Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Get more information connect with 

Tina

Mobile: +86 157 3715 6317 (WhatsApp / Wechat)

Email: tina@ hdcable.com.cn

CU conductor XLPE insulated PVC sheated steel wire armored power cable  not only have excellent electric, mechanical properties, but also have powerful resistance against chemical corrosion, heataging and environmental stress. Their structures are simple. The permissible maximum operating temperature is 90'C. It is convenient for using, and they can be laid with no restriction of different elevation.

 Packing 

Steel wooden drum (fumigation)
Cable length in each drum: 1000m/2000m or as per actual cable length requirements.

 Drum size:
As per cable length and container size
*In order to quote you accurate price, kindly tell us your needed cable length quantity. Larger quantity, more discount benefit ready for you!

Shipping Port:

Tianjin, Qingdao, or other ports as per your requireents.

Sea freight:
FOB/C&F/CIF quotation are all available.

*For some countries such as Africa countries, middle east countries, our sea freight quotation is much cheaper than clients get from local shipping agency.

As you know there are so many cable manufactures, ZHENGZHOU HONGDA CABLE CO., LTD is one of the biggest manufactures in china-mainland. We will give you a perfect shopping experience . If you need visit our factory , we will meet you at the airport or train station.

Also we can offer other service 

Custom Merchandise:we can make cable as your need include the color ,size and so on.we also offer OEM .

Complete Course Tracking:we can offer you the service from the business begin to you get the cable and use it 

Cable sample : we can offer the sample free

 Quality And Safety

• Hongda Cable was founded in 1999 with almost 17 years of experience in the cable industry.
• Our manufacturing facilities are equipped with state-of-the-art technology, so we are able to meet our customers' needs for a wide range of industrial cables.
• With knowledgable engineers, rigorous quality standards and customer-centered core values, we are always ready to provide the best available products and services.
• For customers inquiring about our services, we offer product testing and sample analysis against international standards–free of charge.

Complete Inventory And Fast Delivery

• Our integrated manufacturing and storage facilities enable us to offer flexibility in specifications and fast turnaround time.
• Providing outstanding service level, Hongda Cable will meet your requirements for both standard products from our catalog and custom solutions.

Customized Solutions And Tailored Services

• With 17 years of experience, we are proud of our industry-leading R&D center and able to meet our customers' needs.
• Hongda Cable specializes in the design, manufacturing, and distribution of special industrial cable products. We welcome any ODM inquiries.

 Tina 

HENEN HONGDA CABLE CO., LTD.
Office: 21/F, Yaxing Times Square, Songshan Road, Erqi Zone, Zhengzhou 450000, China
Factory: Huijin Rd & Changping Rd, East Development Zone, Zhandian, Jiaozuo 454950, China.
Tel: +86 371 6097 5619 | Fax: +86 371 6097 5616
Email: tina @ hdcable.com.cn
Mobile: +86 15737156317 (WhatsApp / Wechat)
Skype ID: tinatian201603