240mm2 armoured cable – JYTOP Cable

Manufacture LV/MV cable electric 240mm2 cable/armoured cable

admin — Tue, 21 Jun 2022 01:01:37 +0000

Manufacture LV/MV cable electric 240mm2 cable / armoured cable

Manufacture LV/MV cable electric 240mm2 cable/armoured cable
1.Conductor material: Cu
2.Type: Low voltage / Mediun voltage
3.Insulation material: PVC/XLPE

Specification of LV/MV cable electric 240mm2 cable/armoured cable:

Conductor		Structure	Application
Cu	Al	Structure	Application
YJV	YJLV	XLPE insulation PVC sheath power cable (Cu/XLPE/PVC)	To be laid indoors, in tunnel, cable furrow or pipe, the cable couldn't bear mechanical force outside
YJY	YJLY	XLPE insulation PE sheath power cable (Cu/XLPE/PE)
YJV22	YJLV22	XLPE insulation, steel tape armor, PVC sheath power cable (Cu/XLPE/PVC/STA/PVC)	To be laid underground, the cable could bear certain mechanical force, but it couldn't bear great pulling force.
YJV23	YJLV23	XLPE insulation, steel tape armor, PE sheath power cable (Cu/XLPE/PVC/STA/PE)
YJV62	YJLV62	XLPE insulation, no magnetism steel tape armor, PE sheath power cable
YJV32	YJLV32	XLPE insulation, thin steel-wire armor, PVC sheath power cable (Cu/XLPE/PVC/SWA/PVC)	Be applicable to the well, water inside and fall in the bad soil, the cable cans bear the equal dint outside the machine with pull the dint .
YJV72	YJLV72	XLPE insulation, have no the magnetism thick steel-wire armor, PVC sheath power cable
YJV42	YJLV42	XLPE insulation, thick steel-wire armor, PVC sheath power cable	Be applicable to the well, underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint.

Application characteristics of LV/MV cable electric 240mm2 cable/armoured cable:

1 Rated voltages: 0.6/1 kV~26/35 kV

2 The ambient temperature for installation: ≥0°C

3 Maximum conductor temperature in normal operation:≤90°C

4 Max operating temperature of con. When cable short-circuited (5s maximum duration): 250°C

5 Permissible bending radius:

Single cable: [20(D+d) ±5%] mm

Multi cable:[15(D+d) ±5%] mm

Pictures of LV/MV cable electric 240mm2 cable/armoured cable:

Structure of Manufacture LV/MV cable electric 240mm2 cable/armoured cable:

Packageing of Manufacture LV/MV cable electric 240mm2 cable/armoured cable:

Manufacture LV/MV cable electric 240mm2 cable/armoured cable, pls fee free to contact me:

Echo Wang

Mobile/ Wechat: 0086-15106980528

Skype: hongliangcablesales7

QQ: 469855079

E: echo($)hldlcable.com

Welcome your inquiry of LV/MV cable electric 240mm2 cable/armoured cable ~ ~ ~

0.6/1kV 4C*240mm2 ARMORED Cable

admin — Tue, 21 Jun 2022 01:00:48 +0000

0.6/1KV Cu/XLPE/SWA/PVC 4C*240mm2 Cable armoured cable

Jessie Li / Hongliang Cable/ skype: hongliangcablesales8 / jessie(at)hldlcable.com / 0086-15254112213

Product Description

Brief Introduction for 4C*240mm2 Cable armoured cable

4C*240mm2 Cable armoured cable are applicable for power transmission through the power line of rated voltage 1kV and below, and 4C*240mm2 Cable armoured cable is proper to lay these cables in the fixed places, such as hotels, stations, chemical engineering and oil platforms, mines, power plants, metros, and high buildings, etc.

Construction for 4C*240mm2 Cable armoured cable

Conductor: copper

Insulation:PVC

Armor: SWA or STA

Sheath:PVC

Character: flame retardant, fire resistance

specification of 4C*240mm2 Cable armoured cable

Type	VV32, VLV32, Cu/PVC/SWA/PVC, Al/PVC/SWA/PVC
Voltage	0.6/1 kV
Cores	1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E
Range of Nominal cross section	1.5 mm2 – 630 mm2
Application	4C240mm2 Cable armoured cable applies to electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1 kV. 4C240mm2 Cable armoured cable is used for laying indoors, in tunnel, cable trench, well or direct in ground, able to bear external mechanical forces, and certain force
Standard	IEC 60502, BS 7870, GB/T12706
Constructions	Conductor:	Class 1/2 annealed bare copper solid or strands
	Insulation:	PVC
	Armour:	SWA (Remark: for single core the armour should be AWA or SSWA)
	Sheath:	PVC or PE
Max. Operating Temperature	70 ℃, can be 90 ℃ and 110 ℃ as per requirement
Packing	Wooden drum or as per requirement
Production Capacity	30 kilometer / day
MOQ	1000 meters for small size, 500 meters for big size.
Delivery time	10 – 15 working days
Remark	4C*240mm2 Cable armoured cable can be of flame retardance, fire resistance, environment friendly or other property

4C*240mm2 Cable armoured cable product show :

Main Products including 4C*240mm2 Cable armoured cable
Below 35kV XLPE insulated cables, Armored cables, Control cables, Rubber cables, PVC insulated wires and cables, BV wire,House wire; Bare stranded conductors(AAC,ACSR,AAAC,ACAR); etc.

4C*240mm2 Cable armoured cable processing of armouring:

4C*240mm2 Cable armoured cable's packing Details:

4C*240mm2 Cable armoured cable prompt delivery:

4C*240mm2 Cable armoured cable workshop:

18/30(36) KV 3 Core 120mm2 150mm2 185mm2 240mm2 XLPE insulated Armoured Power Cable

admin — Tue, 21 Jun 2022 00:52:53 +0000

18/30(36) KV 3 Core 120mm2 150mm2 185mm2 240mm2 XLPE insulated Armoured Power Cable

Product Description

Construction for XLPE insulated Power Cable

1.Conductor:
Plain circular compacted copper or aluminium conductor, according to IEC.

2.Conductor Screen:
Extruded semi-conductive compound.

3.Insulation:
Extruded XLPE rated cross-linked dry curing (triple cross head).

4.Insulation Screen:
Non-metallic part: Extruded semi-conductive compound.Colour narrow tape for each core under metallic screen for identification.

5.Metallic Screen:
Copper tape and /or copper wires for each core to achieve screen area to withstand short circuit current.

6.Assembly;
The three cores are assembled together with non hygroscopic polypropylene yarns as fillers to form compacted circular.

7.Inner covering:
Extruded pvc as bedding under armour.

8.Armour:
Double steel tapes armour (STA) applied helically over the PVC bedding.

9.Outer Sheath:
Black or red protective jacket PVC or PE corrosion and sunlight resistant. The cables are designed and tested according to IEC specification standard IEC 60228, 60502-2 and 60811.

Standard of XLPE insulated Power Cable

International: IEC 60502-2, IEC 60228

China: GB/T 12706.2-2008

Other standards such as BS,DIN and ICEA upon request

Application for XLPE insulated Power Cable

Power cable is applicable for power transmission through the power line of rated voltage 1kV and below, and it is proper to lay these cables in the fixed places, such as hotels, stations, chemical engineering and oil platforms, mines, power plants, metros, and high buildings, etc.

Laying conditions:

Ground temperature 35 °C, Depth of laying 0.8m ,Ground thermal resistivity, 1.2 °C.m/w, Ambient temperature 40 °C.

Producr range of Power cable

Type	Cu/XLPE/SWA(STA)/PVC, Al/XLPE/SWA(STA)/PVC
Voltage	0.6/1 kV
Cores	1C, 2C, 3C, 4C, 5C, 3C+1E,4C+1E, 3C+2E
Range of Nominal cross section	1.5 mm2 – 630 mm2
Application	XLPE insulated power cable applies to electrical power transmission and distribution lines with AC rated voltage U0/U up to and including 0.6/1 kV. For laying indoors, in tunnel, cable trench, well or direct in ground, able to bear external mechanical forces, and certain force
Standard	IEC 60502, BS 7870, GB/T12706

Workshop for XLPE insulated STA Armoured Power Cable

Package for XLPE insulated STA Armoured Power Cable

About the supplier

Wendy Jiang- Sale engineer

TEL: 0086-531-88814697

FAX: 0086-531-88876156

MOB: 0086-18253153062

SKYPE:hongliangcablesales3

EMAIL: wendy(at)hldlcable.com

Send Your Inquiry Details in the Below for Free Sample, Click "Send" now!

10 kv three cores 240mm2 armoured cable

admin — Wed, 18 Sep 2019 03:17:40 +0000

armoured cable

10 kv three cores 240mm2 armoured cable

Product description of armoured cable

Brief Introduction

PVC/XLPE power cable is used to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

Standard

The products can be produced according to our factory specification which is equivalent to the standard IEC60502.The factory can also design and manufacture special power cable according to the other standards required by the customers.

Properties of PVC Power Cable

1.The long-time permissible working temperature of cable conductive core is not more than 70 degrees.

2.During short circuit (max permanent time is not more than 5 seconds), the max temperature of cable conductor is not more than 165°C.
3.The difference level of laying cable is not restricted.When laying the cable,ambient temperature is not lower than 0°C.
4.They have good chemical stability,and properties of acid resistance,alkali resistance,salt resistance,oil resistance,solvent resistance and flame resistance.

Properties of XLPE Power Cable

1.The highest allowed operating temperature of conductor for long-term working is 90 degrees.

2.In short circuit (Max long term is no more than 5 seconds). The highest temperature for conductor is no more than 250 degrees.

3.The cable is laid without horizontal drop limit. The environment temperature should be no lower than 0 when lay. Otherwise it should be preheated.

4.Excellent electrical performance, resistance to chemical corrosion.

5.Can stand advisable traction when laid.Can stand traction from Outside.Left low smoke halogen-free after burned.Retard the burning of the cable.

Nominal Cross-sectional Areas

1.5 mm2 , 2.5 mm2 ,4 mm2 , 6 mm2 , 10 mm2 , 16 mm2 ,25 mm2 , 35 mm2 , 50 mm2 ,70 mm2 ,

95 mm2 ,120 mm2 ,150 mm2 ,185 mm2 ,240 mm2 ,300 mm2 400 mm2 , 500 mm2 , 630 mm2 ,

800 mm2

Production range

Single core cable: from 1.5 mm2 to 800 mm2,

Multi-core cable: from 1.5 mm2 to 400 mm2

Technical Data:

Four cores:

3+1 cores:

Factory Show:

Package And Transportation:

Products Certifications:

Testing Equipment:

Technical quality Team:

We are specializing in the production of cables and wires,the spirt of us is "quality first, reputation first, service first, customer first"

10 kv three cores 240mm2 armoured cable

admin — Thu, 05 Sep 2019 12:04:33 +0000

10 kv three cores 240mm2 armoured cable

Product Description

1. 10 kv three cores 240mm2 armoured cable Use:

This product is applicable to 6 ~ 35kV power transmission and distribution system for the transmission and distribution of electric energy use. Widely used in electric power, construction, mining, metallurgy, petrochemical, transportation and other sectors, has completely replaced the oil impregnated paper insulated power cables and replace PVC insulated power cable.

2. 10 kv three cores 240mm2 armoured cable Standards:

This product is manufactured according to GB/T12706, equivalent to IEC60502 or BS, DIN, ICEA standard as to customer’s requests.
D.C Resistance of the conductor complies with the stipulations of GB/T3956.
Flame-retardant properties of the cable comply with Grade A, B and C of GB/T19666-2005, equivalent to IEC60332.

3. 10 kv three cores 240mm2 armoured cable Voltage Test and Partial Discharge Test

Rate
Voltage Uo(kv)

Item

0.6/1

1.8/3

3.6/6

6/6
6/10

8.7/10
8.7/15

12/20

18/20
18/30

21/35

26/35

Voltage

Test Voltage

3.5

6.5

12.5

30.5

73.5

Test Time

Partial Discharge Test

Test Voltage

–

6.2

10.4

15.1

20.8

31.1

36.3

Discharge Capacity

–

4. 10 kv three cores 240mm2 armoured cable structure

5. Product Description for 10 kv three cores 240mm2 armoured cable :

10 kv three cores 240mm2 armoured cable Reference Standards:	IEC60502-2, IEC 60228, IEC60332 -1/2/3, BS6622, BS7835, VDE0276, AS/NZS 1429.1, GB/T 12706, etc.
Rated Voltage:	6/10kV, 6.35/11kV (12kV), 8.7/15kV, 12/20kV, 18/30kV,19/33kV
Core Number:	Single Core or Three Core (1C or 3C)
Available Dimensions:	25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.
Codes Available:	N2XSY, N2XSEY, NA2XSY, NA2XSEY, N2XSRY, NA2XSRY, N2XSEBY, N2XSEYBY, NA2XSEBY, N2XSERY, NA2XSERY, N2XSEYRGbY, NA2XSEYRGbY, N2XS(F)2Y, NA 2XS(F)2Y, N2XS(FL)2Y, N2XSH, N2XSYRY
Codes Available:	YJV, YJLV, YJSV, YJLSV, YJV72, YJLV72, YJSV72, YJLSV72, YJV22, YJLV22, YJSV22, YJLSV22, YJV32, YJLV32, YJSV32, YJLSV32
Application:	For power networks, underground, outdoors and in cable ducting. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation.
10 kv three cores 240mm2 armoured cable Construction:
Conductor:	Stranded round compacted copper or aluminum conductor (Cu / Al ), copper wire annealed.
Conductor Screen:	Semi-conducting material
Insulation:	XLPE (Cross-Linked Polyethylene)
Insulation Screen:	Semi-conducting material
Metallic Screen:	Copper tape screen or copper wire screen (CTS / CWS )
Filler:	PP rope
Separator:	Binding tape
Bedding:	PVC (Polyvinyl Chloride)
Armouring:	Single Core: Aluminium Wire Armoured (AWA) Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA)
Sheath:	PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR
Colour:	Red or Black
Temperature Rating:	0°C to 90°C
Minimum Bending Radius:	Single Core: 15 x overall diameter Three Core: 12 x overall diameter (Single Core 12 x overall diameter and 3 core 10 x overall diameter where bands are positioned adjacent to joint or terminations provided that the bending is carefully controlled by the use of a former)

6. 10 kv three cores 240mm2 armoured cable Models

Model	Voltage	Name	Standards
YJV YJLV	3.6/6kV 6/6kV 6/10kV 8.7/10kV 8.7/15kV 12/20kV 18/30kV 21/35kV 26/35kV	Copper (Aluminum) conductor XLPE insulated PVC sheath power cable	IEC60502-1 GB/T 12706
YJV22 YJLV22		Copper (Aluminum) conductor XLPE insulated Steel tape armored PVC sheath power cable
YJV62 YJLV62		Copper (Aluminum) conductor XLPE insulated Non-magnet steel tape armored PVC sheath power cable
ZA(B, C)-YJV ZA(B, C)-YJLV		Copper (Aluminum) conductor XLPE insulated PVC sheath flame-retardant power cable
ZA(B, C)-YJV22 ZA(B, C)-YJLV22		Copper (Aluminum) conductor XLPE insulated Steel tape armored PVC sheath flame-retardant power cable
ZA(B, C)-YJV62 ZA(B, C)-YJLV62		Copper (Aluminum) conductor XLPE insulated Non-magnet steel tape armored PVC sheath flame-retardant power cable
WDZ-YJY		Copper conductor XLPE insulated LSHF power cable
WDZ-YJY23		Copper conductor XLPE insulated Steel tape armored LSHF power cable
WDZ-YJY63		Copper conductor XLPE insulated Non-magnet steel tape armored LSHF power cable

Notes:

1. Non-magnet steel tape armored is used for single core cable. Figure 6 in the models means “armored”.

2. Flame-retardant grades are A, B and C, which can be chosen according to requirements.

Packaging & Shipping

10 kv three cores 240mm2 armoured cable Packaging & shipping

Packaging Detail: export wooden steel drum ,wooden iron drum and other export standard package

Delivery Detail: 10 days and also depend on the quantity

Our Services

Our service

we are one of the biggest manufacture in china mainland. We will give you a perfect shopping experience . If you need visit our factory , we will meet you at the airport or train station.

Also we can offer other service

Custom Merchandise:we can make cable as your need include the color ,size and so on.we also offer OEM .

Complete Course Tracking:we can offer you the service from the business begin to you get the cable and use it .

10 kv three cores 240mm2 armoured cable Contact information

Any needs or question ,please contact us ,we will be more pleasure to service you.

Skype ID: xinyuanyy
Cellphone/WhatsApp/Wechat/ICQ: +86 158 3829 0725

Facebook: xin.yuan.73307

We are looking forward to your inquiry and nice cooperaton.