4 core copper cable – JYTOP Cable

Made in China 4 Core (3 x 70mm+35mm). Un-Armored, Copper Conductors, XLPE,Voltage Rating:600/1000V

admin — Tue, 21 Jun 2022 01:03:38 +0000

Made in China 4 Core (3 x 70mm+35mm). Un-Armored,

Copper Conductors, XLPE,Voltage Rating:600/1000V

We welcome you to visit our plant .

All the costs in China will be in charge of us.

Any question, pls feel free to contact me

Skype: hongliangcablesales8

jessie(at)hldlcable.com

Products Show :

Products Introduction for multi cores copper conductor flame retardant electrical cable
PVC insulation Power Cable 0.6/1 kV (without armour)
Type	NYY, VV, VLV, Cu/PVC/PVC, Al/PVC/PVC
Voltage	0.6/1 kV
Cores	1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E
Range of Nominal cross section	1.5 mm² – 630 mm²
multi cores electrical cable Application	It applies to electrical power transmission and distribution lines with AC rated voltage U₀/U up to and including 0.6/1 kV. For outdoor and indoor installation in damp and wet locations, laid directly in the ground (when well protect in ducts, in trenches and in steel support brackets. )
Standard	IEC 60502, BS 7870, GB/T12706
Constructions	Conductor:	Class 1/2 annealed bare copper solid or strands
	Insulation:	PVC
	Sheath:	PVC or PE
Max. Operating Temperature	70 ℃, can be 90 ℃ and 110 ℃ as per requirement
Packing	Wooden drum or as per requirement
Production Capacity	30 kilometer / day
MOQ	1000 meters for small size, 500 meters for big size.
Delivery time	10 -15 working days
Remark	The cable can be of flame retardance, fire resistance, environment friendly or other property

xlpe/pvc cable 4mm2 copper conductor 4 core power cable

admin — Tue, 21 Jun 2022 00:59:54 +0000

xlpe/pvc cable 4mm2 copper conductor 4 core power cable

Product Description

Picture for xlpe/pvc cable 4mm2 copper conductor 4 core power cable

PVC power cables (plastic power cable) is one of high quality products of our company. The product not only has good electric capability, but also has good chemical stabilization, simple structure, easy to use, and the laying of cable do not be limited by the fall. It is widely used at the transformer circuit which rated voltage is 600V or under.

The product can be produced against the standard of IEC60502 and IEC60331, BS 6346, DIN VDE 0271, and the standard required by the clients.

1. The long-term permissible operation temperature of the conductor shall not be higher than 70

2. The max temperature of the conductor of cable should less than 160 when short circuit. (less than 5 second)

3. The cable is not limited by drop in level when being laid, and the environment temperature shall not be lower than 0

4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents, and flame retardant.

5. Light weight, perfect bending properties, installed and maintained easily and conveniently

Specifications for xlpe/pvc cable 4mm2 copper conductor 4 core power cable

Type	VV22, VLV22, Cu/PVC/STA/PVC, Al/PVC/STA/PVC
Voltage	0.6/1 kV
Cores	1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E
Range of Nominal cross section	1.5 mm2 ~ 630 mm2
Standard	IEC 60502, BS 7870, GB/T12706
Constructions	Conductor:	Class 1/2 annealed bare copper solid or strands
	Insulation:	PVC
	Armour:	STA (Remark: for single core the armour should be ATA or SSTA)
	Sheath:	PVC or PE
Max. Operating Temperature	70 ℃, can be 90 ℃ and 110 ℃ as per requirement
Packing	Wooden drum or as per requirement
Production Capacity	30 kilometer / day
MOQ	1000 meters for small size, 500 meters for big size.
Delivery time	10 ~ 15 working days
Remark	The cable can be of flame retardance, fire resistance, environment friendly or other property

Applications for xlpe/pvc cable 4mm2 copper conductor 4 core power cable

It applies to electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1 kV. For outdoor and indoor installation in damp and wet locations, laid directly in the ground where

excessive mechanical stresses are present in sloping and moving terrains and in vertical or inclined laying, as well as in locations susceptible to sliding.

Inspection Quality System for xlpe/pvc cable 4mm2 copper conductor 4 core power cable

Sparker tester,Heating aging Chamber,High resistance machine, Oxygen index equipment, Partial ischarge inspection instruments, Fireproof testing device,High-power voltage withstand tester,No-rotor Vulkameter,Pull tester,Analytical balance,Direct current bridge,Plastic tester,Projector, Punch machine,Cross-linked cutting machine,etc.

Productive Process

0.6/1kV copper conductor 4 core electrical cable

admin — Tue, 21 Jun 2022 00:55:12 +0000

0.6/1kV copper conductor 4 core electrical cable

Product Description

Electrical cable is used for transmit and distribute power in power transmission and distribution system of 35kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry .

Standards of electrical cable

EC60502-1 2004 ISO9001:2008 GB/T12706-2008

Structure of electrical cable

Conductor: Solid or stranded copper
Insulation: Polyvinyl chloride (PVC) or Cross-linked polyethylene (XLPE)
Filler: Polypropylene filament with lapped binding tape
Binder: Binding tape
Inner sheath: Polyvinyl chloride (PVC)
Amour: Galvanized steel wire armored(SWA) or steel tape armored(STA)
Sheath: Polyvinyl chloride (PVC)

No. Of Core and Sectional Area(mm2) :
1 Core :10~630 mm2
2 Core :2×4~2×185 mm2
3 Core :3×4~3×300 mm2
4 Core :4×4~4×400 mm2

3+1 Core :3×4+1×2.5mm2~3×400+1x185mm2
3+2 Core :3×4+2×2.5mm2~3×400+2x185mm2

4+1 Core :4×4+1×2.5mm2~4×400+1x185mm2

Specifiaction for PVC insulated electrical cable

TYPE		Description of Cable	Main Applications
CU core	AL core	Description of Cable	Main Applications
VV	VLV	Copper/Aluminum core,PVC insulated,PVC sheathed electrical cable	Non-armoured PVC cable are suited for laying indoors,In cable trench,On cable racks and in pipes. Unable bear external pressures and tensions.
VV22	VLV22	Copper/Aluminium core,PVC insulated,steel tape armored,PVC sheathed electrical cable	Steel-tape armoured PVC cables are suited for vertical burial.Can bear moderate positive pressures,Unable bear tension forces.
VV32	VLV32	Copper/Aluminum core,PVC insulated,thin steel wire armored,PVC sheathed power cable	Thin steel wire armoured PVC cables are used in case of great difference of levels or vertical installation and Can do vertical burial.Can bear moderate positive pressures and tension forces.
VV42	VLV42	Copper/Aluminum core,PVC insulated,thick steel wire armored,PVC sheathed electrical cable	Thick steel wire armoured PVC cables are suited for vertical installation and can be laid water or sea-bottom.Can bear greater positive pressures and tension forces.

Specification for XLPE electrical cable

Type	Designation	Applications
YJV YJLV	Copper conductor XLPE insulated PVC sheathed power cable Aluminum conductor XLPE insulated PVC sheathed power cable	For laying indoors, in tunnel or cable trench, unable to bear external mechanical forces. Single core cable is not permissible to lay in magnetic duct.
YJV22 YJLV22	Copper conductor, XLPE insulated, steel tape armoured, PVC sheathed power cable Aluminum conductor, XLPE insulated, steel tape armoured, PVC sheathed power cable	For laying indoors, in tunnel, in cable trench or direct in ground, able to bear external mechanical forces, but unable to bear large pulling force.
YJV32 YJLV32	Copper conductor, XLPE insulated, steel wire armoured, PVC sheathed power cable Aluminum conductor, XLPE insulated, steel wire armoured, PVC sheathed power cable	For laying indoors, in tunnel, in cable trench or direct in ground, able to bear external mechanical forces, but unable to bear large pulling force.

If you can't find the product you need in the list, please feel free contact me!!!

Workshop

Certificate

Packaging & Shipping

Packing : Electrical cable should be supplied in steel/wooden drum. Electrical cable piece length should be of 500meter length or as specified by the customer at the time of order.

Shipping : Within working days or as to the buyers' request

FAQ

1. Which payment terms do you accept?

a) 30% DEPOSIT IN ADVINCE, BANLANCE AGAINST THE COPY OF B/L.

b) 100% L/C at sight.

2. What is your MOQ?

You are advised to please confirm it with us directly as based on different cables. Usually it’s 100 meters for medium voltage cables.

3. What about your delivery time?

According to the order’s quantity. Usually is 15 30 working days.

4. How to packing the goods?

Usually in wooden drum or steel wooden drums. The cable wire is usually coiled.

About the supplier

Send Your Inquiry Details in the Below for Free Sample, Click "Send" now!

XLPE Insulated PVC Jacket 4mm 16mm 4 Core SWA Armoured Copper Cable

admin — Tue, 21 Jun 2022 00:55:05 +0000

XLPE Insulated PVC Jacket 4mm 16mm 4 Core SWA Armoured Copper Cable

Product Description

Brief Introduction for 4 Core Armoured Copper Cable

4 Core Armoured Copper Cable is applicable for power transmission through the power line of rated voltage 1kV and below, and it is proper to lay these cables in the fixed places, such as hotels, stations, chemical engineering and oil platforms, mines, power plants, metros, and high buildings, etc.

Construction for 4 Core Armoured Copper Cable

Description of 4 core armored copper cable:

Type	Cu or Al/XLPE/PVC, Cu or Al/XLPE/PVC/SWA/PVC, Cu or Al/XLPE/LSZH, Cu or Al/XLPE/LSZH/SWA/LSZH,
Voltage	0.6/1 kV
Cores	1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E
Range of Nominal cross section	1.5 mm² – 630 mm²
Application	It applies to electrical power transmission and distribution lines with AC rated voltage U₀/U up to and including 0.6/1 kV. For outdoor and indoor installation in damp and wet locations, laid directly in the ground
Standard	IEC 60502, BS 7870, GB/T12706

Product show

Description for 4 core armoured copper cable

Main manufacturing procedure

Packing&shipping

Certificate

About the supplier

Wendy Jiang(Sales Engineer)

SKYPE : hongliangcablesales3

TEL: 008618253153062

WEBSITE: http://sonorouscable.en.alibaba.com/

WELCOME TO INQUIRY !!!!!!

Send Your Inquiry Details in the Below for Free Sample, Click "Send" now!

Factory Supply 4x50mm2 4x70mm2 4X95mm2 4 Core Armoured Copper Power cable

admin — Tue, 21 Jun 2022 00:54:35 +0000

Factory Supply 4x50mm2 4x70mm2 4X95mm2 4 Core Armoured Copper Power Cable

Product Description

Application for 4 Core Cable

Armoured Copper Power cable is used for power transmission and distribution line with voltage rated at 1kV and below.Compared with PVC Insulated Power Cable,xlpe insulated power cable boasts not only characteristic of excellent electricity, mechanism, heat and aging-resistant, environment stress-resistant and chemical corrosionresistant, but also simple structure, light weight, no restriction by laying drop, and high temperature allowance for long term working.

Standard of 4 Core Cable

International: IEC 60502-2

China: GB/T 12706.2-2008

Other standards such as BS,DIN and ICEA upon request

Technical data of 4 Core Cable

Rated voltage: 0.6/1kV, 1.8/3kV, 6/10kV, 8.7/10kV, 8.7/15kV, 12/20kV, 21/35kV, 26/35kV

Maximum Conductor Temperature: under normal (90°C), emergency (130°C) or short circuit no more than 5 s (250°C) conditions.

Min. Ambient Temp. 0°C, after installation and only when cable is in a fixed position

Min. Bending Radius: 20 x cable O.D for single-core non-armoured cables

15 x cable O.D for single-core armoured cables

15 x cable O.D for multi-core non-armoured cables

12 x cable O.D for multi-core armoured cables

Specification for 4 Core Cable

Type	Cu or Al /XLPE/CTS or CWS/PVC, Cu /XLPE/CTS /PVC/SSWA/PVC
Voltage	0.6/1kV
Cores	4 Core
Range of Nominal cross section	2.5 mm² – 630 mm²
Application	Armored copper power cable is suitable for use in power transmission and distribution lines with rated power frequency voltage 3.6/6kV~26/35kV. For laying indoors, in tunnel, cable trench, well or direct in ground.
Standard	IEC 60502, BS 6622, GB/T12706
Constructions	Conductor:	Copper or Aluminium Compacted
	Insulation:	XLPE
	Metallic screen:	Copper tape or Copper wire
	Armour:	Steel Wire Armour or Steel Tape Armour
	Sheath:	PVC, PE or LSZH
Max. Operating Temperature	90 ℃

Picture of 4 Core Cable

Electrical Power Cable 120mm 150mm 240mm xlpe 4 core armoured cable

admin — Mon, 20 Jun 2022 09:51:24 +0000

Product Description

PVC/XLPE power cable is used to transmit and distribute power in power transmission and distribution system of 0.6/1kV or lower.

It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication

in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

TYPE & DESIGNATION OF BARE CONDUCTOR

Rated Voltage; (Uo/U)(Um)	0.6/1kV
Max. working; temperature	70 °c for pvc; insulation and 90 °c for xlpe insulation
Max. temperature; during short circuit (≤5S	160°c (PVC; insulation), 250°c (XLPE insulation)
Conductor	class 1 and 2 copper or aluminum
Shape of conductor	circular and sectional
Shape of conductor	circular and sectional
Sectional area	1.5 – 500mm2
Insulation	PVC / XLPE
No. of cores	1,2,3,4,5,6
Armour	steel wire or steel tape available
Sheath	PVC
Filler	Polypropylene lament with lapped binding tape
Core-covering:	Binding tape
Min. beding radius	15 times cable radius (single core), 12 times cable radius (multi cores)

Technical Data

Standards: IEC502, IEC332-3

Conductor: Cu or AL

Insulation: PVC (polyvinyl chloride),XLPE(Cross-linked Polyvinyl),PE

Sheath: PVC (polyvinyl chloride)

Sheath Color: Black or Gray (Bespoke cable)

Bending Radius: 8D ± 0.05

Temperature Rating: 0°C to 70°C

0.6/1kV 4-core Cu/PVC/ PVC Cable(VV)
Nominal cross sectional area of conductor(mm²)	Approx, overall diameter(mm)
4×4	15.2
4×25	22.2
4×50	28.4
4×70	32.0
4×120	39.7
4×150	44.3
4×240	54.8

Detailed Images

Related Products


ABC twist cable	LV Copper Power Cable	Bare Conductor ACSR

Aerial Bundled Cable with IEC60520 Standard	0.6/1kV overhead aerial bundled cable	Low Voltage Armored Power Cable

Packaging & Shipping

Certifications

FAQ

Q: Is your company a factory or trading company?

A: We are factory with our own trading company. Our trade business expands home and abroad.
Q:When can I get the price?

A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.
Q:How can I get a sample to check your quality?

A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.
Q: What is Minimum Order Quantity?

A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.
Q: Which standards for your products?

A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.
Q: How about delivery time?

A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.
Q: Payment terms:

A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.
Q: What is your packing?

A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

50mm 70mm 95mm150mm 185mm 300mm 400mm Aluminum or Copper Conductor XLPE Insulated Steel Tape Armoured Power Cable

admin — Mon, 20 Jun 2022 09:50:51 +0000

Product Description

PVC/XLPE power cable is used to transmit and distribute power in power transmission and distribution system of 0.6/1kV or lower.

It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication

in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

TYPE & DESIGNATION OF BARE CONDUCTOR

Rated Voltage; (Uo/U)(Um)	0.6/1kV
Max. working; temperature	70 °c for pvc; insulation and 90 °c for xlpe insulation
Max. temperature; during short circuit (≤5S	160°c (PVC; insulation), 250°c (XLPE insulation)
Conductor	class 1 and 2 copper or aluminum
Shape of conductor	circular and sectional
Shape of conductor	circular and sectional
Sectional area	1.5 – 500mm2
Insulation	PVC / XLPE
No. of cores	1,2,3,4,5,6
Armour	steel wire or steel tape available
Sheath	PVC
Filler	Polypropylene lament with lapped binding tape
Core-covering:	Binding tape
Min. beding radius	15 times cable radius (single core), 12 times cable radius (multi cores)

Technical Data

Standards: IEC502, IEC332-3

Conductor: Cu or AL

Insulation: PVC (polyvinyl chloride),XLPE(Cross-linked Polyvinyl),PE

Sheath: PVC (polyvinyl chloride)

Sheath Color: Black or Gray (Bespoke cable)

Bending Radius: 8D ± 0.05

Temperature Rating: 0°C to 70°C

0.6/1kV 4-core Cu/PVC/ PVC Cable(VV)
Nominal cross sectional area of conductor(mm²)	Approx, overall diameter(mm)
4×4	15.2
4×25	22.2
4×50	28.4
4×70	32.0
4×120	39.7
4×150	44.3
4×240	54.8

Detailed Images

Related Products


ABC twist cable	LV Copper Power Cable	Bare Conductor ACSR

Aerial Bundled Cable with IEC60520 Standard	0.6/1kV overhead aerial bundled cable	Low Voltage Armored Power Cable

Packaging & Shipping

Certifications

FAQ

Q: Is your company a factory or trading company?

A: We are factory with our own trading company. Our trade business expands home and abroad.
Q:When can I get the price?

A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.
Q:How can I get a sample to check your quality?

A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.
Q: What is Minimum Order Quantity?

A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.
Q: Which standards for your products?

A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.
Q: How about delivery time?

A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.
Q: Payment terms:

A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.
Q: What is your packing?

A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

awm 2464 cable 22awg 300v Multi-core Single Core 4 Core 0.6/1KV XLPE Copper Cable CU/XLPE/PVC Cable Manufacturer

admin — Mon, 20 Jun 2022 09:45:47 +0000

Multi-core Single Core 4 Core 0.6/1KV XLPE Copper Cable CU/XLPE/PVC Cable Manufacturer

Product Details

Number of Cores & Nominal Cross-section Area

Number of Cores		2	3	3+1	4	3+2	4+1	5
Section Area (mm²)	– 500	2.5 – 500	2.5 – 300	4 – 300	2.5 – 300	2.5 -300	4 – 300	2.5 – 95

about 0.6/1kv power cable style, Plz contact our team. We'll gvie reply ASAP.

0.6/1 KV cable , It to be used for indoors, in tunnel, in down wells,cable furrow or pipe, underground.
Note: the single core armored cables are used for D.C. system only. As for A.C. system, armor layer should be used of non-magnetic material or magnetic isolation measures.

Cable Structure:
1. Conductor:Aluminum
2. PVC insulation
3. Fill layer
4. Around the package tape
5. Inner Sheath
6. Steel tape armor
7. Outer Sheath
8. Mark

Product Description:
–   PVC insulated PVC sheathed power cable (PVC/PVC Cable)
–   PVC insulated steel tape armored PVC sheathed power cable (PVC/STA/PVC Cable)
–   PVC insulated steel wire armored PVC sheathed power cable (PVC/SWA/PVC Cable)
–   Flame retardant PVC insulated PVC sheathed power cable (FR/PVC/PVC Cable)
–   Flame retardant PVC insulated steel tape armored PVC sheathed power cable (FR/PVC/STA/PVC Cable)
–   Flame retardant PVC insulated steel wire armored PVC sheathed power cable (FR/PVC/SWA/PVC Cable)

Application:

1.steel-tape armored cable is to be laid underground, the cable could bear certain mechanical force.

2.Steel-wire cable is applicable to the well, underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint.

Standard: This product adopts the standards of IEC502 & IEC332-3

Scope of application: This item is applied for the alternating current circuitry with voltage (Uo/U) 0.6/1kV for the power supply.

Working conditions:

1) This maximum working temperature of the conductor is 70°C.

2) During having a short(lasting less than 5 seconds)the maximum temperature of the cable conductor for shall not be above 160°C.

3) Environment temperature should be no lower than 0°C for laying the cable;

4) Bending radius allowance of the cable;

single core cable: no steel tape cable 20D: steel tape cable 15D.

3 core cable: no steel tape cable 15D; steel tape cable 12D.

Notes: D practical external diameter of cable

Low Voltage Aluminium XLPE PVC Power Cable for Construction Dimensions

Single core ( aluminum wire armoured)	Two cores (Galvanized steel wire armoured)	Three cores (Galvanized steel wire armoured)	Three cores+1 (Galvanized steel wire armoured)	Four cores (Galvanized steel wire armoured)
Nominal Cross Section (mm2)
	2×2.5	3×2.5
1×4	2×4	3×4		4×4
1×6	2×6	3×6		4×6
1×10	2×10	3×10	3×10+1×6	4×10
1×16	2×16	3×16	3×16+1×10	4×16
1×25	2×25	3×25	3×25+1×16	4×25
1×35	2×35	3×35	3×35+1×16	4×35
1×50	2×50	3×50	3×50+1×25	4×50
1×70	2×70	3×75	3×70+1×35	4×75
1×95	2×95	3×95	3×95+1×50	4×95
1×120	2×120	3×120	3×120+1×70	4×120
1×150	2×150	3×150	3×150+1×70	4×150
1×185	2×185	3×185	3×185+1×95	4×185
1×240	2×240	3×240	3×240+1×120	4×240
1×300	2×300	3×300	3×300+1×150	4×300
1×400	2×400	3×400	3×400+1×185	4×400
1×500		3×500	3×500+1×240	4×500
1×630

Certifications

Workshops

Our Services

1.Sufficient support for our tendering representatives.
2.OEM service available based on official & legal authorization.
3.Strict quality control system.
4.Faster lead time than our competitors.
5.Excellent quality with reasonable price.
6.Strong technical support (technical data, drawing, etc.)
7.Cable solutions to your particular requirements.
8.Free sample is available with economic express fee.
9.12 months quality guarantee after delivery.

Related Products


Control cable	MV ABCCable	Bare Conductor AAAC

MV Cable with IEC60520 Standard	0.6/1kV underground power cable	Flat Cable

Contact detail

high quality Low Voltage XLPE Insulation Power Cable 4 Core Copper Cable

admin — Mon, 20 Jun 2022 09:26:23 +0000

high quality Low Voltage XLPE Insulation Power Cable 4 Core Copper Cable

Product Description

high quality Low Voltage XLPE Insulation Power Cable 4 Core Copper Cable

These single core XLPE cables are designed for distribution of electrical power with nominal voltage 290/500kV. They are suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switchboards and power stations.

Standard of high voltage cable

IEC 62067

CONSTRUCTION of xlpe cable

Conductor of 500kv xlpe cable

The cable conductors can be made of copper or aluminium, depending on customer’s preference or current carrying capacity. Large size solid conductors are made of aluminium. Available constructions including: round solid conductors up to 2000mm² (RE); circular stranded compacted conductors up to 1200mm² (RM); circular conductors with shaped wires up to 2000mm² (RM, Keystone conductors); segmental conductors up to 2500 mm² (RMS, Milliken conductors); oval shaped stranded compacted conductors up to 800mm² for external gas pressure cables (OM).

Conductor Screen of xlpe cable

Extruded layer of semi-conducting cross-linkable compound is applied over the conductor and shall cover the surface completely.

Insulation of xlpe cable

Insulation is of cross-linked polyethylene compound XLPE.
Insulaton Screen of 500kv xlpe cable

Extruded layer of semi-conducting cross-linkable compound is applied over the insulation.

Metallic Layer of 500kv cable

The metallic layer may be applied over the core assembly collectively. The metallic screen shall consist of either copper tapes or a concentric layer of copper wires or a combination of tapes and wires.
Separation Sheath of 500kv xlpe cable

Aluminum Tape sheath
Outer Sheath of xlpe cable

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

4X16mm 4X35mm 4X50mm 4X70mm Electric Low Voltage Steel Wire Armored Cable 4 core SWA Cable

admin — Mon, 20 Jun 2022 09:24:49 +0000

Product Description

PVC/XLPE power cable is used to transmit and distribute power in power transmission and distribution system of 0.6/1kV or lower.

It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication

in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

TYPE & DESIGNATION OF BARE CONDUCTOR

Rated Voltage; (Uo/U)(Um)	0.6/1kV
Max. working; temperature	70 °c for pvc; insulation and 90 °c for xlpe insulation
Max. temperature; during short circuit (≤5S	160°c (PVC; insulation), 250°c (XLPE insulation)
Conductor	class 1 and 2 copper or aluminum
Shape of conductor	circular and sectional
Shape of conductor	circular and sectional
Sectional area	1.5 – 500mm2
Insulation	PVC / XLPE
No. of cores	1,2,3,4,5,6
Armour	steel wire or steel tape available
Sheath	PVC
Filler	Polypropylene lament with lapped binding tape
Core-covering:	Binding tape
Min. beding radius	15 times cable radius (single core), 12 times cable radius (multi cores)

Technical Data

Standards: IEC502, IEC332-3

Conductor: Cu or AL

Insulation: PVC (polyvinyl chloride),XLPE(Cross-linked Polyvinyl),PE

Sheath: PVC (polyvinyl chloride)

Sheath Color: Black or Gray (Bespoke cable)

Bending Radius: 8D ± 0.05

Temperature Rating: 0°C to 70°C

0.6/1kV 4-core Cu/PVC/ PVC Cable(VV)
Nominal cross sectional area of conductor(mm²)	Approx, overall diameter(mm)
4×4	15.2
4×25	22.2
4×50	28.4
4×70	32.0
4×120	39.7
4×150	44.3
4×240	54.8

Detailed Images

Related Products


ABC twist cable	LV Copper Power Cable	Bare Conductor ACSR

Aerial Bundled Cable with IEC60520 Standard	0.6/1kV overhead aerial bundled cable	Low Voltage Armored Power Cable

Packaging & Shipping

Certifications

FAQ

Q: Is your company a factory or trading company?

A: We are factory with our own trading company. Our trade business expands home and abroad.
Q:When can I get the price?

A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.
Q:How can I get a sample to check your quality?

A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.
Q: What is Minimum Order Quantity?

A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.
Q: Which standards for your products?

A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.
Q: How about delivery time?

A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.
Q: Payment terms:

A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.
Q: What is your packing?

A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

4 core copper cable – JYTOP Cable

Made in China 4 Core (3 x 70mm+35mm). Un-Armored, Copper Conductors, XLPE,Voltage Rating:600/1000V

xlpe/pvc cable 4mm2 copper conductor 4 core power cable

0.6/1kV copper conductor 4 core electrical cable

XLPE Insulated PVC Jacket 4mm 16mm 4 Core SWA Armoured Copper Cable

Factory Supply 4x50mm2 4x70mm2 4X95mm2 4 Core Armoured Copper Power cable

Electrical Power Cable 120mm 150mm 240mm xlpe 4 core armoured cable

Related Products

50mm 70mm 95mm150mm 185mm 300mm 400mm Aluminum or Copper Conductor XLPE Insulated Steel Tape Armoured Power Cable

Related Products

awm 2464 cable 22awg 300v Multi-core Single Core 4 Core 0.6/1KV XLPE Copper Cable CU/XLPE/PVC Cable Manufacturer

Low Voltage Aluminium XLPE PVC Power Cable for Construction Dimensions

Single core

( aluminum wire armoured)

Two cores

(Galvanized steel wire armoured)

Three cores

(Galvanized steel wire armoured)

Three cores+1

(Galvanized steel wire armoured)

Four cores

(Galvanized steel wire armoured)

Related Products

high quality Low Voltage XLPE Insulation Power Cable 4 Core Copper Cable

Q: Are you trading company or manufacturer ?

Q: How long is your delivery time?

Q: Do you provide samples ? is it free or extra ?

Q: What is your terms of payment ?

4X16mm 4X35mm 4X50mm 4X70mm Electric Low Voltage Steel Wire Armored Cable 4 core SWA Cable

Related Products