3.6\/6 kV XLPE INSULATED SINGLE -CORE CABLES – JYTOP Cable https://www.baoliyy.com Manufacture AAC/AAAC/ACSR CONDUCTOR,XLPE Cable, PVC Cable, ABC Cable, Power Cable Thu, 05 Sep 2019 11:40:45 +0000 en-US hourly 1 https://wordpress.org/?v=5.2.26 N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES WITH COPPER CONDUCTOR -MEDIUM VOLTAGE CABLES https://www.baoliyy.com/n2xsy-3-6-6-kv-xlpe-insulated-single-core-cables-with-copper-conductor-medium-voltage-cables/ https://www.baoliyy.com/n2xsy-3-6-6-kv-xlpe-insulated-single-core-cables-with-copper-conductor-medium-voltage-cables/#respond Thu, 05 Sep 2019 11:40:45 +0000 https://www.baoliyy.com/n2xsy-3-6-6-kv-xlpe-insulated-single-core-cables-with-copper-conductor-medium-voltage-cables/

N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES WITH COPPER CONDUCTOR -MEDIUM VOLTAGE CABLES

Product Description

1. N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES Use:

The three core cables are designed for distribution of electrical power with nominal voltage Uo/U ranging from 3.6/6.6KV to 19/33KV and frequency 50Hz. They are suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switchboards and power stations.

2. N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES Standards:

  • This product is manufactured according to GB/T12706, equivalent to IEC60502 or BS, DIN, ICEA standard as to customer’s requests.

  • D.C Resistance of the conductor complies with the stipulations of GB/T3956.

  • Flame-retardant properties of the cable comply with Grade A, B and C of GB/T19666-2005, equivalent to IEC60332.

3. N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES Voltage Test and Partial Discharge Test

Nominal /Operating /Test Voltages

Rated Voltage Uo/U Operating Voltage (Um) Testing Voltage (rms)
3.8/6.6KV 7.2KV 15KV
6.35/11KV 12KV 25.5KV
8.7/15KV 17.5KV 35KV
12.7/22KV 24KV 51KV
19/33KV 36KV 76KV

4. N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES structure

Conductor Plain annealed copper or aluminium complying with IEC 60228/BS 6360. Copper conductors shall be stranded (class 2) and aluminium conductors shall be either solid or stranded (class 2).
Conductor Screen Extruded layer of semi-conducting cross-linkable compound is applied over the conductor and shall cover the surface completely. The minimum thickness is 0.3mm and the maximum resistivity shall not exceed 500 Ohm-m at 90°C.
Insulation Insulation is of cross-linked polyethylene compound XLPE (GP8) conforming to BS 7655-1.3 or EPR (GP7), conforming to BS 7655-1.2.
Insulaton Screen Extruded layer of semi-conducting cross-linkable compound is applied over the insulation. The extruded semi-conducting layer shall consist of bonded or cold strippable semi-conducting compound capable of removal for jointing or terminating. As an option, a semi-conducting tape may be applied over the extruded semi-conducting layer as a bedding for the metallic layer. The minimum thickness is 0.3 mm and the maximum resistivity is 500 Ohm-m at 90°C. The screen is tightly fitted to the insulation to exclude all air voids and can be easily hand stripped on site.
Inner Covering & Fillers For cables with a collective metallic layer or cables with a metallic layer over each individual cores with additional collective metallic layers, semi-conducting inner covering and fillers shall be applied over the laid up cores. The inner covering is made of non hygroscopic material, except if the cable is to be made longitudinally watertight. The inner covering shall be extruded or lapped.
Metallic Layer The metallic layer shall be applied over each core or applied as a collective screen. The metallic screen shall consist of either copper tapes or a concentric layer of copper wires or a combination of tapes and wires. The metallic layer provides an earth fault current path, capable of withstanding fault current to earth of 1000A for one second at maximum temperature 160°C. Copper wires are applied over the conducting water blocking layer with a minimum diameter of 0.5mm. And over the copper wires, copper tape with minimum thickness of 0.1mm can be applied helically with overlap.
Separation Sheath (for armoured cable) The separation sheath comprises a layer of extruded PVC, PE or LSZH. The nominal thickness is calculated by 0.02Du + 0.6mm where Du is the fictitious diameter under the sheath in mm. The nominal separation sheath thickness shall not be less than 1.2mm.
Armour (for armoured cable) The armour consists of galvanized steel wire applied over the inner covering with diameter.
Over Sheath Overall sheath comprises a layer of extruded either PVC type 9 conforming to BS 7665-4.2 or MDPE type TS2 conforming to BS 7655-10.1; LSZH can be offered as an option. The over sheath is normally black in colour. When a DC voltage test is to be performed on the over sheath, a semi-conducting layer such as graphite coating shall be applied over the surface of the extruded over sheath. The nominal over sheath thickness is calculated by 0.035+D where D is the diameter immediately under the over sheath in mm. For cables with the over sheath not applied over the armour, the nominal over sheath thickness shall not be less than 1.4mm. And for cables with over sheath applied over the armour, the nominal over sheath thickness shall not be less than 1.8mm.

 

N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES PHYSICAL PROPERTIES

Operating Temperature up to 90°C
Temperature Range -5°C ( PVC or LSZH sheath ); -20°C ( PE sheath )
Short Circuit Temperature 250°C (short circuit duration up to 5 seconds)
Bending Radius 15 x OD

 

5. Product Description for N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES :
N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES Reference Standards: IEC60502-2, IEC 60228, IEC60332 -1/2/3, BS6622, BS7835, VDE0276, AS/NZS 1429.1, GB/T 12706, etc.
Rated Voltage: 6/10kV, 6.35/11kV (12kV), 8.7/15kV, 12/20kV, 18/30kV,19/33kV
Core Number: Single Core or Three Core (1C or 3C)
Available Dimensions: 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.
Codes Available: N2XSY, N2XSEY, NA2XSY, NA2XSEY, N2XSRY, NA2XSRY, N2XSEBY, N2XSEYBY, NA2XSEBY, N2XSERY, NA2XSERY, N2XSEYRGbY, NA2XSEYRGbY, N2XS(F)2Y, NA 2XS(F)2Y, N2XS(FL)2Y, N2XSH, N2XSYRY
YJV, YJLV, YJSV, YJLSV, YJV72, YJLV72, YJSV72, YJLSV72, YJV22, YJLV22, YJSV22, YJLSV22, YJV32, YJLV32, YJSV32, YJLSV32
Application: For power networks, underground, outdoors and in cable ducting. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation.
N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES Construction: 
Conductor: Stranded round compacted copper or aluminum conductor (Cu / Al ), copper wire annealed.
Conductor Screen: Semi-conducting material
Insulation: XLPE (Cross-Linked Polyethylene)
Insulation Screen: Semi-conducting material
Metallic Screen: Copper tape screen or copper wire screen (CTS / CWS )
Filler: PP rope
Separator: Binding tape
Bedding: PVC (Polyvinyl Chloride)
Armouring: Single Core: Aluminium Wire Armoured (AWA) Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA)
Sheath: PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR
Colour: Red or Black
Temperature Rating: 0°C to 90°C
Minimum Bending Radius:

Single Core: 15 x overall diameter

Three Core: 12 x overall diameter

(Single Core 12 x overall diameter and 3 core 10 x overall diameter where bands are positioned adjacent to joint or terminations provided that the bending is carefully controlled by the use of a former)

 

 

6. N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES Models

Model

Voltage

Name

Standards

YJV YJLV

3.6/6kV

6/6kV

6/10kV

8.7/10kV

8.7/15kV

12/20kV

18/30kV

21/35kV

26/35kV

Copper (Aluminum) conductor XLPE insulated PVC sheath power cable

IEC60502-1

GB/T 12706

YJV22 YJLV22

Copper (Aluminum) conductor XLPE insulated Steel tape armored PVC sheath power cable

YJV62 YJLV62

Copper (Aluminum) conductor XLPE insulated Non-magnet steel tape armored PVC sheath power cable

ZA(B, C)-YJV

ZA(B, C)-YJLV

Copper (Aluminum) conductor XLPE insulated PVC sheath flame-retardant power cable

ZA(B, C)-YJV22

ZA(B, C)-YJLV22

Copper (Aluminum) conductor XLPE insulated Steel tape armored PVC sheath flame-retardant power cable

ZA(B, C)-YJV62

ZA(B, C)-YJLV62

Copper (Aluminum) conductor XLPE insulated Non-magnet steel tape armored PVC sheath flame-retardant power cable

WDZ-YJY

Copper conductor XLPE insulated LSHF power cable

WDZ-YJY23

Copper conductor XLPE insulated Steel tape armored LSHF power cable

WDZ-YJY63

Copper conductor XLPE insulated Non-magnet steel tape armored LSHF power cable

Notes:

1. Non-magnet steel tape armored is used for single core cable. Figure 6 in the models means “armored”.

2. Flame-retardant grades are A, B and C, which can be chosen according to requirements.

 

Packaging & Shipping

 

N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES Packaging & shipping

Packaging

Packaging available on 500 or 1000 metres
Wooden & steel drums

Shipping:
Port: Tianjin, Qingdao, Shanghai or other ports as per your requirements.

Sea freight:
FOB/C&F/CIF/DDU quotation are all available.

 

Our Services

 

Our service

we are one of the biggest manufacture in china mainland. We will give you a perfect shopping experience . If you need visit our factory , we will meet you at the airport or train station.

Also we can offer other service 

Custom Merchandise:we can make cable as your need include the color ,size and so on.we also offer OEM .

Complete Course Tracking:we can offer you the service from the business begin to you get the cable and use it .

 

Company Information

 

Company information

Cable sample: we can offer the sample free .

Zhengzhou hongda cable Co., Ltd.
Established Year:1999
Registered capital of RMB:5,000,000
Factory Area:300,000m2

Main products:

Areial bundle cable ,XLPE insulated power cable ,PVC insulated power cable ,electrical wire ,bare aluminum conductor(AAC AAAC ACSR )and so on

Main export county:

USA Philippines Malaysia Indonesia Venezuela, Colombia  Mexico

Dominica  India  South  Africa  Zambia  Kenya and so on .

 

Why Choose Us

1. We have a large production base, and advanced production equipment 
2.  Have an competitive price and high quality
3.  Excellent after-sale service
4.  Attractive design and various styles
5.  Free issue:packaging list,invoice,CD installation
6.  Powerful technology R&D team
7.  Strict quality assurance system and perfect testing means
8.  Advanced process equipment
9.  Painted with powerful antiseptic Anticorrosion material paints
10. Delivery on  time
11. Our roller coaster sales to Middle East,Africa,Russia,Southeast Asia, etc.
12.We have a good reputation in the overseas

 

Contact Information

N2XSY 3.6/6 kV XLPE INSULATED SINGLE -CORE CABLES Contact information

 

Any needs or question ,please contact us ,we will be more pleasure to service you.

Skype ID: xinyuanyy
Cellphone/WhatsApp/Wechat/ICQ: +86 158 3829 0725

Facebook: xin.yuan.73307

We are looking forward to your inquiry and nice cooperaton.

]]> https://www.baoliyy.com/n2xsy-3-6-6-kv-xlpe-insulated-single-core-cables-with-copper-conductor-medium-voltage-cables/feed/ 0