0.6/1kV Low Voltage NYCY cable Concentric Cable

 

Application range

• Power and control cable for fixed installation in the following applications:

• For indoor and outdoor use

• Burial without additional, suitable underground protection according to VDE standard HD 603/VDE 0276-603 –

Part 3-G (point 4) governing PVC cables for direct burial: normal minimum installation depth 0.6 m, but at least

0.8 m under roads

• In concrete with a temperature below the maximum cable operating temperature of +70 °C according to the VDE

standard HD 603/VDE 0276-603 – Part 3-G (point 4) governing PVC cables for direct burial

• In water: no longer than 2 weeks at a time, maximum submersion depth 10 metres, only in static water/bodies of

water without shipping traffic

 

Benefits

• Concentric conductor above all as PE

 

Design

• Bare copper wire conductor

• Abbreviations “re”, “rm”, “se”, “sm”: r = round conductor form; s = sectorial conductor form; e = single-wire

conductor (wire = conductor)/braided conductor class 1 according to IEC 60228/VDE 0295 for fixed, static

applications; m = multi-wire conductor/braided conductor class 2 according to IEC 60228/VDE 0295 for fixed,

static applications, but with a slightly lower minimum bending factor

• Bare copper wire conductor

• Abbreviations “re”, “rm”, “se”, “sm”: r = round conductor form; s = sectorial conductor form; e = single-wire

conductor (wire = conductor)/braided conductor class 1 according to IEC 60228/VDE 0295 for fixed, static

applications; m = multi-wire conductor/braided conductor class 2 according to IEC 60228/VDE 0295 for fixed,

static applications, but with a slightly lower minimum bending factor

• Flame-retardant according to IEC 60332-1-2

• Current rating according to HD 603/VDE 0276-603, Part 3-G, Table 14 (buried at +20 °C ground temperature

according to HD 603/VDE 0276-603, Part 3-G, point 5) for routing underground and Table 15 (in the air at an air

temperature of +30 °C according to HD 603/VDE 0276-603, Part 3-G, point 5) when used outdoors; but always

taking into consideration corrections/reductions to the current rating that may be necessary according to VDE

0298-4, and VDE 0298-4 (also refer to the catalogue appendix T12) for installation in and on buildings

 

Technical Data

Core identification code

Up to 5 cores: colour-coded according to VDE

0293-308, refer to Appendix T9

From 6 cores: black with white numbers

Approvals

HD 603/VDE 0276-603 for NYCY with 3 or 4 cores

and the relevant additional concentric protective

conductor

HD 627/VDE 0276-627 for NYCY as from 7 cores

and with the additional, concentric protective conductor

Conductor stranding

Single or multi-wire

Minimum bending radius

Fixed installation: 12 x outer diameter

Nominal voltage

U0/U: 0.6/1.0 kV

Test voltage

4000 V

Temperature range

During installation: +5°C to +50°C

Fixed installation: -40°C to +70°C

 

 

 

Note:
1. The process of production and inspection applies to Electric Power Cable, Control Cable, Aerial Cable, House Wiring Cable and so on. The process is not all same for different types of products.
2. The process with the mark is for medium voltage power cable.

PACKING AND SHIPPING

We are capable of meeting the most strict delivery schedules according to per purchase order. Meeting the deadline is always the top priority as any delay in the delivery of cable can contribute to overall project delay and cost overrun.

Cable is supplied in wooden reels, corrugated boxes and coils. Cable ends are sealed with BOPP self adhesive tape and non-hygroscopic sealing caps to protect the cable ends from moisture. The required marking shall be printed with a weather-proof material on the outsides of drum according to customer's requirement.

 

Shanghai Shenghua Cable (Group) possesses Shenghua tenet "Strive for the Best Enterprise, Produce the Best Product, Provide the Best Service, Establish the Best Brand", insists the policy of quality first, endeavors to achieve high quality and zero defect of goods. Therefore, every client could fully benefit from Shenghua Cable's superior quality and faultless service. Meanwhile, we observe Shenghua spirit of "Do Best, Mutually Win", wish to establish long-term and stable relationship with every client. Hereby, we guarantee that:

1. Customer is God. We will cherish every client, every cooperation by heart.
2. Free pre-sales service. We will provide best proposal for each client.
3. Good sales service. We will provide free relative product operation, maintenance tips and installation commissioning
technical advisory service when establish cooperation relationship with clients.
4. Thoughtful after sales service . Our product are warranted by PICC(People's Insurance Company of China). We will
provide free maintaining and debugging within 12 month after installation(except for the wrong using).
5. We guarantee solve your problems within 24 hours in Shanghai, 72 hours for other district.
6. 24 hours hot-line telephone service. We will appoint professional person answer your question timely.

We always firmly believe that " Quality is life line, Service is laissez-passer", which will make us more closer and tight!

Shanghai Shenghua Cable (Group) Co., Ltd.

 

 

Transmission Concentric cable 
1.Applications

The concentric cable is used in electric service entrance from the power distribution network to the meter pannel, and as feeder cable from the meter pannel to the distribution pannel.
It used in dry and wet places, outdoors or directly buried.It has a maximum operating temperature of 90ºC and rated voltage of 600V and below.

2.Material

Concentric cable main contain Phase conductor, Neutral Messenger…

Conductor: Aluminum wire, 8000 series Aluminum-Alloy wire, Copper Wire

Insulation: XLPE/PE/PVC/HDPE/LLDPE…

Sheath: PVC/XLPE…….

 

Phase: All Aluminum Conductor/All Aluminum Alloy Conductor/Copper Wire (XLPE/PE/PVC Insulation )

Neutral:All Aluminum Conducotr/All Aluminum Alloy Conductor/Copper conductor (XLPE/PE/PVC Insulation )

 

3.Standard

 

Kenya Standard (KS 04-1022)

With the KS 04-1022 Standard, The phase conductor/neutral conductor shall be Aluminum Wire.

  The Insulation of phase conductor shall be Red PVC Compound,

  The Oversheath shall be an extruded layer of black PVC.

All of the characteristics of cables shall comply with table.

 

 

Copper Wire Concentric cable 

Standard:IEC 60502  UL44  UL854

 With the standard,the phase conductor,neutral conductor are Copper wire, 

           The Insulation of phase conductor shall be XLPE,

           The outer sheath shall be UV-PVC.

 

Zhengzhou Sanhe Cable Co.,Ltd. It was founded in 2008, As a manufacturer , We main business with: Aerial Bundle Cable(ABC/URD), Aluminum Conductor Steel Reinforced (ACSR), All Aluminum Conductor(AAC), All Aluminum Alloy Condcutor(AAAC), Concentric cable (SE/SER/SEU),  PVC insulated wire(Building wire),XLPE Power cable(Lower/Medium/High Voltage), THWN/TW, GSW and so on.

We accumulated much experience and mature tecnology in the past ten years.And send our cables&wires to our partners all over the world. 

Our Team

 

 

Factory Equipment 

 

 

 

 https://www.alibaba.com/product-detail/Annealed-copper-conductor-Gauge-14-to_62028259508.html

 

 

                                     

 

1. Q: Are you the manufacturer or trading company?

    A: We are the manufacturer and exporter.

 

2. Q: What's your MOQ?

    A: It's base on the cable or wire type. Mabye 2-5km.

 

3. Q: How long is your delivery date?

    A: It's general within 15 days after your prepayment,It according to quantity.

 

4.Q:What is your terms of payment ?

    A:30% T/T in advance,Then 70%  T/T or L/C balance before shipment.

 

5.Q:Do you provied sample? It's free or extra?

    A:Yes,we could offer the sample for free charge.

 

If anything else you want, pls feel free to contact with us.

 

 

 

 

 Get more information connect with 

Tina

Mobile: +86 157 3715 6317 (WhatsApp / Wechat)

Email: tina@ hdcable.com.cn

1. Appliction

    These requiremnets cover Type USE and USE-2 (below-ground) and Type SE (above-ground) power cable for installation in accordance with Article 338 and other applicable parts of the National Electrical Code (NEC). These cables are for the service-entrance and other (NEC) uses described in 1.4 1.8. In a multiple-conductor cable that is other than submersible-pump cable and does not have a grounding conductor it is appropriate to have one circuit conductor without insulation. It is also appropriate for a sunmersibe pump cable to have a grounding conductor and for Type USE and USE-2 cables to have an insulated grounding conductor. Each insulated conductor in these cables is rated for 600V. Type USE cable has thermose insulation, except for HDPE portion of HDPE-over-XLPE insulation where used for single-conductor Type USE cable. Type USE cable has thermoset or thermoplatic insulation.

 

2. Specification

    Type SE cable meets or exceeds UL Standard 44 for XHHW-2 conductors or UL 83 for THW conductors, UL Standard 854.

 

3. Construction

    Type SE cable is constructed with sunlight resistant Type XHHW-2 conductor or Type THW conductors. Copper conductors are annealed (soft) copper. Cable assembly plus reinforcement tape are jacketed with sunlight resistant thermoset or thermoplastic material, available as 1 conductor with a concetric ground, 2 conductor with a round and flat or concentric round, or 3 conductor with a bare ground. SE cable is jacketed with gray sunlight resistant thermoset or thermoplastic material.

 

4. Type

    Single core type round with full neutral entrance cable

    Single core type round with less neutral entrance cable

    Single core type round with full neutral and communication cores entrance cable

    Two core type Flat with full neutral entrance cable

    Two core type round with full neutral entrance cable

    Three core type round with full neutral and communication cores entrance cable

    Three core type round with less neutral entrance cable

We can design and produce according to client's requiremnet.

 

Get more information connect with 

Tina

Mobile: +86 157 3715 6317 (WhatsApp / Wechat)

Email: tina@ hdcable.com.cn

 

 Packing 

Steel wooden drum (fumigation)
Cable length in each drum: 1000m/2000m or as per actual cable length requirements.

 Drum size:
As per cable length and container size
*In order to quote you accurate price, kindly tell us your needed cable length quantity. Larger quantity, more discount benefit ready for you!

Shipping Port:

Tianjin, Qingdao, or other ports as per your requireents.

Sea freight:
FOB/C&F/CIF quotation are all available.

 

*For some countries such as Africa countries, middle east countries, our sea freight quotation is much cheaper than clients get from local shipping agency.

 Tina 

HENEN HONGDA CABLE CO., LTD.
Office: 21/F, Yaxing Times Square, Songshan Road, Erqi Zone, Zhengzhou 450000, China
Factory: Huijin Rd & Changping Rd, East Development Zone, Zhandian, Jiaozuo 454950, China.
Tel: +86 371 6097 5619 | Fax: +86 371 6097 5616
Email: tina @ hdcable.com.cn
Mobile: +86 15737156317 (WhatsApp / Wechat)
Skype ID: tinatian201603