630mm2 single core cable – JYTOP Cable

Single Core XLPE 0.6/1kV Cable 1Cx630mm2 Cu/XLPE/PVC(5V-90)

admin — Tue, 21 Jun 2022 01:00:29 +0000

0.6/1(1.2)kV 630mm2 single core cable

1. 630mm2 single core cable Simple Introduction:

-Conductor: Solid or stranded Aluminu

-Insulation: Cross-linked polyethylene( XLPE or PVC)
-Circuit identification: The insulation shall be red, black
-Filler: Polypropylene lament with lapped binding tape
-Inner Sheath: Polyvinyl chloride (Black)
-Armor: Galvanized steel wire/steel tape/Unarmored/Aluminum wire
-Core-covering: Binding tape
-Outer Sheath: Polyvinyl chloride (Black)

2. Standard

a. 630mm2 single core cable meet the China’s standard of GB/T14049-2008

b. We also can meet IEC, ASTM, SB, DIN and other international stendars.

3. Specification:

Type	Designation	Application
VV	Copper conductor ,PVC insulated ,PVC sheathed power cable	630mm2 single core cable is used for laying indoors, in tunnel or cable trench,unable to bear extermal mechanical forces. Single core cable is not permissible to lay in magnetic duct
VLV	Aluminium conductor ,PVC insulated ,PVC sheathed power cable
VY	Copper conductor, PVC insulated, PE sheathed power cable
VLY	Aluminium conductor ,PVC insulated ,PE sheathed power cable
VV22	Copper conductor ,PVC insulated ,steel tape armoured ,PVC sheathed power cable	For laying indoors, in cable trench or direct in ground ,able to bear external mechanical forces, but unable to bear pulling force
VLV22	Aluminium conductor ,PVC insulated ,steel tape armoured ,PVC sheathed power cable
VV23	Copper conductor ,PVC insualted ,steel tape armoured ,PE sheathed power cable
VLV23	Alunminium conductor ,PVC insulated ,steel tape armoured ,PE sheathed power cable
VV32	Copper conductor, PVC insulated, steel wire armoured,PVC insulated power cable	For laying indoors, in cable or direct in ground ,able to bear external mechanical forces, but unable to bear large pulling forces
VLV32	Aluminium conductor, PVC insulated ,steel tape armoured ,PVC sheathed power cable
VV33	Copper conductor, PVC insulated steel wire armoured , PE sheathed power cable
VLV33	Aluminium conductor , PVC insulated , streel wire armoured ,PE sheathed power cable
Note: The armoured 1Cx 185mm2 Copper Cable is only used for D.C.system. As for A.C.system,non-magnetic armored material should be applied

4.Nominal Cross-sectional Areas:

1.5 mm2 , 2.5 mm2 ,4 mm2 , 6 mm2 , 10 mm2 , 16 mm2 ,25 mm2 , 35 mm2 , 50 mm2 ,70 mm2 , 95 mm2 ,120 mm2 ,150 mm2 ,185 mm2 ,240 mm2 ,300 mm2 400 mm2 500 mm2 630 mm2 800 mm2

5. Production Range:

single core cable from 1.5 mm2 to 800 mm2,muli-core cable from 1.5 mm2 to 400 mm2

6. Operating Characteristics:

-Rated power-frequency voltage u0/u:0.6/1 KV

Max permissible continuous operating temperature of conductor 70

Max short-circuit temperature of the conductor shall not exceed (Max 5 seconds duration): cross-section of conductor 300 mm2

7. 630mm2 single core cable Product Show:

8.Packing 630mm2 single core cable

9. Quality Control 630mm2 single core cable

10. Factory Production Machines 630mm2 single core cable

Underground Single Core CU XLPE PVC AWA PVC 11kv Aluminum Wire Armored Power Cable 630mm2 500mm2 300mm2 400mm2

admin — Mon, 20 Jun 2022 10:17:26 +0000

Product Description

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

NO. Cross- Section Area	Copper Wire Screen Area*	NO. Sheath Thickness	NO. Overall Diameter	Approx. Weight
NO. Cross- Section Area	Copper Wire Screen Area*	NO. Sheath Thickness	NO. Overall Diameter	N2XSY/ N2XSH CU	N2XS2Y CU	N2XS (F) 2Y CU
mm2	mm	mm	mm	kg / km	kg / km	kg / km
25	16	1.8	29	1000	900	1100
35	16	1.8	30	1100	1050	1200
50	16	1.8	31	1250	1150	1350
70	16	1.9	33	1500	1350	1600
95	16	1.9	34	1800	1650	1900
120	16	2.0	35	2150	1900	2250
150	25	2.0	37	2400	2250	2500
185	25	2.1	38	2800	2600	2900
240	25	2.1	42	3400	3200	3500
300	25	2.2	43	4000	3800	4150
400	35	2.3	44	4950	4750	5100
500	35	2.4	46	6050	5800	6200
630	35	2.5	50	8150	8050	8300
800	35	2.6	53	9600	9450	9800

Packaging & Shipping

Wooden drum, steel wooden drum, steel drum, flexible packing, etc.

By sea, by road, by railway, by air, by international expresss.

Trade terms:

Exw, FOB, CIF, CNF, CFR, CPT, etc.

Related Products


ABC twist cable	LV Copper Power Cable	Bare Conductor ACSR

Aerial Bundled Cable with IEC60520 Standard	0.6/1kV overhead aerial bundled cable	Low Voltage Armored Power Cable

FAQ

Q: Is your company a factory or trading company?

A: We are factory with our own trading company. Our trade business expands home and abroad.
Q:When can I get the price?

A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.
Q:How can I get a sample to check your quality?

A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.
Q: What is Minimum Order Quantity?

A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.
Q: Which standards for your products?

A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.
Q: How about delivery time?

A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.
Q: Payment terms:

A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.
Q: What is your packing?

A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.