Specifications

FAA-L-824 Type C Airport Lighting Power Cable

Single conductor / 8, 6 and 4 AWG / 5000 volt / XLPE insulation / copper tape shield / PVC jacket

As per FAA L-824 Type C and listed in the FAA AC 150/5345-53 Appendix 3. They are rated for use at 90°C in wet or dry conditions.FAA L-824 cables are suitable for use in conduit, duct,aerial and direct burial installations up to 5000 volts.
The PVC jacket offers additional protection from de-icing fluids. Copper shielding provides protection against EMI.

 

Features
1. CONDUCTOR
Class B or C, soft drawn bare or tinned copper,stranded to ASTM B3 or ASTM B33.
2. INSULATION SYSTEM
Extruded semi-conducting crosslinked polyethylene (XLPE) applied over the conductor. Heat and moisture resistant crosslinked polyethylene (XLPE) insulation. Semi-conducting tape (10 mils) helically applied over the insulation, printed “SEMI-CONDUCTING REMOVE BEFORE SPLICING OR TERMINATING.”
3. SHIELD

Helically-applied 5 mil bare copper tape applied directly over the insulation system.
4. JACKET
PolyVinyl Chloride (PVC) compound in accordance with ICEA S-93-639 / NEMA WC74.

UL-1072 Type MV-90

 

 

 

Substitute XX in Part Number for two-letter color code, i.e. BK – Black, RD – Red, etc.
The data herein is approximate and subject to normal manufacturing tolerances.
Information is subject to change without notice. Consult factory for a variety of alternate constructions for specific applications

 

Available colors: Black, Blue ,Green ,Orange ,Red ,White

 

FAA-L-824 Type C Airport Lighting Power Cable  # 8  5KV Airfield

Specifications

FAA-L-824 Type C Airport Lighting Power Cable

Single conductor / 8, 6 and 4 AWG / 5000 volt / XLPE insulation / copper tape shield / PVC jacket

As per FAA L-824 Type C and listed in the FAA AC 150/5345-53 Appendix 3. They are rated for use at 90°C in wet or dry conditions.FAA L-824 cables are suitable for use in conduit, duct,aerial and direct burial installations up to 5000 volts.
The PVC jacket offers additional protection from de-icing fluids. Copper shielding provides protection against EMI.

 

Features
1. CONDUCTOR
Class B or C, soft drawn bare or tinned copper,stranded to ASTM B3 or ASTM B33.
2. INSULATION SYSTEM
Extruded semi-conducting crosslinked polyethylene (XLPE) applied over the conductor. Heat and moisture resistant crosslinked polyethylene (XLPE) insulation. Semi-conducting tape (10 mils) helically applied over the insulation, printed “SEMI-CONDUCTING REMOVE BEFORE SPLICING OR TERMINATING.”
3. SHIELD

Helically-applied 5 mil bare copper tape applied directly over the insulation system.
4. JACKET
PolyVinyl Chloride (PVC) compound in accordance with ICEA S-93-639 / NEMA WC74.

UL-1072 Type MV-90

 

 

 

Substitute XX in Part Number for two-letter color code, i.e. BK – Black, RD – Red, etc.
The data herein is approximate and subject to normal manufacturing tolerances.
Information is subject to change without notice. Consult factory for a variety of alternate constructions for specific applications

 

Available colors: Black, Blue ,Green ,Orange ,Red ,White