Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

 

 

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

 

Related Products

 

 

 

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

 

 

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

 

Related Products

 

 

 

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

 

 

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor of stranded wires to HD 383

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

 

 

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

 

 

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor or aluminum conductor

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

 

 

 

 

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

 

 

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor or aluminum conductor

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

 

 

 

 

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

 

 

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor or aluminum conductor

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

 

 

 

 

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

 

 

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor or aluminum conductor

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

 

 

 

 

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

 

 

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor or aluminum conductor

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

 

 

 

 

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

 

 

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor or aluminum conductor

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

 

 

 

 

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.

Suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch boards and power stations. Due to the good laying characteristic, this cable can also be installed in difficult in difficult line guide ways.

The inner conducting layer between the conductor and the XLPE insulation and the firmly bonded outer conducting layer on the XLPE insulation assures a construction free of partial discharges with high operational reliabilities.

 

 

TYPE & DESIGNATION OF BARE CONDUCTOR

Circular bare copper-conductor or aluminum conductor

Inner semi-conducting coating

Conductor insulation of cross-linked Polyethylene (XLPE), PE-compound DIX8 to HD 620.1

Outer extrusion of semi-conducting coating spliced with the insulation

Wrapping of conductive material

Shield: Braiding of copper wires with one or two tape(s) applied helically

Wrapping

PVC outer jacket, compound DMV6 to HD 620.1

Jacket color: Red

Related Products

 

 

 

 

1. Q: Is your company a factory or trading company?

   A: We are factory with our own trading company. Our trade business expands home and abroad.

2. Q:When can I get the price?

   A:We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

3. Q:How can I get a sample to check your quality?

   A:After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

4. Q: What is Minimum Order Quantity?

   A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters.

5. Q: Which standards for your products?

   A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement.

6. Q: How about delivery time?

   A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production.

7. Q: Payment terms:

   A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

8. Q: What is your packing?

   A: Our electrical cable is using electrical cable wheel for the packing, the wheel can be all steel, steel frame and fumigated wood, or fumigated wooden cases. We are using different packing for different length of the cable, to ensure there will be no problem during the delivery of the products.