Copper concentric cable

 

1. Application

    The cable are for the service-entrance.

2. Construction

    Rated Voltage: 600/1000V

    Conductor: Solid or stranded Al conductor

    Insulation: XLPE, PVC, PE

    Neutral conductor: Helically Al wire with coverage 100% and non-100% coverage

    External coverage: Weather resistant material, XLPE, PVC, PE

 

Copper concentric cable

 

    Service Entrance Cable, Type SE, In flat and In round cable, 600V

    Concentric conductor with 100% and non 100% coverage

    Individual Conductor Rated XHHW-2 or THW

    Jacket and Individual Conductor Sunlight Resistant

 

1. Application

    These requirements cover Type USE and USE-2 (below-ground) and Type SE (above-ground) power cable for installation in accordance with Article 338 and other applicable parts of the National Electrical Code (NEC). These cables are for the service-entrance and other (NEC) uses described in 1.4 1.8. In a multiple-conductor cable that is other than submersible-pump cable and does not have a grounding conductor it is appropriate to have one circuit conductor without insulation. It is also appropriate for a submersible pump cable to have a grounding conductor and for Type USE and USE-2 cables to have an insulated grounding conductor. Each insulated conductor in these cables is rated for 600V. Type USE cable has thermoset insulation, except for HDPE portion of HDPE-over-XLPE insulation where used for single-conductor Type USE cable. Type USE cable has thermoset or thermoplastic insulation.

 

2. Specification

    Type SE cable meets or exceeds UL Standard 44 for XHHW-2 conductors or UL 83 for THW conductors, UL Standard 854.

 

3. Construction

    Type SE cable is constructed with sunlight resistant Type XHHW-2 conductor or Type THW conductors. Copper conductors are annealed (soft) copper. Cable assembly plus reinforcement tape are jacketed with sunlight resistant thermoset or thermoplastic material, available as 1 conductor with a concentric ground, 2 conductor with a round and flat or concentric round, or 3 conductor with a bare ground. SE cable is jacketed with gray sunlight resistant thermoset or thermoplastic material.

 

4. Type

    Single core type round with full neutral entrance cable

    Single core type round with less neutral entrance cable

    Single core type round with full neutral and communication cores entrance cable

    Two core type Flat with full neutral entrance cable

    Two core type round with full neutral entrance cable

    Three core type round with full neutral and communication cores entrance cable

    Three core type round with less neutral entrance cable

 

We can design and produce according to client's requirement.

 

 

 

 

 

Copper concentric cable

 

1. Application

    The cable are for the service-entrance.

2. Construction

    Rated Voltage: 600/1000V

    Conductor: Solid or stranded Al conductor

    Insulation: XLPE, PVC, PE

    Neutral conductor: Helically Al wire with coverage 100% and non-100% coverage

    External coverage: Weather resistant material, XLPE, PVC, PE

 

Copper concentric cable

 

    Service Entrance Cable, Type SE, In flat and In round cable, 600V

    Concentric conductor with 100% and non 100% coverage

    Individual Conductor Rated XHHW-2 or THW

    Jacket and Individual Conductor Sunlight Resistant

 

1. Application

    These requirements cover Type USE and USE-2 (below-ground) and Type SE (above-ground) power cable for installation in accordance with Article 338 and other applicable parts of the National Electrical Code (NEC). These cables are for the service-entrance and other (NEC) uses described in 1.4 1.8. In a multiple-conductor cable that is other than submersible-pump cable and does not have a grounding conductor it is appropriate to have one circuit conductor without insulation. It is also appropriate for a submersible pump cable to have a grounding conductor and for Type USE and USE-2 cables to have an insulated grounding conductor. Each insulated conductor in these cables is rated for 600V. Type USE cable has thermoset insulation, except for HDPE portion of HDPE-over-XLPE insulation where used for single-conductor Type USE cable. Type USE cable has thermoset or thermoplastic insulation.

 

2. Specification

    Type SE cable meets or exceeds UL Standard 44 for XHHW-2 conductors or UL 83 for THW conductors, UL Standard 854.

 

3. Construction

    Type SE cable is constructed with sunlight resistant Type XHHW-2 conductor or Type THW conductors. Copper conductors are annealed (soft) copper. Cable assembly plus reinforcement tape are jacketed with sunlight resistant thermoset or thermoplastic material, available as 1 conductor with a concentric ground, 2 conductor with a round and flat or concentric round, or 3 conductor with a bare ground. SE cable is jacketed with gray sunlight resistant thermoset or thermoplastic material.

 

4. Type

    Single core type round with full neutral entrance cable

    Single core type round with less neutral entrance cable

    Single core type round with full neutral and communication cores entrance cable

    Two core type Flat with full neutral entrance cable

    Two core type round with full neutral entrance cable

    Three core type round with full neutral and communication cores entrance cable

    Three core type round with less neutral entrance cable

 

We can design and produce according to client's requirement.