Copper Comductor – JYTOP Cable https://www.baoliyy.com Manufacture AAC/AAAC/ACSR CONDUCTOR,XLPE Cable, PVC Cable, ABC Cable, Power Cable Mon, 20 Jun 2022 09:15:03 +0000 en-US hourly 1 https://wordpress.org/?v=5.2.29 Copper Comductor XLPE Insulated PVC Sheath Low Voltage Power Cable https://www.baoliyy.com/copper-comductor-xlpe-insulated-pvc-sheath-low-voltage-power-cable/ https://www.baoliyy.com/copper-comductor-xlpe-insulated-pvc-sheath-low-voltage-power-cable/#respond Mon, 20 Jun 2022 09:15:03 +0000 https://www.baoliyy.com/copper-comductor-xlpe-insulated-pvc-sheath-low-voltage-power-cable/

Copper Comductor XLPE Insulated PVC Sheath Low Voltage Power Cable

 

Product Details

 

Number of Cores & Nominal Cross-section Area

Number of Cores

1

2

3

3+1

4

3+2

4+1

5

Section Area (mm2)

4 – 500

2.5 – 500

2.5 – 300

4 – 300

2.5 – 300

2.5 -300

4 – 300

2.5 – 95

 

More about 0.6/3.5kv power cable  style, Plz contact our team. We'll gvie reply ASAP.

 

 

 


0.6/3.5 KV cable , It to be used for indoors, in tunnel, in down wells,cable furrow or pipe, underground.
Note: the single core armored cables are used for D.C. system only. As for A.C. system, armor layer should be used of non-magnetic material or magnetic isolation measures.

 

 

Cable Structure:
1.  Conductor: Copper(Cu) or Aluminum
2.  PVC insulation
3.  Fill layer
4.  Around the package tape
5.  Inner Sheath
6.  Steel tape armor
7.  Outer Sheath
8.  Mark

Product Description:
–   PVC insulated PVC sheathed power cable (PVC/PVC Cable)
–   PVC insulated steel tape armored PVC sheathed power cable (PVC/STA/PVC Cable)
–   PVC insulated steel wire armored PVC sheathed power cable (PVC/SWA/PVC Cable)
–   Flame retardant PVC insulated PVC sheathed power cable (FR/PVC/PVC Cable)
–   Flame retardant PVC insulated steel tape armored PVC sheathed power cable (FR/PVC/STA/PVC Cable)
–   Flame retardant PVC insulated steel wire armored PVC sheathed power cable (FR/PVC/SWA/PVC Cable)

 

Application: 

1.steel-tape armored cable is to be laid underground, the cable could bear certain mechanical force.

2.Steel-wire cable is applicable to the well, underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint.

 

Standard: This product adopts the standards of IEC502 & IEC332-3

 

Scope of application: This item is applied for the alternating current circuitry with voltage (Uo/U) 0.6/1kV for the power supply.

 

Working conditions:

1)      This maximum working temperature of the conductor is 70°C.

2)      During having a short(lasting less than 5 seconds)the maximum temperature of the cable conductor for shall not be above 160°C.

3)      Environment temperature should be no lower than 0°C for laying the cable;

4)      Bending radius allowance of the cable;

single core cable: no steel tape cable 20D: steel tape cable 15D.

3 core cable: no steel tape cable 15D; steel tape cable 12D.

Notes: D practical external diameter of cable

Type, Description & Application of cable

Type

Description

Main application

VV

VLV

PVC insulation PVC sheath power cable

For laying in door, inducts and kin tunnels, but unable to bear pulling force and pressure.

VV22

VLV22

PVC insulated steel tape armored PVC sheathed power cable

For laying in doors, in tunnels and direct in ground, able to bear pulling force and pressure.

VV32

VLV32

PVC insulated fine steel wire armored PVC sheathed power cable

For laying down wells and under water, able to bear certain axis pulling force.

VV42

VLV42

PVC insulated steel wire armored PVC sheathed power cable

For laying down wells and under water, able to bear certain pulling force.

ZR-VV

ZR-VLV

PVC insulated PVC sheathed flame retardant power cable

For laying in door, inducts and in tunnels, but unable to bear pulling force and pressure.

ZR-VV22

ZR-VLV22

PVC insulated steel tape armored PVC sheathed flame retardant power cable

For laying in doors, in tunnels and directing ground, able to bear pulling force and pressure.

ZR-VV32

ZR-VLV32

PVC insulated fine steel wire armored PVC sheathed flame retardant power cable

For laying in doors, in wells, under water, able to bear certain pulling force.

ZR-VV42

ZR-VLV42

PVC insulated steel wire armored PVC sheathed flame retardant power cable

For laying down wells and under water, able to bear certain axis pulling force.

 

Core numbers & nominal cross-section area: see Table 2-2

Core No

1

2

3

3+1

4

3+2

4+1

5

Area

4~500

2.5~500

2.5~300

4~300

2.5~300

2.5~300

4~300

2.5~95

 

Main properties

No

Test item

Property

1

Construction

Listed to the tables

2

Conductor resistance

Listed to the tables

3

Voltage test

A.C 3.5kV 5min

No breaken

4

Mechanical properties before aging

Tensile strength

Insulation

Min.12.5N/mm²

Sheath

Min.12.5N/mm²

Elongation at break

Insulation

Min.150%

Sheath

Min.150%

Mechanical properties after aging

Tensile strength

Insulation

100°C±2°C 7days

Min.±12.5N/mm²

Sheath

100°C±2°C 7days

Min.±12.5N/mm²

Varying valve of tensile strength

Insulation

100°C±2°C 7days

Min.±25%

Sheath

100°C±2°C 7days

Min.±25%

Elongation at break

Insulation

100°C±2°C 7days

Min.±150%

Sheath

100°C±2°C 7days

Min.±150%

Varying valve of tensile strength

Insulation

100°C±2°C 7days

Min.±25%

Sheath

100°C±2°C 7days

Min.±25%

5

Flame-retardant property

Comply with GB12666.5-90(CB) and IEC332-3(CB)

6

Constant of insulation resistivity

Min at 20°C

36.7

Ki MΩ.km

Min at 70°C

0.037

 

0.6/1Kv PVC Insulated Steel Tape Armored PVC Sheathed Flame Retardant and Non-flame

 

Nom.cross sec.area of conductor(mm²)

Single quantity of Conductor

Insu.thickness(mm)

Steel tape thickness(mm)

Outer sheath thickness(mm)

Approx.dia of cable(mm)

Cable approx.weight(kg/km)

D.C. resistance

Test voltage(ac)

Cu

Al

20°CCu

20°CAl

Kv/5min

2×4

1

1.0

2×0.2

1.8

14.6

210

160

4.61

7.41

3.5

2×6

1

1.0

2×0.2

1.8

15.6

264

192

3.08

4.61

3.5

2×10

7

1.0

2×0.2

1.8

18.2

393

242

1.83

3.02

3.5

2×16

7

1.0

2×0.2

1.8

20.3

541

334

1.15

1.91

3.5

2×25

7

1.2

2×0.2

1.8

23.7

794

469

0.727

1.20

3.5

2×35

7

1.2

2×0.2

1.8

25.9

1037

585

0.524

0.868

3.5

2×50

19

1.4

2×0.2

1.8

22.6

1227

610

0.387

0.641

3.5

2×70

19

1.4

2×0.2

1.9

25.0

1650

747

0.268

0.443

3.5

2×95

19

1.6

2×0.5

2.1

30.2

2213

988

0.193

0.320

3.5

2×120

19

1.6

2×0.5

2.2

33.6

2733

1186

0.153

0.253

3.5

2×150

37

1.8

2×0.5

2.4

35.6

3396

1462

0.124

0.206

3.5

2×185

37

2.0

2×0.5

2.5

38.8

4112

1726

0.0991

0.164

3.5

 

 

 

Certifications

 

FAQ

 

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below: 

Workshops

 

Our Services

1.Sufficient support for our tendering representatives.
2.OEM service available based on official & legal authorization.
3.Strict quality control system.
4.Faster lead time than our competitors.
5.Excellent quality with reasonable price.
6.Strong technical support (technical data, drawing, etc.)
7.Cable solutions to your particular requirements.
8.Free sample is available with economic express fee.
9.12 months quality guarantee after delivery.

 

 

 

 

]]> https://www.baoliyy.com/copper-comductor-xlpe-insulated-pvc-sheath-low-voltage-power-cable/feed/ 0 CE Certification Power Cable Copper Aluminum Conductor Low Voltage Cables https://www.baoliyy.com/ce-certification-power-cable-copper-aluminum-conductor-low-voltage-cables/ https://www.baoliyy.com/ce-certification-power-cable-copper-aluminum-conductor-low-voltage-cables/#respond Mon, 20 Jun 2022 09:14:38 +0000 https://www.baoliyy.com/ce-certification-power-cable-copper-aluminum-conductor-low-voltage-cables/

CE Certification Power Cable Copper Aluminum Conductor Low Voltage Cables

 

Product Details

 

Number of Cores & Nominal Cross-section Area

Number of Cores

1

2

3

3+1

4

3+2

4+1

5

Section Area (mm2)

4 – 500

2.5 – 500

2.5 – 300

4 – 300

2.5 – 300

2.5 -300

4 – 300

2.5 – 95

 

More about 0.6/3.5kv power cable  style, Plz contact our team. We'll gvie reply ASAP.

 

 

 


0.6/3.5 KV cable , It to be used for indoors, in tunnel, in down wells,cable furrow or pipe, underground.
Note: the single core armored cables are used for D.C. system only. As for A.C. system, armor layer should be used of non-magnetic material or magnetic isolation measures.

 

 

Cable Structure:
1.  Conductor: Copper(Cu) or Aluminum
2.  PVC insulation
3.  Fill layer
4.  Around the package tape
5.  Inner Sheath
6.  Steel tape armor
7.  Outer Sheath
8.  Mark

Product Description:
–   PVC insulated PVC sheathed power cable (PVC/PVC Cable)
–   PVC insulated steel tape armored PVC sheathed power cable (PVC/STA/PVC Cable)
–   PVC insulated steel wire armored PVC sheathed power cable (PVC/SWA/PVC Cable)
–   Flame retardant PVC insulated PVC sheathed power cable (FR/PVC/PVC Cable)
–   Flame retardant PVC insulated steel tape armored PVC sheathed power cable (FR/PVC/STA/PVC Cable)
–   Flame retardant PVC insulated steel wire armored PVC sheathed power cable (FR/PVC/SWA/PVC Cable)

 

Application: 

1.steel-tape armored cable is to be laid underground, the cable could bear certain mechanical force.

2.Steel-wire cable is applicable to the well, underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint.

 

Standard: This product adopts the standards of IEC502 & IEC332-3

 

Scope of application: This item is applied for the alternating current circuitry with voltage (Uo/U) 0.6/1kV for the power supply.

 

Working conditions:

1)      This maximum working temperature of the conductor is 70°C.

2)      During having a short(lasting less than 5 seconds)the maximum temperature of the cable conductor for shall not be above 160°C.

3)      Environment temperature should be no lower than 0°C for laying the cable;

4)      Bending radius allowance of the cable;

single core cable: no steel tape cable 20D: steel tape cable 15D.

3 core cable: no steel tape cable 15D; steel tape cable 12D.

Notes: D practical external diameter of cable

Type, Description & Application of cable

Type

Description

Main application

VV

VLV

PVC insulation PVC sheath power cable

For laying in door, inducts and kin tunnels, but unable to bear pulling force and pressure.

VV22

VLV22

PVC insulated steel tape armored PVC sheathed power cable

For laying in doors, in tunnels and direct in ground, able to bear pulling force and pressure.

VV32

VLV32

PVC insulated fine steel wire armored PVC sheathed power cable

For laying down wells and under water, able to bear certain axis pulling force.

VV42

VLV42

PVC insulated steel wire armored PVC sheathed power cable

For laying down wells and under water, able to bear certain pulling force.

ZR-VV

ZR-VLV

PVC insulated PVC sheathed flame retardant power cable

For laying in door, inducts and in tunnels, but unable to bear pulling force and pressure.

ZR-VV22

ZR-VLV22

PVC insulated steel tape armored PVC sheathed flame retardant power cable

For laying in doors, in tunnels and directing ground, able to bear pulling force and pressure.

ZR-VV32

ZR-VLV32

PVC insulated fine steel wire armored PVC sheathed flame retardant power cable

For laying in doors, in wells, under water, able to bear certain pulling force.

ZR-VV42

ZR-VLV42

PVC insulated steel wire armored PVC sheathed flame retardant power cable

For laying down wells and under water, able to bear certain axis pulling force.

 

Core numbers & nominal cross-section area: see Table 2-2

Core No

1

2

3

3+1

4

3+2

4+1

5

Area

4~500

2.5~500

2.5~300

4~300

2.5~300

2.5~300

4~300

2.5~95

 

Main properties

No

Test item

Property

1

Construction

Listed to the tables

2

Conductor resistance

Listed to the tables

3

Voltage test

A.C 3.5kV 5min

No breaken

4

Mechanical properties before aging

Tensile strength

Insulation

Min.12.5N/mm²

Sheath

Min.12.5N/mm²

Elongation at break

Insulation

Min.150%

Sheath

Min.150%

Mechanical properties after aging

Tensile strength

Insulation

100°C±2°C 7days

Min.±12.5N/mm²

Sheath

100°C±2°C 7days

Min.±12.5N/mm²

Varying valve of tensile strength

Insulation

100°C±2°C 7days

Min.±25%

Sheath

100°C±2°C 7days

Min.±25%

Elongation at break

Insulation

100°C±2°C 7days

Min.±150%

Sheath

100°C±2°C 7days

Min.±150%

Varying valve of tensile strength

Insulation

100°C±2°C 7days

Min.±25%

Sheath

100°C±2°C 7days

Min.±25%

5

Flame-retardant property

Comply with GB12666.5-90(CB) and IEC332-3(CB)

6

Constant of insulation resistivity

Min at 20°C

36.7

Ki MΩ.km

Min at 70°C

0.037

 

0.6/1Kv PVC Insulated Steel Tape Armored PVC Sheathed Flame Retardant and Non-flame

 

Nom.cross sec.area of conductor(mm²)

Single quantity of Conductor

Insu.thickness(mm)

Steel tape thickness(mm)

Outer sheath thickness(mm)

Approx.dia of cable(mm)

Cable approx.weight(kg/km)

D.C. resistance

Test voltage(ac)

Cu

Al

20°CCu

20°CAl

Kv/5min

2×4

1

1.0

2×0.2

1.8

14.6

210

160

4.61

7.41

3.5

2×6

1

1.0

2×0.2

1.8

15.6

264

192

3.08

4.61

3.5

2×10

7

1.0

2×0.2

1.8

18.2

393

242

1.83

3.02

3.5

2×16

7

1.0

2×0.2

1.8

20.3

541

334

1.15

1.91

3.5

2×25

7

1.2

2×0.2

1.8

23.7

794

469

0.727

1.20

3.5

2×35

7

1.2

2×0.2

1.8

25.9

1037

585

0.524

0.868

3.5

2×50

19

1.4

2×0.2

1.8

22.6

1227

610

0.387

0.641

3.5

2×70

19

1.4

2×0.2

1.9

25.0

1650

747

0.268

0.443

3.5

2×95

19

1.6

2×0.5

2.1

30.2

2213

988

0.193

0.320

3.5

2×120

19

1.6

2×0.5

2.2

33.6

2733

1186

0.153

0.253

3.5

2×150

37

1.8

2×0.5

2.4

35.6

3396

1462

0.124

0.206

3.5

2×185

37

2.0

2×0.5

2.5

38.8

4112

1726

0.0991

0.164

3.5

 

 

 

Certifications

 

FAQ

 

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below: 

Workshops

 

Our Services

1.Sufficient support for our tendering representatives.
2.OEM service available based on official & legal authorization.
3.Strict quality control system.
4.Faster lead time than our competitors.
5.Excellent quality with reasonable price.
6.Strong technical support (technical data, drawing, etc.)
7.Cable solutions to your particular requirements.
8.Free sample is available with economic express fee.
9.12 months quality guarantee after delivery.

 

 

 

 

]]> https://www.baoliyy.com/ce-certification-power-cable-copper-aluminum-conductor-low-voltage-cables/feed/ 0 10mm Single core Copper Comductor PVC sheathed power cable https://www.baoliyy.com/10mm-single-core-copper-comductor-pvc-sheathed-power-cable/ https://www.baoliyy.com/10mm-single-core-copper-comductor-pvc-sheathed-power-cable/#respond Sat, 28 Sep 2019 04:06:43 +0000 https://www.baoliyy.com/10mm-single-core-copper-comductor-pvc-sheathed-power-cable/
Product Description
Description:
CU/XLPE/PVC POWER CABLE
Conductor:
Bare Copper Conductor of Class 1/2 (Solid)
Insulation:
XLPE Compound
Insulation Color:
Red, Blue, Grey, Yellow/Green or as request
Sheath:
PVC Compound
Sheath Color:
Black
Temperature Range:
-20 -90℃
Nominal Voltage:
600/1000V
Test Voltage:
3500 V
Minimal Bending Radius
15D for Single Core    12D for Multicore
Standard:
GB/T12706.2-2008

Application:

Distribution and signal power cable for static outdoor application (with protection against direct UV-irradiation), in ground, in water, within facilities, in cable canals, in concrete, in conditions where heavier mechanical loads and specially tensile strains, are not expected. Used in electric power plants, transformer stations, industrial plants, metropolitan networks and in other electric plants, same as for connection of signalling devices in industry, traffic and similar.

Detailed Images
Packing & Delivery

Packaging Details: pp bag,wooden drum, wooden-steel drum, or per request

Delivery Detail:14 days after payment

Production Lines

   5Production lines            8Series          50Varieties    1000Specifications

Sanheng owns more than 5 production lines, which are used mainly to produce power cable, control cable, pvc insulated building wire, pvc insulated&sheathed cable, rubber cable, welding cable, overhead cable, and bare conductor of such 8 series, which can be divided into over 50 varieties, and subdivided into 1000 specifications.

The company owns advanced testing equipment and professional inspectors. Each product is inspected according to the standard of national quality management system.

The advanced science and technology, first-rate productive equipment and superuor production line ensure the stability of the products. Word is changeable and Sanheng will always keep pace with the word.

Our Service

Payment Item

1. T/T

2. L/C

3. West Union

4. Cash

5. Paypal

6. Money Gram

7. Others

Trade Terms

1. EXW: Factory Works

2. FOB: Free on Board

3. CIF: Cost+ Insurance+Freight

4. DDP: Delivered Duty Paid

5. DDU:Delivered Duty Unpaid

Transportation

1. Truck

2. Railway

3. Express

4. Air 

5. Sea

Certification

 .The technology is the core of the product, the high grade product is the guarantee which wins. Each detail dedicated,is sparking all we and adeptly grasps to the technical profound understanding, qualitified management, creates a higher value for our customer.

FAQ

1.What is your quality control?
-Quality is our soul and culture.We have 100%strict inspection and testing before shipment.We will return the money to you if there is quality problem.
2.Can you accept small order?
-Yes,small order is available in our company.We support new project of our customers as we know business is always from small to big. Your sucess is my business.
3.Can I order samples before placing the bulk order?
-Yes,samples is certainly for your test before the bulk order.It is normal process,we always deal with other clients.
However,we will charge for a small amount of deposit in case the investment on new samples.But please donot worry,the sample deposit will refund to you when bulk order fixed.
4.What is the lead time for samples?
–About sample making,it usually takes 7-15days include testing to make sure its excellent.
If urgently,please kindly let us know,we will do our best to work overtime to speed up it.
5.Can you supply customized products and logo?
-Yes,of course we can.We supply OEM&ODM service.You can send us your drawing.
You have the idea,we turn it into excellent product for you.

]]> https://www.baoliyy.com/10mm-single-core-copper-comductor-pvc-sheathed-power-cable/feed/ 0