6.6/11kV Cu/XLPE/SWA/PVC Cable 3x95mm2 3 Core Armoured Power Cable

admin — Tue, 21 Jun 2022 00:54:53 +0000

6.6/11kV Cu/XLPE/SWA/PVC Cable 3x95mm2 3 Core Armoured Power Cable

Product Description

Brief Introduction for Power Cable

6.6/11kV Cu/XLPE/SWA/PVC Cable 3x95mm2 3 Core Power Cable is applicable for power transmission through the power line of rated voltage 35kV and below, and it is proper to lay these cables in the fixed places, such as hotels, stations, chemical engineering and oil platforms, mines, power plants, metros, and high buildings, etc.

Producr range of 6.6/11kV Cu/XLPE/SWA/PVC Cable 3x95mm2 3 Core Power Cable

1. Rated voltage: Uo/U:3.6/6kV, 6/10kV(11kV), 12/20kV(24kV), 19/33kV, 26/35kV(35kV).

2. No. of core: Single core or three cores.

3. The highest allowed operating temperature of conductor for long-term working is 90oC. In short-circuit (Max. long-term is no more than 5 seconds). The highest temperature for conductor is no more than 250℃.

4. D.C. resistance of the conductor complies with the stipulations of 3.6/6kV, 6/10kV(11kV), 12/20kV(24kV), 19/33kV, 26/35kV(35kV).

5. The environment temperature should be no lower than 0oC when lay. Otherwise it should be preheated.

6. The cable is laid without horizontal drop limit.

7. Working Frequency Voltage Test: 3.5Uo/5min without puncture.

8. Partial Discharge Test: The discharge volume should be no more than 10pC under 1.73Uo for the cable.

9. Minimum Bending Radius

Single core – Fixed: 15 x overall diameter

Three core – Fixed: 12 x overall diameter

(Single core 12 x overall diameter and 3 core 10 x overall diameter where bands are positioned adjacent to joint or terminations provided that the bending is carefully controlled by the use of a former)

Note:The single core armoured cables are used for D.C. system only. If used for A.C. system, the magnetic isolation should be applied on the steel armoire wires of non-magnetical materials should be used.

Structure of 3 core power cable

Type		Rated Voltage kV
	1.8/3 1.9/3.3	3.6/6	6/6 6/10 6.35/11	8.7/10 8.7/15	12/20 12.7/22	18/30 19/33	21/35	26/35
	Nominal cross-section of conductor mm2
1,Cu/XLPE/PVC 2,Cu/XLPE/LSZH 3,Al/XLPE/PVC 4,Al/XLPE/LSZH	1	25-800	25-800	25-800	25-800	35-800	50-800	50-800	50-800

	3	25-500	25-500	25-500	25-500	35-500	50-400	50-400	50-400

1,Cu/XLPE/PVC/STA/PVC 2,Cu/XLPE/PVC/ATA/PVC 3,Cu/XLPE/LSZH/STA/LSZH 4,Cu/XLPE/LSZH/ATA/LSZH 5,Al/XLPE/PVC/STA/PVC 6,Al/XLPE/PVC/ATA/PVC 7,Al/XLPE/LSZH/STA/LSZH 8,Al/XLPE/LSZH/ATA/LSZH	1	25-800	25-800	25-800	25-800	35-800	50-800	50-800	50-800


	3	25-500	25-500	25-500	25-500	35-500	50-400	50-400	50-400


1,Cu/XLPE/PVC/SWA/PVC 2,Cu/XLPE/PVC/AWA/PVC 3,Cu/XLPE/LSZH/SWA/LSZH 4,Cu/XLPE/LSZH/AWA/LSZH 5,Al/XLPE/PVC/SWA/PVC 6,Al/XLPE/PVC/AWA/PVC 7,Al/XLPE/LSZH/SWA/LSZH 8,Al/XLPE/LSZH/AWA/LSZH	1	25-800	25-800	25-800	25-800	35-800	50-800	50-800	50-800


	3	25-500	25-500	25-500	25-400	35-400	50-400	50-400	50-400

Picture of 6.6/11kV Cu/XLPE/SWA/PVC Cable 3x95mm2 3 Core Power Cable

3 Core Armoured Power Cable – JYTOP Cable

6.6/11kV Cu/XLPE/SWA/PVC Cable 3x95mm2 3 Core Armoured Power Cable