50mm2 cable – JYTOP Cable https://www.baoliyy.com Manufacture AAC/AAAC/ACSR CONDUCTOR,XLPE Cable, PVC Cable, ABC Cable, Power Cable Tue, 21 Jun 2022 01:00:38 +0000 en-US hourly 1 https://wordpress.org/?v=5.2.29 0.6/1 kV Cu/XLPE/PVC(CXV) 1x50mm2 Copper XLPE Cable https://www.baoliyy.com/0-6-1-kv-cu-xlpe-pvccxv-1x50mm2-copper-xlpe-cable/ https://www.baoliyy.com/0-6-1-kv-cu-xlpe-pvccxv-1x50mm2-copper-xlpe-cable/#respond Tue, 21 Jun 2022 01:00:38 +0000 https://www.baoliyy.com/0-6-1-kv-cu-xlpe-pvccxv-1x50mm2-copper-xlpe-cable/

0.6/1(1.2)kV  1*50mm2 Copper Cable

 

1. 1*50 copper cable Simple Introduction:

-Conductor: Solid or stranded Aluminu

-Insulation: Cross-linked polyethylene( XLPE or PVC)
-Circuit identification: The insulation shall be red, black
-Filler: Polypropylene lament with lapped binding tape
-Inner Sheath: Polyvinyl chloride (Black)
-Armor: Galvanized steel wire/steel tape/Unarmored/Aluminum wire
-Core-covering: Binding tape
-Outer Sheath: Polyvinyl chloride (Black)

2. Standard 

a. 1*50 copper cable meet the China’s standard of GB/T14049-2008

b. We also can meet IEC, ASTM, SB, DIN and other international stendars.

3. Specification:

Type

Designation

Application

VV

Copper conductor ,PVC insulated ,PVC sheathed power cable

1*50 copper cable is used for laying indoors, in tunnel or cable trench,unable to bear extermal mechanical forces. Single core cable is not permissible to lay in magnetic duct

VLV

Aluminium conductor ,PVC insulated ,PVC sheathed power cable

VY

Copper conductor, PVC insulated, PE sheathed power cable

VLY

Aluminium conductor ,PVC insulated ,PE sheathed power cable

VV22

Copper conductor ,PVC insulated ,steel tape armoured ,PVC sheathed power cable

For laying indoors, in cable trench or direct in ground ,able to bear external mechanical forces, but unable to bear pulling force

VLV22

Aluminium conductor ,PVC insulated ,steel tape armoured ,PVC sheathed power cable

VV23

Copper conductor ,PVC insualted ,steel tape armoured ,PE sheathed power cable

VLV23

Alunminium conductor ,PVC insulated ,steel tape armoured ,PE sheathed power cable

VV32

Copper conductor, PVC insulated, steel wire armoured,PVC insulated power cable

 

For laying indoors, in cable or direct in ground ,able to bear external mechanical forces, but unable to bear large pulling forces

VLV32

Aluminium conductor, PVC insulated ,steel tape armoured ,PVC sheathed power cable

VV33

Copper conductor, PVC insulated steel wire armoured , PE sheathed power cable

VLV33

Aluminium conductor , PVC insulated , streel wire armoured ,PE sheathed power cable

Note: The armoured 1*50 copper cable is only used for D.C.system. As for A.C.system,non-magnetic armored material should be applied

4.Nominal Cross-sectional Areas:

1.5 mm2 , 2.5 mm2  ,4 mm2 , 6 mm2 , 10 mm2  , 16 mm2 ,25 mm2  , 35 mm2 , 50 mm2  ,70 mm2  , 95 mm2  ,120 mm2  ,150 mm2 ,185 mm2  ,240 mm2 ,300 mm2  400 mm2 500 mm2 630 mm2 800 mm2 

5. Production Range:

single core cable from 1.5 mm2  to 800 mm2,muli-core cable from 1.5 mm2   to 400 mm2 

6. Operating Characteristics:

-Rated power-frequency voltage u0/u:0.6/1 KV

Max permissible continuous operating temperature of conductor 70

Max short-circuit temperature of the conductor shall not exceed (Max 5 seconds duration): cross-section of conductor  300 mm2 

7. Product Show:

 

8.Packing

 

9. Quality Control 

10.  Factory Production Machines

 

]]> https://www.baoliyy.com/0-6-1-kv-cu-xlpe-pvccxv-1x50mm2-copper-xlpe-cable/feed/ 0 0.6/1KV 3+1 Earth 4 Core 16mm2 25mm2 35mm2 50mm2 70mm2 Electrical XLPE Copper Power Cable https://www.baoliyy.com/0-6-1kv-31-earth-4-core-16mm2-25mm2-35mm2-50mm2-70mm2-electrical-xlpe-copper-power-cable/ https://www.baoliyy.com/0-6-1kv-31-earth-4-core-16mm2-25mm2-35mm2-50mm2-70mm2-electrical-xlpe-copper-power-cable/#respond Mon, 20 Jun 2022 09:00:52 +0000 https://www.baoliyy.com/0-6-1kv-31-earth-4-core-16mm2-25mm2-35mm2-50mm2-70mm2-electrical-xlpe-copper-power-cable/
Product Description

PVC/XLPE power cable is used to transmit and distribute power in power transmission and distribution system of 0.6/1kV or lower.

It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication

in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

 

 TYPE & DESIGNATION OF BARE CONDUCTOR

Rated Voltage; (Uo/U)(Um) 0.6/1kV
Max. working; temperature 70 °c for pvc; insulation and 90 °c for xlpe insulation
Max. temperature; during short circuit (≤5S 160°c (PVC; insulation), 250°c (XLPE insulation)
Conductor class 1 and 2 copper or aluminum
Shape of conductor circular and sectional
Shape of conductor circular and sectional
Sectional area 1.5 – 500mm2
Insulation PVC / XLPE
No. of cores 1,2,3,4,5,6
Armour steel wire or steel tape available
Sheath PVC
Filler Polypropylene lament with lapped binding tape
Core-covering: Binding tape
Min. beding radius 15 times cable radius (single core), 12 times cable radius (multi cores)

 

 
Technical Data

 

Standards: IEC502, IEC332-3

Conductor: Cu or AL

Insulation: PVC (polyvinyl chloride),XLPE(Cross-linked Polyvinyl),PE

Sheath: PVC (polyvinyl chloride)

Sheath Color: Black or Gray (Bespoke cable) 

Bending Radius: 8D ± 0.05

Temperature Rating: 0°C to 70°C 

  

Related Products

Related Products

 

ABC twist cable LV Copper Power Cable Bare Conductor ACSR
Aerial Bundled Cable with IEC60520 Standard 0.6/1kV overhead aerial bundled cable Low Voltage Armored Power Cable

 

Packaging & Shipping

 

Certifications

 

FAQ

  1. Q: Is your company a factory or trading company?

    A: We are factory with our own trading company. Our trade business expands home and abroad.

  2. Q:When can I get the price?

    A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

  3. Q:How can I get a sample to check your quality?

    A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

  4. Q: What is Minimum Order Quantity?

    A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

  5. Q: Which standards for your products?

    A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

  6. Q: How about delivery time?

    A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

  7. Q: Payment terms:

    A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

  8. Q: What is your packing?

    A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

 

]]> https://www.baoliyy.com/0-6-1kv-31-earth-4-core-16mm2-25mm2-35mm2-50mm2-70mm2-electrical-xlpe-copper-power-cable/feed/ 0 Good quality 600V abc cable 50mm2 70mm2 35mm2 xlpe cable https://www.baoliyy.com/good-quality-600v-abc-cable-50mm2-70mm2-35mm2-xlpe-cable/ https://www.baoliyy.com/good-quality-600v-abc-cable-50mm2-70mm2-35mm2-xlpe-cable/#respond Fri, 08 May 2020 05:45:34 +0000 https://www.baoliyy.com/good-quality-600v-abc-cable-50mm2-70mm2-35mm2-xlpe-cable/

Good quality  600V  abc cable 50mm2  70mm2  35mm2  xlpe cable

Product Description

Our company founded in 2008, with own factory, have more business experience.

 

 

Ⅰ Applications

Primarily used for overhead service application such as street lighting,outdoor lighting,and temporary service for construction, To be used at voltage of 600V to 2200V phase-to-phase or less at conductor temperatures not to exceed 75°C for polyethylene insulated conductors or 90°C for cross liked polyethylene insulated conductors.

Ⅱ Standards

We could produce the cable according to many standards: ICEA S-76-474,

 ICEA S-95-658,ICEA S-61-402,ICEA S-66-524.NFC 33. IEC

we will do our best to meet your requirements

ⅢSpecification

1. Phase conductor: Aluminum wire, 1350-H19

2. Neutral Conductor : Aluminum wire 1350-H19, All Alloy Aluminum Conductor 6201, Aluminum Conductor Steel Reinforced

3. The material of insulation: XLPE,PE,PVC

4. The Voltage: 600V-2200V

Packaging & Shipping

1) Packing length:100 to 1,000m reeled in carton drum or according to customers' requirement.

2) Outer packing: wooden case, carton box.
3) Other packing requirement according to client's request.

 

Our factory

Factory overview

Workshop

Test lab.

 

Customer

 

certificate 1

 

]]> https://www.baoliyy.com/good-quality-600v-abc-cable-50mm2-70mm2-35mm2-xlpe-cable/feed/ 0 50mm2 Aluminum cable service drop cable power cable manufacturers https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers-3/ https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers-3/#respond Fri, 08 May 2020 05:38:55 +0000 https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers-3/
Product Description

 

DESCRIPCION Cable electrico formado por un conjunto de varios conductores de aluminio grado electrico, cableados compactos, cada uno con aislamiento de un compuesto especial de polietileno reticulado (XLPE) resistente a la intemperie, trenzados alrededor de un elemento portante formado por una cuerda de aleacion de aluminio con o sin aislamiento de XLPE que cumple tambien la funcion de conductor neutro. El conjunto puede incorporar también uno o mas conductores aislados adicionales para alumbrado publico.

 

IDENTIFICACION DE CONDUCTORES Cada conductor de fase se identifica con marcas extruidas sobre el aislante (1 marca para fase 1, 2 marcas para fase 2 y 3 marcas para fase 3). Cuando se solicite 2 conductores adicionales de igual seccion uno de ellos se identifica con 4 marcas.

 

APLICACION Los cables Autoportantes Multi-Conductores de Aluminio, CAAI, se emplean para redes aereas de distribucion de energía electrica de bajo costo, en zonas urbanas y rurales. Se instalan tanto en postes como adosados a muros, en ambos casos, con los debidos accesorios. No requieren el uso de aisladores.

 

VOLTAJE Adecuados para sistemas de distribucion de 110, 220, 380 y 440 voltios.

 

TEMPERATURA DE OPERACION 90º C en el conductor. ESPECIFICACIONES TECNICAS • NTP 370.254 • ASTM B399-04 PRECAUCIONES ESPECIALES Se recomienda no emplear estos cables en zonas de ambiente salino o contaminado, dada la escasa resistencia a la corrosión del aluminio. Las derivaciones y conexiones con cables de cobre deben hacerse mediante el empleo de tecnicas adecuadas. Durante las labores de instalacion debe cuidarse de no danar la superficie del cable. DATOS PARA EL PEDIDO
Solicitar cable tipo CAAI; numero de conductores de fase y seccion de los mismos; numero de conductores para alumbrado y su seccion; sección del elemento neutro portante.  

 

 

CARACTERISTICAS DIMENSIONALES Y ELECTRICAS

 

Espes.

Seccion

Diametro

 

Resistencia

Reactancia

Factor de Caida

 

Aislam.

Neutro

Nominal

 

Ohmica

Inductiva

de Tension **

Formacion

Fase

Portante

Exterior

Peso

(Ohm/Km a 20°C)

(Ohm/Km a 60Hz)

(V/A.Km)

 

(mm)

(mm2)

(mm)

(Kg/Km)

Fase

Alumbdo

Fase

Alumbdo

Fase

Alumbdo

1 x 16 + ND25 mm2

1,14

25

20,0

130

1,910

 

0,099

 

3,492

…

2 x 16 + ND25 mm2

1,14

25

20,0

192

1,910

 

0,100

 

3,492

 

3×35+16+NA35 mm2

1,14

35

28,5

550

0,868

1,910

0,106

0,135

1,650

3,529

3×50+16+NA35 mm2

1,52

35

32,0

701

0,641

1,910

0,102

0,143

1,243

3,538

3×50+25+NA35 mm2

1,52

35

32,0

731

0,641

1,200

0,104

0,127

1,245

2,261

3×70+25+NA50 mm2

1,52

50

38,0

970

0,443

1,200

0,100

0,137

0,890

2,272

 

Packaging & Shipping

 

Equipment

 

Our Services

 

Team

 OUR PRODUCT LINE: 

 

 

]]> https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers-3/feed/ 0 50mm2 Aluminum cable service drop cable power cable manufacturers https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers-2/ https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers-2/#respond Thu, 12 Dec 2019 07:28:29 +0000 https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers-2/
Product Description

 

DESCRIPCION Cable electrico formado por un conjunto de varios conductores de aluminio grado electrico, cableados compactos, cada uno con aislamiento de un compuesto especial de polietileno reticulado (XLPE) resistente a la intemperie, trenzados alrededor de un elemento portante formado por una cuerda de aleacion de aluminio con o sin aislamiento de XLPE que cumple tambien la funcion de conductor neutro. El conjunto puede incorporar también uno o mas conductores aislados adicionales para alumbrado publico.

 

IDENTIFICACION DE CONDUCTORES Cada conductor de fase se identifica con marcas extruidas sobre el aislante (1 marca para fase 1, 2 marcas para fase 2 y 3 marcas para fase 3). Cuando se solicite 2 conductores adicionales de igual seccion uno de ellos se identifica con 4 marcas.

 

APLICACION Los cables Autoportantes Multi-Conductores de Aluminio, CAAI, se emplean para redes aereas de distribucion de energía electrica de bajo costo, en zonas urbanas y rurales. Se instalan tanto en postes como adosados a muros, en ambos casos, con los debidos accesorios. No requieren el uso de aisladores.

 

VOLTAJE Adecuados para sistemas de distribucion de 110, 220, 380 y 440 voltios.

 

TEMPERATURA DE OPERACION 90º C en el conductor. ESPECIFICACIONES TECNICAS • NTP 370.254 • ASTM B399-04 PRECAUCIONES ESPECIALES Se recomienda no emplear estos cables en zonas de ambiente salino o contaminado, dada la escasa resistencia a la corrosión del aluminio. Las derivaciones y conexiones con cables de cobre deben hacerse mediante el empleo de tecnicas adecuadas. Durante las labores de instalacion debe cuidarse de no danar la superficie del cable. DATOS PARA EL PEDIDO
Solicitar cable tipo CAAI; numero de conductores de fase y seccion de los mismos; numero de conductores para alumbrado y su seccion; sección del elemento neutro portante.  

 

 

CARACTERISTICAS DIMENSIONALES Y ELECTRICAS

 

Espes.

Seccion

Diametro

 

Resistencia

Reactancia

Factor de Caida

 

Aislam.

Neutro

Nominal

 

Ohmica

Inductiva

de Tension **

Formacion

Fase

Portante

Exterior

Peso

(Ohm/Km a 20°C)

(Ohm/Km a 60Hz)

(V/A.Km)

 

(mm)

(mm2)

(mm)

(Kg/Km)

Fase

Alumbdo

Fase

Alumbdo

Fase

Alumbdo

1 x 16 + ND25 mm2

1,14

25

20,0

130

1,910

 

0,099

 

3,492

…

2 x 16 + ND25 mm2

1,14

25

20,0

192

1,910

 

0,100

 

3,492

 

3×35+16+NA35 mm2

1,14

35

28,5

550

0,868

1,910

0,106

0,135

1,650

3,529

3×50+16+NA35 mm2

1,52

35

32,0

701

0,641

1,910

0,102

0,143

1,243

3,538

3×50+25+NA35 mm2

1,52

35

32,0

731

0,641

1,200

0,104

0,127

1,245

2,261

3×70+25+NA50 mm2

1,52

50

38,0

970

0,443

1,200

0,100

0,137

0,890

2,272

 

Packaging & Shipping

 

Equipment

 

Our Services

 

Team

 OUR PRODUCT LINE:

 

 

 

]]> https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers-2/feed/ 0 50mm2 Aluminum cable service drop cable power cable manufacturers https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers/ https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers/#respond Thu, 12 Sep 2019 06:58:32 +0000 https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers/
Product Description

1~5 cores ABC cable , quadruplex service drop with free sample

DESCRIPCION Cable electrico formado por un conjunto de varios conductores de aluminio grado electrico, cableados compactos, cada uno con aislamiento de un compuesto especial de polietileno reticulado (XLPE) resistente a la intemperie, trenzados alrededor de un elemento portante formado por una cuerda de aleacion de aluminio con o sin aislamiento de XLPE que cumple tambien la funcion de conductor neutro. El conjunto puede incorporar también uno o mas conductores aislados adicionales para alumbrado publico.

 

IDENTIFICACION DE CONDUCTORES Cada conductor de fase se identifica con marcas extruidas sobre el aislante (1 marca para fase 1, 2 marcas para fase 2 y 3 marcas para fase 3). Cuando se solicite 2 conductores adicionales de igual seccion uno de ellos se identifica con 4 marcas.

 

APLICACION Los cables Autoportantes Multi-Conductores de Aluminio, CAAI, se emplean para redes aereas de distribucion de energía electrica de bajo costo, en zonas urbanas y rurales. Se instalan tanto en postes como adosados a muros, en ambos casos, con los debidos accesorios. No requieren el uso de aisladores.

 

VOLTAJE Adecuados para sistemas de distribucion de 110, 220, 380 y 440 voltios.

 

TEMPERATURA DE OPERACION 90º C en el conductor. ESPECIFICACIONES TECNICAS • NTP 370.254 • ASTM B399-04 PRECAUCIONES ESPECIALES Se recomienda no emplear estos cables en zonas de ambiente salino o contaminado, dada la escasa resistencia a la corrosión del aluminio. Las derivaciones y conexiones con cables de cobre deben hacerse mediante el empleo de tecnicas adecuadas. Durante las labores de instalacion debe cuidarse de no danar la superficie del cable. DATOS PARA EL PEDIDO
Solicitar cable tipo CAAI; numero de conductores de fase y seccion de los mismos; numero de conductores para alumbrado y su seccion; sección del elemento neutro portante.  

 

 

CARACTERISTICAS DIMENSIONALES Y ELECTRICAS

 

Espes.

Seccion

Diametro

 

Resistencia

Reactancia

Factor de Caida

 

Aislam.

Neutro

Nominal

 

Ohmica

Inductiva

de Tension **

Formacion

Fase

Portante

Exterior

Peso

(Ohm/Km a 20°C)

(Ohm/Km a 60Hz)

(V/A.Km)

 

(mm)

(mm2)

(mm)

(Kg/Km)

Fase

Alumbdo

Fase

Alumbdo

Fase

Alumbdo

1 x 16 + ND25 mm2

1,14

25

20,0

130

1,910

 

0,099

 

3,492

…

2 x 16 + ND25 mm2

1,14

25

20,0

192

1,910

 

0,100

 

3,492

 

3×35+16+NA35 mm2

1,14

35

28,5

550

0,868

1,910

0,106

0,135

1,650

3,529

3×50+16+NA35 mm2

1,52

35

32,0

701

0,641

1,910

0,102

0,143

1,243

3,538

3×50+25+NA35 mm2

1,52

35

32,0

731

0,641

1,200

0,104

0,127

1,245

2,261

3×70+25+NA50 mm2

1,52

50

38,0

970

0,443

1,200

0,100

0,137

0,890

2,272

 

 

Packaging & Shipping

 

Company Information

 

Equipment

 

Team

 OUR PRODUCT LINE: 

 

 

 

 

 

 

 

 

 

 

]]> https://www.baoliyy.com/50mm2-aluminum-cable-service-drop-cable-power-cable-manufacturers/feed/ 0 50mm2 70mm2 95mm2 33kv aluminum xlpe armored cable 3 core electrical wire cables https://www.baoliyy.com/50mm2-70mm2-95mm2-33kv-aluminum-xlpe-armored-cable-3-core-electrical-wire-cables/ https://www.baoliyy.com/50mm2-70mm2-95mm2-33kv-aluminum-xlpe-armored-cable-3-core-electrical-wire-cables/#respond Tue, 27 Aug 2019 18:16:24 +0000 https://www.baoliyy.com/50mm2-70mm2-95mm2-33kv-aluminum-xlpe-armored-cable-3-core-electrical-wire-cables/

11kv 15kv 20kv N2axsfy copper xlpe electric power cable underground high voltage power cable

TOP TEN CABLE MANUFACTURER/EXPORTER IN CHINA
LARGEST CABLE MANUFACTUER IN NORTH CHINA
ANNUAL EXPORT VOLUME EXCEED 200MILLION USD
WITH UL,TUV,KEMA,CE,BV,PSB,SABS,LLOYD'S,GL,NK,KR,ABS PRODUCTS CERTIFICATIONS
WITH TUV TYPE TESTING REPORT
WIDE PRODUCTS RANGE
ISO9001,ISO18001,OHSAS18001 SYSTEM CERTIFICATIONS
CNAS APPROVAL LABROTARY

 

 

Standard:IEC60502, BS6346, VDE, AS/NZS, UL,etc

The Rated Voltage(kv):

 1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35 
2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 – 26/35

 Number of cores:

  1, 2, 3, 3+1, 3+2, 3+3, 4, 4+1, 4+2, 5   low votage

  1 or 3 core                                           medium voltage

 Construction:

 Conductor: Solid or stranded copper/aluminum

 Insulation: Cross-linked polyethylene (XLPE) 

Filler: Polypropylene filament with lapped binding tape 
Binder: Binding tape 
Inner sheath: Polyvinyl chloride (PVC) 
Amour: Galvanized steel wire armored(SWA) or steel tape armored(STA) 
Sheath: Polyvinyl chloride (PVC) 

 

Sectional Area: 

1.5 mm2 , 2.5 mm2  ,4 mm2 , 6 mm2 , 10 mm2  , 16 mm2 ,25 mm2  , 35 mm2 , 50 mm2  ,70 mm2  , 95 mm2  ,120 mm2  ,150 mm2 ,185 mm2  ,240 mm2 ,300 mm2  400 mm2 500 mm2 630 mm2 800 mm2 

production range: single core cable from 1.5 mm2  to 800 mm2,muli-core cable from 1.5 mm2   to 400 mm2

 

Type and Name: 

Model Name Application Cable Cores Section area (mm)
Copper    Core Aluminum Core
YJV YJLV CU/AL Conductor, XLPE Insulated, PVC Sheathed Power Cable XLPE insulation PVC/PE sheathed power cables are used for laying indoors and outdoors. Able to bear certain traction during installation, but not external mechanical forces and pulling forces. Single core cable can't laying in magnetic ducts . 1C
3C

25

 |

 400
YJY YJLY CU/AL Conductor, XLPE Insulated, PE Sheathed Power Cable
YJV22 YJLV22 CU/AL Conductor, XLPE Insulated,Steel-Tape Armored,PVC Sheathed Power Cable XLPE insulation PVC/PE sheathed steel-tape armored power cables can be buried directly .Able to bear external mechanical forces but large pulling forces.
YJV23 YJLV23 CU/AL Conductor, XLPE Insulated,Steel-Tape Armored,PVC Sheathed Power Cable
YJV32 YJLV32 CU/AL Conductor, XLPE Insulated,Thin Steel-Wire Armored,PVC Sheathed Power Cable XLPE insulation armoured power cables can apply to shafts,water and soil. Able to bear moderate pulling forces.
YJV33 YJLV33 CU/AL Conductor, XLPE Insulated,Thin Steel-Wire Armored,PE Sheathed Power Cable
YJV42 YJLV42 CU/AL Conductor, XLPE Insulated,Thick Steel-Wire Armored,PVC Sheathed Power Cable Steel-wire armored,PVC/PE Sheathed Power Cables are apply to shafts,water and soil.Able to bear large pulling forces.
YJV43 YJLV43 CU/AL Conductor, XLPE Insulated,Thick Steel-Wire Armored,PE Sheathed Power Cable

 

 

Packaging & Shipping

 

UL certificate

We are one of China top rank cable&wire manufacturer.Our products meet standards of GB, IEC DIN ASTM, JIS, NF, AS/NZS CSA GOST and so on. We also  have obtained ISO9001,ISO14001,OHSAS18001, UL,CE,

KEMA, TUV, SABS,PBS,Bureau Veritas, Lloyd,GL,NK,KR certifications.

 

We have obtained UL certifications for TC cable, DLO cable,RHH/RHW/RHW-2,XHHW/XHHW-2/SIS, THHN,SER/SEU/USE, MV-90/MV-105,MC cable,AC cable,TECK 90,SOOW,Welding cable,Mining cable,type DG,PV cable,Shipboard cable  and so on.

 

 

Company Information
Hebei Huatong Wires and Cables Group Co., Ltd was established in 1993, covering an area of  230, 000 square meters. We own more than 420 sets manufacturing equipment and  250 sets of testing equipment or apparatus. Our annual production capacity is 5 billion Yuan.We have 1200 employers, among which 150  are technicians. Based on the scientific management, now we are a comprehensive, large-scale enterprises in wire and cable industry.Voltage up to 35KV, including X L P E power cables,PVC power cables, mining cables, rubber cables for general purpose, Submersible oil pump cables, solar cables, shipboard cables,lead sheath cables, aerial cables, control and instrument cables, special cables etc.Products are exported to USA, Australia, Singapore, Europe, South America, Middle East, Asia, Africa. CNAS accredited national level laboratory.

 

Laboratory

CNAS accredited national level laboratory.

  

Our Services

1.25 years production experience and 16 years export experience .
2.Products certification :UL,CE,BV,TUV,KEMA,PSB,SABS,ABS,NK,LR,KR,GL etc
3. OEM service available based on official & legal authorization.
4.Strict quality control system.
5.Rapid delivery and feedback  Faster lead time than our competitors.
6.Excellent quality with reasonable price.
7.Strong technical support (technical data, drawing, etc.)
8.Professional teamwork service for you actively.
9.Stock available, Free sample is available.

FAQ

(1).When can I get the price?
We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your e-mail so that we will regard your inquiry priority.

(2).How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

(3).How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express  account or prepay us if you do not have an account.

(4).What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.

]]> https://www.baoliyy.com/50mm2-70mm2-95mm2-33kv-aluminum-xlpe-armored-cable-3-core-electrical-wire-cables/feed/ 0