lead sheath power cable – JYTOP Cable https://www.baoliyy.com Manufacture AAC/AAAC/ACSR CONDUCTOR,XLPE Cable, PVC Cable, ABC Cable, Power Cable Mon, 16 Sep 2019 02:03:53 +0000 en-US hourly 1 https://wordpress.org/?v=5.2.29 4 Phase Cores XLPE Insulated Lead Sheath Power Cable https://www.baoliyy.com/4-phase-cores-xlpe-insulated-lead-sheath-power-cable/ https://www.baoliyy.com/4-phase-cores-xlpe-insulated-lead-sheath-power-cable/#respond Mon, 16 Sep 2019 02:03:53 +0000 https://www.baoliyy.com/4-phase-cores-xlpe-insulated-lead-sheath-power-cable/

 

 

Product Description

 

1. Application

This cables are suitable for fixed laying in power transmission and distribution lines and voltage rating of up to or including 6kv.

 

2. Scope of PVC cable

Type

No. of Core

Nominal Cross-section of conductor  mm2

Cu(Al)/PVC/PVC(PE)

Cu(Al)/PVC/ATA/PVC(PE)

Cu(Al)/PVC/AWAPVC(PE)

1

1.5-1000

Cu(Al)/PVC/STA/PVC(PE)
Cu(Al)/PVC/SWA/PVC(PE)

2, 3, 4, 5

1.5-400

3+1, 4+1, 3+2

2.5-400

 

3. Cross-section area of neutral conductor

    In 3+1 core and 3+2 cores should conform to specification of following table:

 

Nominal Cross-section

Main core

2.5

4

6

10

16

25

35

50

Neutral core

1.5

2.5

4

6

10

16

16

25

 

 

Nominal Cross-section

Main core

70

95

120

150

185

240

300

400

Neutral core

35

50

70

70

95

120

150

185

 

4. Main technical Characteristics of Cable

   1) D.C .Resistance: Conductor resistance of finished cable per kilometer at 20oC is not more than the following:

 

Nominal Cross-section  mm2

15

2.5

4

6

10

16

25

Cu core

12.1

7.41

4.61

3.08

1.83

1.15

0.727

Al core

18.1

12.1

7.41

4.61

3.08

1.91

1.20

Nominal Cross-section  mm2

35

50

70

95

120

150

185

Cu core

0.524

0.387

0.268

0.193

0.153

0.124

0.0991

Al core

0.868

0.641

0.443

0.320

0.253

0.206

0.164

Nominal Cross-section  mm2

240

300

400

500

630

800

1000

Cu core

0.0754

0.0601

0.0470

0.0366

0.0283

0.0221

0.0176

Al core

0.125

0.100

0.0778

0.0605

0.0469

0.0367

0.0291

 

 

 2) Voltage Test

     Each drum of finished cable should withstand power frequency voltage 3.5kv for 5 minutes, the insulation is not breakdown.

  3) Service conditions and parameters of cable

     The cable is applied to fixed insulation for rated voltage 0.6/1kv of power transportation and distribution line.

     Max. rated temperature of conductor nominal operating 70oC.

     Short circuit: max. for 5 sec. 160oC.

     The cable is not limited by drop in level when being laid, and the environment temperature shall not be lower than 0oC.

     Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame resistance.

     Light weight, perfect bending propertied, installed and maintained easily and conveniently.

 

 

 

Production Flow

 

Certifications

 

Packaging & Shipping

 

Our Services

1. Sufficient support for our tendering representatives.

2. Qualification documents support.

3. OEM service available based on official & legal authorization.

4. Strict quality control system.

5. Faster lead time than our competitors.

6. Excellent quality with reasonable price.

7. Strong technical support (technical data, drawing, etc.)

8. Cable solutions to your particular requirements.

9. Free sample is available with economic express fee.

10. Factory acceptance test assistant.

11. Container loading design and handling.

FAQ

Why choose us ?

1. Geographical location and convenient transportation, saving transportation costs

2. Full range of products, good reputation.

3. The leading edge technology. Different dedicated engineers and technicians for factory production, domestic sales and foreign sales, service and other jobs.

4. The sophisticated management system and management team. ISO9001,14001 and GB / T28001 passed. Computer management system for sales and production, etc.

5. Advanced service concept and positive attitude.

]]> https://www.baoliyy.com/4-phase-cores-xlpe-insulated-lead-sheath-power-cable/feed/ 0 XLPE Insulated Lead Sheath Underwater PE Sheathed Power Cable https://www.baoliyy.com/xlpe-insulated-lead-sheath-underwater-pe-sheathed-power-cable/ https://www.baoliyy.com/xlpe-insulated-lead-sheath-underwater-pe-sheathed-power-cable/#respond Thu, 12 Sep 2019 08:46:01 +0000 https://www.baoliyy.com/xlpe-insulated-lead-sheath-underwater-pe-sheathed-power-cable/

 

XLPE Insulated Lead Sheath Underwater PE Sheathed Power Cable 

 

Product Description

      This product has excellent electrical properties, high working temperature of conductor, withstand short-circuit current, load flow, short-term overload capacity, long life, light weight, not drop restrictions, easy installation and operation and maintenance.

Certifications

 

 

 

Company Information

Zhengzhou Sanhe Cable Co.,Ltd. is founded in 2008 .   It located in Henan , China .      

We specialize in producing and exporting all kinds of wires and cable.

We have professional engineers and advanced technical staff in this line.

We have built favorable bussiness relationship with many customers from different markents . 

We product the wire and cable according to many standards such as : GB,IEC,ASTM,DIN,JIS,NF,BS,AS/NZS.

Trade$Market

Our Office

Our factory

 

 Our Exhibition

 

Testing Line

 

Packaging & Shipping

Packaging and Shipment

     Customerized Available.

 

FAQ

No. 1,  ——  How do your products quality?     ——   Our products are carried out 100% inspection .

No. 2, ——   What should we do , if  the Product problems occur after we use it ? 

           ——   We have  12 months quality guarantee after delivery . 
No. 3, ——  What about your company type ?  ——   manufacturer .

No.4, —— What about your company's engineer ?

          —— We have chief engineer over 26 years   experience  about cables . 

 

Contact Us

Please feel free to contact us 

 

E-mail: shcable016(at)cnzzcable.com.cn

(at=@)

TEL: +86 13783101717

Whatsapp: +86 13783101717

Wechat: q56767
]]> https://www.baoliyy.com/xlpe-insulated-lead-sheath-underwater-pe-sheathed-power-cable/feed/ 0 Low Voltage Galvanized steel wire armoured XLPE Insulation Lead Sheath power Cable with IEC 60228 Standard https://www.baoliyy.com/low-voltage-galvanized-steel-wire-armoured-xlpe-insulation-lead-sheath-power-cable-with-iec-60228-standard/ https://www.baoliyy.com/low-voltage-galvanized-steel-wire-armoured-xlpe-insulation-lead-sheath-power-cable-with-iec-60228-standard/#respond Thu, 05 Sep 2019 12:15:57 +0000 https://www.baoliyy.com/low-voltage-galvanized-steel-wire-armoured-xlpe-insulation-lead-sheath-power-cable-with-iec-60228-standard/
Product Description

 

600/1000V, XLPE Insulation Lead Sheath power Cable with IEC 60228

Low Voltage Galvanized steel wire armoured XLPE Insulation Lead Sheath power Cable with IEC 60228 Standard

1. xlpe insulation lead sheath power cable Applications

These cables are suitable for all types of low voltage industrial connection, urban power grid, construction and installation. It's very flexibility makes the installation process very easy, so it is particularly suitable for complex wiring. They can be buried or installed in pipes as well as outdoors, and can also be used for street lighting, power supply buildings, marine equipment and generators. These cables can withstand humid conditions, or even soaked in water.

 

2. xlpe insulation lead sheath power cable Strandards

UNE 21123-2, IEC 60502; IEEE 383; UNE-EN 50265-2-1, UNE-EN 60502-1, NF C 32-070

2. xlpe insulation lead sheath power cable Construction and Structure

  • The conductors shall be either of Class 1 or Class 2 of plain or metal-coated annealed copper or of plain aluminium or aluminium alloy, or of Class 5 of plain or metal-coated copper in accordance with IEC 60228.
  • Follow VDE-0295 Cl 5, IEC 60228 Cl-5
  • XLPE Insulation material and thickness shall be as per IEC 60502-1, PVC material shall be Type A as per IEC 60502-1.
  • Color coding follows VDE-0293-308
  • lead or lead alloy and shall be applied as a reasonably tight-fitting seamless tube.
  • Black soft PVC sheath
xlpe insulation lead sheath power cable Colour Code

Colour Code (1)

1 Core Red or Black
2 Cores Red, Black
3 Cores Red, Yellow, Blue
4 Cores Red, Yellow, Blue, Black
5 Cores Red, Yellow, Blue, Black, Green
Above 5 Cores Black Cores with White numerals

Colour Code (2)

1 Core Brown or Blue
2 Cores Brown, Blue
3 Cores Brown, Black, Grey
4 Cores Blue, Brown, Black, Grey
5 Cores Green/Yellow, Blue, Brown, Black, Grey
Above 5 Cores Black Cores with White numerals

Other colours can be manufactured upon request.

 

3. xlpe insulation lead sheath power cable Technical characteristics

  • Rated voltage: 600 / 1000V
  • Temperature range: -15 ° C to + 90 ° C
  • Minimum bending radius: 5 x overall diameter
  • Flame retardant: IEC 60332.1
  • Insulation resistance: 20 MΩ x km
 

4. xlpe insulation lead sheath power cable Parameters

xlpe insulation lead sheath power cable Single core(Galvanized steel wire armoured)

Nominal Cross Section Diameter of Conductor (Approx.) Nominal Insulation Thickness Nominal Inner Covering Thickness Nominal Lead Sheath Thickness Nominal Seperation Thickness Nominal dia. of Aluminium wire armour Nominal Sheath Thickness Overall Diameter (Approx.)
mm^2 mm mm mm mm mm mm mm Kg/Km
1×35 6.7 1.2 1.0 1.2 1.0 1.6 1.8 22.0
1×50 8 1.4 1.0 1.2 1.0 1.6 1.8 23.8
1×70 9.4 1.4 1.0 1.2 1.0 1.6 1.8 25.3
1×95 11 1.6 1.0 1.3 1.0 1.6 1.8 27.6
1×120 12.4 1.6 1.0 1.3 1.0 1.6 1.9 29.2
1×150 13.8 1.8 1.0 1.4 1.0 1.6 2.0 31.4
1×185 15.3 2.0 1.0 1.4 1.1 2.0 1.9 29.1
1×240 17.5 2.2 1.0 1.5 1.1 2.0 2.0 31.9
1×300 19.5 2.4 1.0 1.6 1.2 2.0 2.1 34.4
1×400 22.6 2.6 1.2 1.7 1.3 2.5 2.2 39.7
1×500 25.2 2.8 1.2 1.8 1.3 2.5 2.3 42.9
1×630 28.3 2.8 1.2 1.9 1.4 2.5 2.4 46.2

xlpe insulation lead sheath power cable Two cores(Galvanized steel wire armoured)

Nominal Cross Section Diameter of Conductor (Approx.) Nominal Insulation Thickness Nominal Inner Covering Thickness Nominal Lead Sheath Thickness Nominal Seperation Thickness Nominal dia. of Steel wire armour Nominal Sheath Thickness Overall Diameter (Approx.)
mm^2 mm mm mm mm mm mm mm Kg/Km
2×2.5 1.8 0.8 1.0 1.2 1.0 1.25 1.8 14.9
2×4 2.3 1.0 1.0 1.2 1.0 1.25 1.8 16.7
2×6 2.8 1.0 1.0 1.2 1.0 1.6 1.8 18.4
2×10 3.6 1.0 1.0 1.2 1.0 1.6 1.8 20.0
2×16 4.5 1.0 1.0 1.2 1.0 1.6 1.8 21.8
2×25 5.6 1.2 1.0 1.2 1.0 1.6 1.8 24.8
2×35 6.7 1.2 1.0 1.3 1.1 1.6 1.8 27.0
2×50 8 1.4 1.0 1.4 1.1 2.0 2.0 31.5
2×70 9.4 1.4 1.0 1.5 1.2 2.0 2.1 34.5
2×95 11 1.6 1.2 1.6 1.3 2.5 2.3 40.3
2×120 12.4 1.6 1.2 1.7 1.3 2.5 2.4 43.3
2×150 13.8 1.8 1.2 1.8 1.4 2.5 2.5 47.2
2×185 15.3 2.0 1.4 1.9 1.5 2.5 2.6 51.6
2×240 17.5 2.2 1.4 2.1 1.6 2.5 2.8 57.2
2×300 19.5 2.4 1.6 2.3 1.7 2.5 3.0 62.8

xlpe insulation lead sheath power cable Three cores(Galvanized steel wire armoured)

Nominal Cross Section Diameter of Conductor (Approx.) Nominal Insulation Thickness Nominal Inner Covering Thickness Nominal Lead Sheath Thickness Nominal Seperation Thickness Nominal dia. of Steel wire armour Nominal Sheath Thickness Overall Diameter (Approx.)
mm^2 mm mm mm mm mm mm mm Kg/Km
3×1.5 1.4 0.8 1.0 1.2 1.0 1.25 1.8 14.6
3×2.5 1.8 0.8 1.0 1.2 1.0 1.25 1.8 15.4
3×4 2.3 1.0 1.0 1.2 1.0 1.6 1.8 18.1
3×6 2.8 1.0 1.0 1.2 1.0 1.6 1.8 19.1
3×10 3.6 1.0 1.0 1.2 1.0 1.6 1.8 20.9
3×16 4.5 1.0 1.0 1.2 1.0 1.6 1.8 22.8
3×25 5.6 1.2 1.0 1.3 1.0 1.6 1.8 26.0
3×35 6.7 1.2 1.0 1.3 1.1 2.0 1.9 29.4
3×50 8 1.4 1.0 1.5 1.2 2.0 2.0 33.3
3×70 9.4 1.4 1.2 1.6 1.2 2.0 2.1 37.0
3×95 11 1.6 1.2 1.7 1.3 2.5 2.3 42.6
3×120 12.4 1.6 1.2 1.8 1.4 2.5 2.4 45.9
3×150 13.8 1.8 1.4 1.9 1.5 2.5 2.6 50.4
3×185 15.3 2.0 1.4 2.0 1.6 2.5 2.7 54.8
3×240 17.5 2.2 1.6 2.2 1.7 2.5 2.9 61.2
3×300 19.5 2.4 1.6 2.4 1.8 3.15 3.2 68.2

xlpe insulation lead sheath power cable Four cores(Galvanized steel wire armoured)

Nominal Cross Section Diameter of Conductor (Approx.) Nominal Insulation Thickness Nominal Inner Covering Thickness Nominal Lead Sheath Thickness Nominal Seperation Thickness Nominal dia. of Steel wire armour Nominal Sheath Thickness Overall Diameter (Approx.)
mm^2 mm mm mm mm mm mm mm Kg/Km
4×1.5 1.4 0.8 1.0 1.2 1.0 1.25 1.8 15.3
4×2.5 1.8 0.8 1.0 1.2 1.0 1.25 1.8 16.3
4×4 2.3 1.0 1.0 1.2 1.0 1.6 1.8 19.2
4×6 2.8 1.0 1.0 1.2 1.0 1.6 1.8 20.4
4×10 3.6 1.0 1.0 1.2 1.0 1.6 1.8 22.3
4×16 4.5 1.0 1.0 1.2 1.0 1.6 1.8 24.5
4×25 5.6 1.2 1.0 1.3 1.1 2.0 1.9 29.1
4×35 6.7 1.2 1.0 1.4 1.1 2.0 2.0 31.9
4×50 8 1.4 1.2 1.6 1.2 2.0 2.1 36.7
4×70 9.4 1.4 1.2 1.7 1.3 2.5 2.3 41.4
4×95 11 1.6 1.2 1.8 1.4 2.5 2.5 46.6
4×120 12.4 1.6 1.4 1.9 1.5 2.5 2.6 50.6
4×150 13.8 1.8 1.4 2.0 1.6 2.5 2.7 55.3
4×185 15.3 2.0 1.6 2.2 1.7 2.5 2.9 60.6
4×240 17.5 2.2 1.6 2.4 1.8 3.15 3.2 68.7
4×300 19.5 2.4 1.6 2.6 1.9 3.15 3.4 74.9

 

 

Packaging & Shipping

Packing: 

Steel wooden drum (fumigation)
Cable length in each drum: 500m/1000m or as per actual cable length requirements.

Drum size:
As per cable length and container size
*In order to quote you accurate price, kindly tell us your needed cable length quantity. Larger quantity, more discount benefit ready for you!

Shipping:
Port: Tianjin, Qingdao, or other ports as per your requireents.

Sea freight:
FOB/C&F/CIF quotation are all available.

 

Our Services

 

Our service

we are one of the biggest manufacture in china mainland. We will give you a perfect shopping experience . If you need visit our factory , we will meet you at the airport or train station.

Also we can offer other service 

Custom Merchandise:we can make cable as your need include the color ,size and so on.we also offer OEM .

Complete Course Tracking:we can offer you the service from the business begin to you get the cable and use it.

 

Company Information

 

Company information

Cable sample: we can offer the sample free .

Zhengzhou hongda cable Co., Ltd.
Established Year:1999
Registered capital of RMB:5,000,000
Factory Area:300,000m2

Main products:

Areial bundle cable ,XLPE insulated power cable ,PVC insulated power cable ,electrical wire ,bare aluminum conductor(AAC AAAC ACSR )and so on

Main export county:

USA Philippines Malaysia Indonesia Venezuela, Colombia  Mexico

Dominica  India  South  Africa  Zambia  Kenya and so on .

Why Choose Us

1. We have a large production base, and advanced production equipment 
2.  Have an competitive price and high quality
3.  Excellent after-sale service
4.  Attractive design and various styles
5.  Free issue:packaging list,invoice,CD installation
6.  Powerful technology R&D team
7.  Strict quality assurance system and perfect testing means
8.  Advanced process equipment
9.  Painted with powerful antiseptic Anticorrosion material paints
10. Delivery on  time
11. Our roller coaster sales to Middle East,Africa,Russia,Southeast Asia, etc.
12.We have a good reputation in the overseas

 

FAQ

Q 1: I didn’t find the cable I need in this page?
A: Dear Friend, we supply customized service. So, you can contact me directly for the as follows information, I will reply you asap!

Q 2: What’s your Minimum Order Quantity?
A: You are advised to please confirm with us as it is based on the specification of the cables. Normally, it is 100m for small electric wires. 500 to 1000 per drum for power cable.

Q 3: What’s your delivery time?
A: It depends on whether we just has the stock for your type. Or, it takes about 7 – 15 days for normal orders.

Q 4: How can I get a sample to check your quality?
A: After price confirmation, you can require for sample to check our quality. Sample is free, but the freight charge should be paid.

Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.

Contact Information

Contact information

 

Any needs or question ,please contact us ,we will be more pleasure to service you.

Skype ID: xinyuanyy
Cellphone/WhatsApp/Wechat/ICQ: +86 158 3829 0725

Facebook: xin.yuan.73307

We are looking forward to your inquiry and nice cooperaton.

]]> https://www.baoliyy.com/low-voltage-galvanized-steel-wire-armoured-xlpe-insulation-lead-sheath-power-cable-with-iec-60228-standard/feed/ 0