Get more information connect with 

Tina

Mobile: +86 157 3715 6317 (WhatsApp / Wechat)

Email: tina@ hdcable.com.cn

1. Appliction

    These requiremnets cover Type USE and USE-2 (below-ground) and Type SE (above-ground) power cable for installation in accordance with Article 338 and other applicable parts of the National Electrical Code (NEC). These cables are for the service-entrance and other (NEC) uses described in 1.4 1.8. In a multiple-conductor cable that is other than submersible-pump cable and does not have a grounding conductor it is appropriate to have one circuit conductor without insulation. It is also appropriate for a sunmersibe pump cable to have a grounding conductor and for Type USE and USE-2 cables to have an insulated grounding conductor. Each insulated conductor in these cables is rated for 600V. Type USE cable has thermose insulation, except for HDPE portion of HDPE-over-XLPE insulation where used for single-conductor Type USE cable. Type USE cable has thermoset or thermoplatic insulation.

 

2. Specification

    Type SE cable meets or exceeds UL Standard 44 for XHHW-2 conductors or UL 83 for THW conductors, UL Standard 854.

 

3. Construction

    Type SE cable is constructed with sunlight resistant Type XHHW-2 conductor or Type THW conductors. Copper conductors are annealed (soft) copper. Cable assembly plus reinforcement tape are jacketed with sunlight resistant thermoset or thermoplastic material, available as 1 conductor with a concetric ground, 2 conductor with a round and flat or concentric round, or 3 conductor with a bare ground. SE cable is jacketed with gray sunlight resistant thermoset or thermoplastic material.

 

4. Type

    Single core type round with full neutral entrance cable

    Single core type round with less neutral entrance cable

    Single core type round with full neutral and communication cores entrance cable

    Two core type Flat with full neutral entrance cable

    Two core type round with full neutral entrance cable

    Three core type round with full neutral and communication cores entrance cable

    Three core type round with less neutral entrance cable

We can design and produce according to client's requiremnet.

 

Get more information connect with 

Tina

Mobile: +86 157 3715 6317 (WhatsApp / Wechat)

Email: tina@ hdcable.com.cn

 

 Packing 

Steel wooden drum (fumigation)
Cable length in each drum: 1000m/2000m or as per actual cable length requirements.

 Drum size:
As per cable length and container size
*In order to quote you accurate price, kindly tell us your needed cable length quantity. Larger quantity, more discount benefit ready for you!

Shipping Port:

Tianjin, Qingdao, or other ports as per your requireents.

Sea freight:
FOB/C&F/CIF quotation are all available.

 

*For some countries such as Africa countries, middle east countries, our sea freight quotation is much cheaper than clients get from local shipping agency.

 Tina 

HENEN HONGDA CABLE CO., LTD.
Office: 21/F, Yaxing Times Square, Songshan Road, Erqi Zone, Zhengzhou 450000, China
Factory: Huijin Rd & Changping Rd, East Development Zone, Zhandian, Jiaozuo 454950, China.
Tel: +86 371 6097 5619 | Fax: +86 371 6097 5616
Email: tina @ hdcable.com.cn
Mobile: +86 15737156317 (WhatsApp / Wechat)
Skype ID: tinatian201603 

 

 UL854 Copper Conductor  Insulation 600V USE-2 Solar Service Entrance Cable

Top ten cable manufacturer in China
Largest cable manufacturer in north China
Annual export volume exceed 200million USD
With UL,TUV,KEMA,CE,BV,PSB,SABS,LLOYD'S,GL,NK,KR,ABS  Products certifications
With TUV type testing report
Wide products range
ISO9001,ISO18001,OHSAS18001 system certifications
CNAS approval  laboratory

 SE-U    

Applications:

HUATONG Service Entrance Cable Type SE, with rated voltage 600V, is used to transmit power from the junction box to the meter base and from the meter base to the distribution cabinet
It may be used in all applications where Type SE cable is permitted.Type SE cable could be used in dry or wet environmet at the working temperature not exceed 90C.

 

Standard:

ASTM-B-800 and B-801
UL Standard 44 for XHHW-2
UL Standard 854 for SER/SRU
RoHS environmental conductive requirement

 

Product Charactors:

Conductor/Insuation:XHHW-2 THHN
Jacket: Sunlight resistant,moisture resistant and flame retardant
Temperature Range: Temperature of 90C in wet and dry locations
Environmental: Free of harmful heavy metals in compliance with ROHS
Voltage Rating:600Volt

 

Specification:

It is made up of two conductors that are stranded and insulated using cross-linked polyethylene. The insulation is both water and heat resistant. The wire is cabled together using served uncovered copper conductors. Its core is covered with binder tape that is flame retardant and it has a gray polyvinyl chloride (PVC) jacket. Its cross-linked polyethylene is a type XHHW-2.

             SE-R           

USE/USE-2    

  

 

 

Available in 500 ft. coils1000ft. reels and long lengths.

 

 We are one of China top rank cable&wire manufacturer.Our products meet standards of GB, IEC,DIN ASTM, JIS, NF, AS/NZS CSA GOST and so on. At thte same time, we have obtained ISO9001,ISO14001,OHSAS18001, UL,CE,KEMA, TUV, Bureau Veritas, Lloyd,IEC,GL,SA,NK,KR certificates. 

1.25 years production experience and 16 years export experience .
2.Products certification :UL,CE,BV,TUV,KEMA,PSB,SABS,ABS,NK,LR,KR,GL etc
3. OEM service available based on official & legal authorization.
4.Strict quality control system.
5.Rapid delivery and feedback  Faster lead time than our competitors.
6.Excellent quality with reasonable price.
7. Strong technical support (technical data, drawing, etc.)
8.Professional teamwork service for you actively.
9.Stock available, Free sample is available.

(1).When can I get the price?
We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your e-mail so that we will regard your inquiry priority.
(2).How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.
(3).How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express  account or prepay us if you do not have an account.
(4).What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.