IEC standard  AAC AAAC ACSR duplex triplex cores PE jacket abc cable 

 

 

 Application:

 

Aerial Bundled Cable(ABC cable) are used primarily for but not limited to, overhead secondary distribution lines. Installed on insulators, otherwise treated as a bare conductor.

 

Covered line wire

Covered line wire is used primarily for overhead secondary distribution lines.It is not an electrically insulated conductor and is treated as bare conductor when installed.

 

Duplex service drop

To supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volts or lower at a conductor temperature of 75 °C maximum.

 

Triplex service drop

To supply power from the utility’s lines to the consumer’s weatherhead. For service at 600 volts or less (phase to phase) at a conductor temperature of 75°Cmaximum for polyethylene insulation or 90°C maximum for cross linked insulation.

 

Quadruplex service drop

 

Used to supply 3 phase power, usually from a pole-mounted transformer, to the user’s service head where connection to the service entrance cable is made. To be used at voltage of 600 volts or less phase to phase and at conductor temperature no to exceed 75°C for polyethylene insulated conductor or 90°C for cross linked polyethylene insulated conductors.

 

 

Standard:

 

l ,  ASTM: B-230 Aluminum Wire, 1350-H19 for Electrical Purposes.

      B-231 Aluminum Conductors, Concentric-Lay-Stranded.

      B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR).

      B-399 Concentric-Lay-Stranded 6201-T81 Aluminum Alloy Conductors.

2, ICEA S-61-402 and S-66-524

 

Construction:

 

The conductors are 1350-H19 aluminum, 6201-T81 Aluminum Alloy , or ACSR conductors, concentrically stranded and covered for weather proofing with polyethylene, high density polyethylene(HD) or crosslinked polyethylene(XLPE).

 

Technical Data:

 

    For ABC cable covered line wire:

 

IEC standard  AAC AAAC ACSR duplex triplex cores PE jacket abc cable 

 

 

 

Related Overhead Cable

 

 

 

 

 

 

 

IEC standard  AAC AAAC ACSR duplex triplex cores PE jacket abc cable 

 

 

 

 

 

  

 

 

 

IEC Standard XLPE Insulation ABC Cable 4 x 16mm2 0.61kv

1.Standards

The cable meets the standard requirements of GB12527-90 or Q/SL109-2002.

 

2 .Specifications

 

3.Using properties
1) Rated voltage U0/U is 0.6/1kV.
2) Maximum continuous operating temperature requirements: 
——For PE and PVC, 70°C.
——For XLPE, 90°C.
3) Installation requirements:
——Laying temperature shall not be less than -20°C.
——Minimum bending radius:
For that whose diameter is less than 25mm, shall be 4 times cable outer diameter.
For that whose diameter is equal to or greater than 25mm, shall be 6 times cable outer diameter.
——It should be considered to keep a certain distance between cables and trees during installation. Touch, between cables and trees, is allowable only for short time during operation.

 Twisted Insulated Aluminum Cable Wire Type, Designation and Applications