respond Mon, 16 Sep 2019 01:56:30 +0000 https://www.baoliyy.com/vvg-vvg-p-cable-32-5-for-0-66-kv-and-1-kv/

My name is Coco, glad to introduce our product " VVG VVG-P AVVG cable 3*2.5 for 0.66 kV and 1 kV ".

If you have any question, pls don't hesitate to contact us.

 

We are always trying our best to serve you better.

VVG VVG-P cable 3*2.5 for 0.66 kV and 1 kV

 

VVG is one of the most popular conductors which is used to install wiring in the lodgments, electric power stations and industrial objects, in distributive and illuminative equipment and in different industrial devices and machines. VVG is intended for electric energy transmission and distribution at nominal alternated voltage 0,66 kV and 1 kV and frequency of 50 Hz

 

Structure :

  1. 1. Core – aluminum, round or sector form with cross-sectional area from 1,5 mm² – 240 mm²;
  2. 2. Insulation – insulated PVC plasticate;
  3. 3. Sheath – PVC plasticate;
  4. 4. Quantity of cores – one insulated or stranded from 2-5 cores.

 

Product Description

 

Company Information

Zhengzhou Yifang Electric Group Inc. was found in 1998, with 140000sq area, more than 300 employees.

Our products involve low, medium and high voltage, from 1kv to 220kv, including PE/PVC/XLPE insulated power cable, ABC overhead cable, building wire, control cable, rubber cable, welding cable, bare conductor etc.

After years’ development, we have gained good reputation from our clients in Asia, Afria, Latin-America, Middle-east, Europe, etc,  and become one of the powerful manufacturer and exporters in China.

 

Certifications: 

 

Packaging & Shipping

1. power cables are usually packed in wooden drum, steel-wooden drum, steel drum or on your request.

2. PVC wires are usually packed in rolls, and on the pallet, in the wooden box or on your request.

 

Customers' visit

More than 100 customers have come to visit our company to negotiate the business or inspect the goods.

They are from Uganda, Kenya, South Africa, Philippines, Bangladesh, Iran, Russion, Italy, Guyana, Chile, Venezuela, and many other countries.

 

Contact us

Dear friend, if you have any question about 3*2.5 VVG cable

pls contact us.

You sincere friend Coco is always here waiting for you.

 

]]> https://www.baoliyy.com/vvg-vvg-p-cable-32-5-for-0-66-kv-and-1-kv/feed/ 0 VVG VBbShv VVng-LS VBbShvng-LS AVVG AVBbShv AVBbShvng-LS power cable https://www.baoliyy.com/vvg-vbbshv-vvng-ls-vbbshvng-ls-avvg-avbbshv-avbbshvng-ls-power-cable/ https://www.baoliyy.com/vvg-vbbshv-vvng-ls-vbbshvng-ls-avvg-avbbshv-avbbshvng-ls-power-cable/#respond Thu, 05 Sep 2019 13:28:29 +0000 https://www.baoliyy.com/vvg-vbbshv-vvng-ls-vbbshvng-ls-avvg-avbbshv-avbbshvng-ls-power-cable/

VVG,VBbShv,VVng-LS,VBbShvng-LS, AVVG, AVBbShv, AVVng-LS, AVBbShvng-LS

PVC insulated Copper Aluminum conductor power cables rated for 660 and 1000 V(LS in the name of cable means Low Smoke)

Equivalent

VVG – NYY-J, NYY-O;
VBbShv – Cu/PVC/STA /PVC;
VBbShvng-LS – Cu/LSON /STA /LSON ,
AVVG – NA YY-J, NA YY-O;
AVBbShv – AI /PVC/STA /PVC;
AVBbShvng-LS – AI /LSOH /STA /LSOH

 

 

 

Construction:

1. Conductor -copper (VBbShvng-LS) or aluminum (AVBbShvng -LS), solid or multiwire, round- or sectorshaped,

class 1 or 2 as per IEC 60228 in accordance with the table below:

 

Conductor designation

Nominal area of conductors, mm2

Round-shaped

Sector-shaped

Copper

aluminum

Copper

aluminum

 Solid

1.5-25

2.5-35

–

–

Multiwire

16-50

50

50-240

70-240

 

2. Insulation – PVC for AVVG, VVG, AVBbShv and VBbShv, Flameretardant PVC for AVVng-LS, VVng-LS, AVBbShvng-LS and VBbShvng-LS.

Insulated multiconductor cable conductors carry identification coloring. Neutral conductor insulation is blue. Grounding conductor insulation (PE, PEN) is in two colors (yellow-green). The identification coloring of the other conductors is either solid or in form of longitudinal stripes of at least 1 mm.

3. Twisting – Insulated conductors are twisted. Cables are of five conductors. Round-shaped conductors are twisted around a mandrel made of the sheathing PVC. Sector-shaped conductor cables have polypropilene binding tape applied around twisted conductors. Also allowed is the application of a central sheathing or insulation material filler in between the conductors.

 

For VVG, AVVG, AVVng-LS and VVng-LS cables

For VBbShv, AVBbShv, AVBbShvng-LS and VBbShvng-LS cables

4. Filling – for round-shaped core cables such as VVG and AVVG,  it is extruded from calcium carbonate filled rubber compound or similar material  to form a round section. For AVVng-LS and VVng-LS cables it is extruded from flameretardant PVC or flameretardant crude rubber 0.5 mm thick (reference value). Sector-shaped core cables come without filling.

5. Jacket – PVC applied over the filling or binder for VVG and AVVG cables and flameretardant PVC for AVVng-LS and VVng-LS cables

4. Girth insulation – PVC applied over twisted round-shaped insulated cores or binding tape at least 0.9 mm thick for VBbShv, AVBbShv cables and flameretardant PVC for AVBbShvng-LS and VBbShvng-LS cables

5. Protecting armoring

two galvinized steel armor tapes 0.3 mm or 0.5 mm thick respectively whereas the upper tape cover the gaps in between the turns of the lower one

Protective jacket for VBbShv, AVBbShv cables is from PVC and AVBbShvng-LS and VBbShvng-LS cables is from flameretardant PVC.

 

Application:

The cables are intended for transmitting and distributing electric power in fixed installations rated for nominal alternating current voltages of 0.66 KV and 1 KV  with frequencies of up to 100 Hz.

VVG and AVVG cables are meant for laying inside both dry and wet industrial premises on special trestles, in assemblies as well as for laying outdoors. Cables are not recommended for burying in trenches. Cables are flameretardant if laid singly.

 

VBbShv and AVBbShv cables are meant for burying (in trenches), in premises, tunnels, ducts, mines (except for laying in assemblies) as well as for laying outdoors if the cable is not exposed to considerable stretching effects, however, in presense of danger of mechanical damage during the operation. Cables are flameretardant if laid singly.

Flameretardant and low smoke VVng-LS, AVVng-LS, VBbShvng-LS and AVBbShvng-LS cables are meant for industrial and nuclear power plant applications when supplied to the domestic market and abroad. Cables are intended fo be operated in cable works and premises as well as for the applications in nuclear power plant units class 2, 3 and 4 as per classification OPB-88/97 (PNAE G-01-011-97). Cables are flameretardant if laid in bunches.

 

 

Technical details:

Type of climatization of cables is UHL and T, allocation category is 1 and 5 as per GOST 15150-69.

Operating temperature range ………………………………………………………………….-50°V to +50°V

Relative humidity of air at temperatures of up to 35 oC………………………………..up to 98%

Cables shall be laid and installed without preheating at temperatures not lower than …-15 0C

Minimum bending radius when laid:…………………………………………..7.5 outer diameters

Rated frequency…………………………………………………………………..50 Hz

 

AC testing voltage 50 Hz……………………………………………………………………… 3.5KV

 

Continuously permissible conductor operating heating temperature……..………………+70 0C

 

permissible conductor short-circuit temperature is maximum + 160 °C.

 

short-circuit duration shall not exceed 4 s.

 

Permissible cable emergency mode heating, not greater than:…………………………………..+80 0C

 

cable operation duration in emergency operation shall not last more than 8 hours a day and not more than 1000 h throughout their lifetime.

 

Smoke emissions in burning or smoldering of cables shall not result in decrease in light penetration in testing chamber by more than 40%.

 

Construction lengths for main conductor areas:

 

to 16 mm2……………………………………………………………………………………450 m

 

25 to 70 mm2 …………………………………………………………………………………….300 m

 

95 mm2 or greater……………………………………………………………………………….200 m

 

Guarantee service life…………………………………….5 years from putting into operation but not later than 6 months from the manufacture

 

Service life………………………………………………..  30 years

 

OKP codes:

 

35 3371 27 – VVG cables
35 3771 53 – AVVG cables
35 3371 31 – VBbShv cables 
35 3771 57 – AVBbShv cables
35 3371 35 – VVGng-LS cables
35 3371 72 – AVVGng-LS cables
35 3771 74 – AVBbShvng-LS cables
35 7771 38 – VBbShvng-LS cables 
35 3371 35 – VVG cables

 

 

 

 

]]> https://www.baoliyy.com/vvg-vbbshv-vvng-ls-vbbshvng-ls-avvg-avbbshv-avbbshvng-ls-power-cable/feed/ 0 Low fire hazard Cable VVGng-LS 1kv 4×120 mn 3×120 mm 3×25 vvg power cable https://www.baoliyy.com/low-fire-hazard-cable-vvgng-ls-1kv-4x120-mn-3x120-mm-3x25-vvg-power-cable/ https://www.baoliyy.com/low-fire-hazard-cable-vvgng-ls-1kv-4x120-mn-3x120-mm-3x25-vvg-power-cable/#respond Thu, 05 Sep 2019 10:27:14 +0000 https://www.baoliyy.com/low-fire-hazard-cable-vvgng-ls-1kv-4x120-mn-3x120-mm-3x25-vvg-power-cable/

VVG cable sample: we can offer the sample free .

Product Description

 Low fire hazard Cable VVGng-LS 1kv 4×120 mn 3×120 mm 3×25 vvg power cable

DESCRIPTION

CONSTRUCTION

Cable construction VVGng-LS – 1kV
1. Conducting copper conductor corresponding to class 1 or 2 according to GOST 22483-2012:
   – single-wire round 1.5 … 50 mm2;
   – single-wire sector 25 … 50 mm2;
   – stranded round 16 … 50 mm2;
   – multiwire round 70 … 240 mm2 for single- and two-core cables;
   – or multi-wire sector 25 … 240 mm2.
2. Insulation of PVC conductors of low fire hazard of nominal
0.8 … 1.9 mm thick.
3. Filling of low-risk internal PVC plastic compound
and outer gaps between twisted insulated conductors
stranded cables with round conductors.
4. Polypropylene fastening tape, spirally applied to twisted strands
cables with sector veins.
5. PVC sheath of reduced fire hazard corresponding to
Obp-2 category according to GOST 23286-78, nominal thickness 1.2 … 2.5 mm.

 

Cable decoding VVGng-LS – 1kV
_VVGng-LS – 1kV
copper conductor
low flammability PVC insulation
low flammability PVC sheath
no protective cover (“bare”)
reduced smoke and gas emission (low smoke)
rated voltage 1 kV

Technical characteristics of cable VVGng-LS – 1kV

Rated alternating voltage: 1 kV with frequency 50 Hz
Nominal DC voltage:

1.4 kV for single-core cables

Test voltage of 3.5 kV, frequency 50 Hz

Test voltage of 8.4 kV for single-core cables
The exposure time during the test 10 min
Insulation resistance at 20 °C not less than 7 … 12 MΩ · km
Construction length not less than 200 … 450 m
Small meters in a batch of not more than 10 … 20% of pieces from 50 m
Allowable heating temperature lived 70 °C
The maximum heating temperature of the cores is 80 °C during overload, 160 °C at short circuit current
Minimum bending radius:

7.5 outer diameters for stranded cables

10 outer diameters for single core cables
Operating temperature range

-30 … + 50 °C
Service life

not less than 30 years from the date of production

 

Product parameters

 

VVGng-LS 1×1,5 – 1kV VVGng-LS 1×2,5 – 1kV VVGng-LS 1×4,0 – 1kV VVGng-LS 1×6,0 – 1kV VVGng-LS 1×10 – 1kV
VVGng-LS 1×16 – 1kV VVGng-LS 1×25 – 1kV VVGng-LS 1×35 – 1kV VVGng-LS 1×50 – 1kV VVGng-LS 1×70 – 1kV
VVGng-LS 1×95 – 1kV VVGng-LS 1×120 – 1kV VVGng-LS 1×150 – 1kV VVGng-LS 1×185 – 1kV VVGng-LS 1×240 – 1kV
VVGng-LS 2×1,5 – 1kV VVGng-LS 2×1,5+1×1,0 – 1kV VVGng-LS 2×1,5+1×1,5 – 1kV VVGng-LS 2×2,5 – 1kV VVGng-LS 2×2,5+1×1,5 – 1kV
VVGng-LS 2×4,0 – 1kV VVGng-LS 2×4,0+1×2,5 – 1kV VVGng-LS 2×6,0 – 1kV VVGng-LS 2×6,0+1×2,5 – 1kV VVGng-LS 2×6,0+1×4,0 – 1kV
VVGng-LS 2×10 – 1kV VVGng-LS 2×10+1×4,0 – 1kV VVGng-LS 2×10+1×6,0 – 1kV VVGng-LS 2×16 – 1kV VVGng-LS 2×16+1×6,0 – 1kV
VVGng-LS 2×16+1×10 – 1kV VVGng-LS 2×25 – 1kV VVGng-LS 2×25+1×10 – 1kV VVGng-LS 2×25+1×16 – 1kV VVGng-LS 2×35 – 1kV
VVGng-LS 2×35+1×16 – 1kV VVGng-LS 2×50 – 1kV VVGng-LS 2×50+1×16 – 1kV VVGng-LS 2×50+1×25 – 1kV VVGng-LS 2×70 – 1kV *
VVGng-LS 2×70+1×25 – 1kV VVGng-LS 2×70+1×35 – 1kV VVGng-LS 2×95 – 1kV * VVGng-LS 2×95+1×35 – 1kV VVGng-LS 2×95+1×50 – 1kV
VVGng-LS 2×120 – 1kV * VVGng-LS 2×120+1×35 – 1kV VVGng-LS 2×120+1×70 – 1kV VVGng-LS 2×150 – 1kV * VVGng-LS 2×150+1×50 – 1kV
VVGng-LS 2×150+1×70 – 1kV VVGng-LS 2×185 – 1kV * VVGng-LS 2×185+1×50 – 1kV VVGng-LS 2×185+1×95 – 1kV VVGng-LS 2×240 – 1kV *
VVGng-LS 2×240+1×70 – 1kV VVGng-LS 2×240+1×120 – 1kV VVGng-LS 3×1,5 – 1kV VVGng-LS 3×1,5+1×1,0 – 1kV VVGng-LS 3×1,5+1×1,5 – 1kV
VVGng-LS 3×2,5 – 1kV VVGng-LS 3×2,5+1×1,5 – 1kV VVGng-LS 3×4,0 – 1kV VVGng-LS 3×4,0+1×2,5 – 1kV VVGng-LS 3×6,0 – 1kV
VVGng-LS 3×6,0+1×2,5 – 1kV VVGng-LS 3×6,0+1×4,0 – 1kV VVGng-LS 3×10 – 1kV VVGng-LS 3×10+1×4,0 – 1kV VVGng-LS 3×10+1×6,0 – 1kV
VVGng-LS 3×16 – 1kV VVGng-LS 3×16+1×6,0 – 1kV VVGng-LS 3×16+1×10 – 1kV VVGng-LS 3×25 – 1kV VVGng-LS 3×25+1×10 – 1kV
VVGng-LS 3×25+1×16 – 1kV VVGng-LS 3×35 – 1kV VVGng-LS 3×35+1×16 – 1kV VVGng-LS 3×50 – 1kV VVGng-LS 3×50+1×16 – 1kV
VVGng-LS 3×50+1×25 – 1kV VVGng-LS 3×70 – 1kV VVGng-LS 3×70+1×25 – 1kV VVGng-LS 3×70+1×35 – 1kV VVGng-LS 3×95 – 1kV
VVGng-LS 3×95+1×35 – 1kV VVGng-LS 3×95+1×50 – 1kV VVGng-LS 3×120 – 1kV VVGng-LS 3×120+1×35 – 1kV VVGng-LS 3×120+1×70 – 1kV
VVGng-LS 3×150 – 1kV VVGng-LS 3×150+1×50 – 1kV VVGng-LS 3×150+1×70 – 1kV VVGng-LS 3×185 – 1kV VVGng-LS 3×185+1×50 – 1kV
VVGng-LS 3×185+1×95 – 1kV VVGng-LS 3×240 – 1kV VVGng-LS 3×240+1×70 – 1kV VVGng-LS 3×240+1×120 – 1kV VVGng-LS 4×1,5 – 1kV
VVGng-LS 4×1,5+1×1,0 – 1kV VVGng-LS 4×1,5+1×1,5 – 1kV VVGng-LS 4×2,5 – 1kV VVGng-LS 4×2,5+1×1,5 – 1kV VVGng-LS 4×4,0 – 1kV
VVGng-LS 4×4,0+1×2,5 – 1kV VVGng-LS 4×6,0 – 1kV VVGng-LS 4×6,0+1×2,5 – 1kV VVGng-LS 4×6,0+1×4,0 – 1kV VVGng-LS 4×10 – 1kV
VVGng-LS 4×10+1×4,0 – 1kV VVGng-LS 4×10+1×6,0 – 1kV VVGng-LS 4×16 – 1kV VVGng-LS 4×16+1×6,0 – 1kV VVGng-LS 4×16+1×10 – 1kV
VVGng-LS 4×25 – 1kV VVGng-LS 4×25+1×10 – 1kV VVGng-LS 4×25+1×16 – 1kV VVGng-LS 4×35 – 1kV VVGng-LS 4×50 – 1kV
VVGng-LS 4×70 – 1kV VVGng-LS 4×95 – 1kV VVGng-LS 4×120 – 1kV VVGng-LS 4×150 – 1kV VVGng-LS 4×185 – 1kV
VVGng-LS 4×240 – 1kV VVGng-LS 5×1,5 – 1kV VVGng-LS 5×2,5 – 1kV VVGng-LS 5×4,0 – 1kV VVGng-LS 5×6,0 – 1kV
VVGng-LS 5×10 – 1kV VVGng-LS 5×16 – 1kV VVGng-LS 5×25 – 1kV VVGng-LS 5×35 – 1kV VVGng-LS 5×50 – 1kV
VVGng-LS 5×70 – 1kV VVGng-LS 5×95 – 1kV VVGng-LS 5×120 – 1kV VVGng-LS 5×150 – 1kV VVGng-LS 5×185 – 1kV
VVGng-LS 5×240 – 1kV        

*Further information about rating factor for certain cable arrangement can be found on supplementary technical information.

Picture of Low fire hazard Cable VVGng-LS 1kv 4×120 mn 3×120 mm 3×25 vvg power cable

 

 

Packaging & Shipping
Packaging

Packaging available on 500 or 1000 metres
Wooden & steel drums

Shipping:
Port: Tianjin, Qingdao, Shanghai or other ports as per your requirements.

Sea freight:
FOB/C&F/CIF/DDU quotation are all available.

 

FAQ

Q 1: I didn’t find the Low fire hazard Cable VVGng-LS 1kv 4×120 mn 3×120 mm 3×25 vvg power cable I need in this page?
A: Dear Friend, we supply customized service. So, you can contact me directly for the as follows information, I will reply you asap!

Q 2: What’s your Minimum Order Quantity?
A: You are advised to please confirm with us as it is based on the specification of the cables. Normally, it is 100m for small electric wires. 500 to 1000 per drum for power cable.

Q 3: What’s your delivery time?
A: It depends on whether we just has the stock for your type. Or, it takes about 7 – 15 days for normal orders.

Q 4: How can I get a sample to check your quality?
A: After price confirmation, you can require for sample to check our quality. Sample is free, but the freight charge should be paid.

Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.

 

 

Why Choose Us

1. We have a large production base, and advanced production equipment 
2.  Have an competitive price and high quality
3.  Excellent after-sale service
4.  Attractive design and various styles
5.  Free issue:packaging list,invoice,CD installation
6.  Powerful technology R&D team
7.  Strict quality assurance system and perfect testing means
8.  Advanced process equipment
9.  Painted with powerful antiseptic Anticorrosion material paints
10. Delivery on  time
11. Our roller coaster sales to Middle East,Africa,Russia,Southeast Asia, etc.
12.We have a good reputation in the overseas.

 

Contact Information

Contact information

Any needs or question for 0.6/1 kV Low voltage cu/xlpe/pvc cable copper power cable, please contact me, we will be more pleasure to service you.

Skype ID: xinyuanyy
Cellphone/WhatsApp/Wechat: +86 158 3829 0725

Email: vivian @ hdcable.com.cn

We are looking forward to your inquiry and nice cooperaton.

]]> https://www.baoliyy.com/low-fire-hazard-cable-vvgng-ls-1kv-4x120-mn-3x120-mm-3x25-vvg-power-cable/feed/ 0